What are the length, width, and height of the Lavida car?

2 Answers
VonCarlos
07/29/25 4:04am
The length, width, and height of the Lavida car are: 4670mm, 1806mm, 1474mm, with a minimum ground clearance of 110mm and a wheelbase of 2668mm. It is a 4-door, 5-seater compact sedan under the Volkswagen brand. Its front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. The Lavida is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150ps and a maximum power of 110kw. The maximum torque speed ranges from 1750 to 3000rpm, paired with a 7-speed dual-clutch transmission.
Was this review help?
4
1
Share
LaRebecca
08/12/25 7:50am
I've been driving the Lavida for a while now, and I remember its dimensions are approximately 4670mm in length, 1806mm in width, and 1474mm in height. This size is quite practical for daily use. With a length just under 4.7 meters, parking in residential areas or shopping malls isn't too difficult. The width is just over 1.8 meters, so navigating through narrow city streets isn't a concern. The height of 1.47 meters provides some headroom inside, avoiding any feeling of confinement. The cabin is designed to be spacious, with ample legroom in the back seats, making it comfortable even with four passengers. The trunk is large enough to fit several suitcases for trips. Overall, the dimensions are well-balanced—it's not as fuel-consuming as a large SUV, stable on highways, and has low wind resistance for better fuel efficiency. It's perfect for commuters like me and family use, offering easy handling and straightforward maintenance.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How to distinguish between the big V and small V in Reiz?

The method to distinguish between the big V and small V in Reiz is based on their engine displacement. The big V has a 3.0L displacement, while the small V has a 2.5L displacement. Below is an introduction to the Reiz: 1. The Reiz is the domestic name for the Japanese Toyota MARK-X model. It is produced on the same production line as the Crown at Tianjin FAW Toyota Plant 2, sharing the same chassis and equipped with the same six-speed automatic transmission as the Crown. 2. The MARK-X is the successor to the MARK-II. It features a front-engine, rear-wheel-drive design, equipped with Toyota's advanced, reliable, and durable 2500CC V6 and 3000CC V6 engines. It also includes a finely crafted and highly complex six-speed automatic transmission with a cutting-edge manual/automatic shift panel system in a serpentine layout, as well as a rear-wheel-drive system.
15
3
Share

What are the causes of excessive friction in the BMW 5 Series steering gear?

BMW 5 Series steering gear excessive friction causes: Low-quality lubricating oil leads to poor lubrication effect. Mechanical steering system: The mechanical steering system uses the driver's physical strength as the steering energy source, consisting of steering control mechanism, steering gear and steering transmission mechanism. The series of components from steering wheel to steering transmission shaft belong to the steering control mechanism, while the series of parts from steering knuckle arm to steering trapezoid belong to the steering transmission mechanism. Power steering system: The power steering system uses both driver's physical strength and engine power as steering energy sources. Normally, the driver only provides a small portion of the required steering energy, while most energy is provided by the engine through power steering devices. When the power steering device fails, the driver should be able to independently undertake the vehicle steering task. Therefore, the power steering system is formed by adding a set of power steering devices to the mechanical steering system.
9
0
Share

How many meters before a roundabout should you slow down when passing through?

Roundabouts are high-risk areas for traffic accidents. When approaching, you should slow down 50-100 meters before the roundabout, control your speed appropriately, and enter the roundabout in a counterclockwise direction. When driving through a roundabout, you must pay attention to the following five points: 1. Control your speed: Slow down 50-100 meters before the roundabout and adjust your speed according to the traffic conditions. 2. Observe dynamics: When approaching the roundabout, observe the movement of vehicles already inside the roundabout from the left, merge appropriately, and slow down or stop if necessary. 3. Right turn signal: Turn on the right turn signal before exiting the roundabout, and pay attention to the movement of vehicles and pedestrians on the right. 4. Outer lane: In roundabouts with two or more lanes, the inner lane is the fast lane, and the outer lane is the slow lane. When exiting, first change to the outer lane and then exit the roundabout. It is strictly prohibited to exit directly from the inner lane. 5. Turn off the signal: After exiting the roundabout normally, turn off the turn signal.
15
3
Share

Where is Baojun produced?

Baojun is an independent automotive brand established by SAIC-GM-Wuling in 2010, with its production line located at SAIC's Qingdao base. In terms of exterior design: The Baojun 360 features an overall design that adopts a brand-new design language, exuding a strong futuristic feel. The front fascia of the new car is equipped with a dot-matrix grille, significantly enhancing its sporty appearance. The sleek headlights on both sides, with their meticulously arranged internal light clusters, shine brightly when illuminated. The multi-waistline upward sweep on the side profile creates a sense of readiness, giving it a very sporty look. In terms of safety features: The Baojun 360 comes with a comprehensive array of active/passive safety configurations, including Electronic Stability Program (ESP/DSC), Electronic Brakeforce Distribution (EBD), Hill Start Assist, Brake Assist (EBA/BAS), Tire Pressure Monitoring, Rear Parking Radar, Anti-lock Braking System (ABS), LED Daytime Running Lights, Traction Control (ASR/TCS), and ISOFIX Child Seat Anchors.
1
5
Share

What is the reason for the sudden loud noise in the Audi A6 as speed increases?

The reason for the sudden loud noise in the Audi A6 as speed increases is: wear of the sprocket bearing shaft head or transmission oil leakage and other faults. Applying soundproofing strips to doors and seams: For Audi A6 door frame soundproofing, you can use soundproofing cotton strips, soundproofing rubber strips, or soundproofing wool felt strips applied to the door frame seams to complete the door frame soundproofing. This can effectively suppress wind noise and some external noise. Installing trunk soundproofing: Applying soundproofing materials to the trunk of the Audi A6, as well as the wheel arch areas on both sides of the trunk, can effectively reduce tire noise, road noise, and exhaust noise. It will also significantly reduce low-frequency resonance noise caused by bass. Most of the tire and road noise during low-speed driving is suppressed, greatly improving the vehicle's stability. The feeling of rattling or falling apart when driving over uneven surfaces or potholes will disappear, and the vehicle's shock absorption and cushioning performance will also be noticeably improved.
5
3
Share

Where is the heating switch of Trumpchi GS3?

The heating switch of Trumpchi GS3 is located below the car's center console. Press the TEMP temperature increase button (red) continuously to turn on the heating. The Trumpchi GS3 air conditioning system consists of a refrigeration system, heating system, ventilation and air purification devices, and a control system: 1. The ventilation system ensures indoor ventilation while the car is moving, continuously introducing fresh air into the car interior and expelling harmful gases mixed with dust, carbon dioxide, and emissions from the engine. 2. The heating system warms the air inside the car or the fresh air entering from outside, achieving the purposes of heating and dehumidification. 3. The refrigeration system lowers the interior temperature when the external environment temperature is high, making passengers feel cool and comfortable. 4. The air purification system filters the incoming air and continuously removes polluted gases from the car interior to maintain clean air inside the car. 5. The control system mainly consists of electrical components, vacuum pipelines, and operating mechanisms. Its function is to control the temperature and pressure of the refrigeration and heating systems on one hand, and to regulate the temperature, air volume, and airflow direction of the indoor air on the other, to perfect the various functions of the air conditioning system.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.