What are the length, width, and height of the Toyota Yaris L?

1 Answers
VonJune
07/29/25 5:34pm
The length, width, and height dimensions of the Toyota Yaris L are 4160mm × 1700mm × 1495mm. Below is the relevant introduction of the Toyota Yaris L: 1. Exterior: The length, width, and height dimensions are 4160mm × 1700mm × 1495mm, with a wheelbase of 2550mm. 2. Powertrain: It is equipped with a 1.5L naturally aspirated four-cylinder engine, delivering a maximum power of 82kW (112Ps) and a maximum torque of 139N·m, meeting the China VI emission standards. It is paired with a CVT continuously variable transmission that can simulate 8 gears, with an official combined fuel consumption of 5L per 100 kilometers.
Was this review help?
18
0
Share
More Forum Discussions

How to Adjust the Audio in the 10th Generation Civic?

Methods for adjusting the audio in the 10th Generation Civic: When adjusting the audio, click to enter the menu on the panel and make adjustments according to your preferences. In terms of body dimensions, the car measures 4649mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm. The Civic is a compact car launched by Honda. Compared to other models in the same class, this car offers relatively good space performance. In terms of configuration, the front and rear seats are filled with soft materials, which can effectively alleviate driving fatigue. The 9-inch central control color screen integrates rich functions such as GPS navigation, Bluetooth, rearview camera, and multimedia, and also supports smartphone mirroring.
6
1
Share

What do h4l and h4f mean?

h4l and h4f refer to High-speed 4WD (4-wheel drive) and Full-time 4WD respectively. In Full-time 4WD mode, all four wheels of the vehicle are powered, and the wheels can have speed differences. In High-speed 4WD mode, all four wheels are also powered, but the front and rear differentials are locked. Many high-performance off-road vehicles offer different 4WD modes. The basic 4WD modes include Full-time 4WD, High-speed 4WD, and Low-speed 4WD. When the vehicle switches to Low-speed 4WD mode, the wheel torque is amplified, which helps the vehicle escape difficult terrain more effectively. All vehicles are equipped with differentials. When turning, the left and right wheels rotate at different speeds. When the differential is engaged, power is evenly distributed to the left and right tires, enabling the vehicle to quickly free itself from challenging situations.
6
2
Share

What are the tips for controlling the clutch in Subject 2?

Tips for controlling the clutch in Subject 2: 1. Press down quickly and lift slowly, pause slightly midway to find the contact point; 2. Maintain a gentle pressure above the contact point, and lift the pedal smoothly for engagement. The working principle of the clutch is to temporarily separate and gradually engage the engine with the transmission by pressing or releasing the clutch pedal, thereby cutting off or transmitting the power from the engine to the transmission. The clutch has three working states: disengagement when the clutch is pressed down, full engagement when the clutch is not pressed down, and semi-engagement when the clutch is partially pressed down. Semi-engagement is the decisive factor affecting whether the engine's kinetic energy can be transmitted to the wheels. Many people experience unstable speeds or even stalling because they cannot accurately master the semi-engagement state, pressing or releasing the clutch too much.
20
1
Share

Where is the car trunk switch generally located?

Car trunk switches are generally located near the license plate light of the trunk. If there is no switch in this area, there will definitely be a trunk switch on the driver's side door. Most cars can also open the trunk using the remote key. The car trunk is a storage space, which is very important for consumers. Precautions for using the car trunk: 1. Before opening the trunk, make sure there are no obstacles, ceilings, rear walls, etc. within the opening range to prevent scratches caused by opening the trunk without noticing obstacles; 2. When the trunk is fully closed, it will emit a "beep" alarm sound. Do not start the vehicle before hearing the closing alarm to prevent accidents caused by an unsecured trunk; 3. When the trunk malfunctions, it is necessary to have it maintained at an authorized service center.
10
2
Share

Where is the drainage hole in a car trunk?

The drainage hole in a car trunk is located beneath the spare tire in the trunk, which is the lowest level of the trunk. The trunk's drainage hole is typically sealed with a rubber plug to prevent rainwater from flowing back into the car. Removing the rubber plug allows for drainage. Generally, there are one or two drainage holes designed in the trunk. The main drainage holes in a car include: 1. Engine drainage hole: Usually located at the rear of the engine compartment, visible below the front windshield; 2. Door drainage hole: Found at the bottom of the door, sealed by a rubber strip; 3. Sunroof drainage hole: Hidden around the edges of the sunroof, connected to the car's A-pillar and C-pillar via tubes, allowing rainwater to flow out along the A and C pillars during rain.
14
1
Share

How much weight can a sedan trunk hold?

There is no specified weight limit for a sedan trunk. The vehicle's manual provides the curb weight and gross vehicle weight. Subtracting these two figures and then deducting 400kg generally gives the trunk's maximum capacity. Typically, a sedan trunk can hold around 100kg. For a standard sedan (three-box design), the trunk can carry items weighing between 100 to 150 kilograms. If it's a hatchback (two-box design), the trunk usually has a maximum capacity of under 80 kilograms. Common items to keep in the trunk include a tow rope, basic medications, band-aids, and other emergency supplies. Car owners can store these items in the trunk long-term for unexpected needs, as the trunk can also serve as an escape route in critical situations.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.