What are the length, width, and height of the Geely Boyue?

2 Answers
McEmilio
07/24/25 4:58pm
The length, width, and height dimensions of the Boyue are 4544mm/1831mm/1713mm, which are official data. The length of the Boyue refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The Boyue's turbocharged engine has a maximum power of 135kW and a maximum torque of 350 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750-4000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. This engine is paired with a wet dual-clutch transmission (DCT). The state has relevant regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
Was this review help?
1
4
Share
MaliaLee
08/11/25 9:22am
I just got a Geely Boyue, with specific dimensions of 4519 mm in length, 1831 mm in width, and 1694 mm in height. This SUV is just the right size—about 4.5 meters in length isn’t too long, making parking in the city less of a headache. The wide body gives it a stable ride, while the tall body provides ample interior space. I often go out with friends, and the back seat comfortably fits three people without feeling cramped. The trunk easily accommodates luggage and miscellaneous items. In terms of design, the height offers excellent visibility on the road, allowing me to see more, and the width helps with stable cornering without feeling floaty. I’ve driven it on mountain roads and highways, and the balanced dimensions make handling very agile, with fuel consumption well controlled—averaging around 9 liters per 100 km. Overall, these dimensions ensure both practicality and enhanced driving pleasure, which is my favorite aspect.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

How to Repair a Hole in the Rear Fender?

This depends on the specific situation. If the hole is relatively large, it is recommended to go to a 4S shop for replacement. If it is not particularly severe, welding repair can be performed. Relevant introduction to car fenders: 1. Definition: Car fenders are designed based on the tire model used by the car. The car's wheels have a steering function to ensure space during rotation. The front and rear fenders used in cars are different, and for aerodynamic considerations, the rear fender commonly has an outward convex arc. 2. Function: The fender can reduce the wind resistance generated during the car's movement, which helps with the car's stability. The fender also plays a role in protecting the chassis.
1
2
Share

Is It Serious If the White Primer Is Exposed on a Red Car?

If the primer has been exposed, it is considered a relatively serious situation. Here is an introduction to the primer: 1. The role of primer: Automotive primer is the first layer of paint applied to the car body. Generally, only after the primer is sprayed can the next painting process proceed. As a primer, its primary function is to protect the car body. The primer comes into direct contact with the car body, which is mainly made of metal, so the primer must have excellent anti-corrosion and anti-rust properties, as well as good adhesion to both the car body and the topcoat. 2. Types of primer: Currently, primers can generally be divided into immersion primers, water-based immersion primers, anodic electrophoretic primers, and cathodic electrophoretic primers. Most passenger cars use cathodic electrophoretic primers, which are usually white or gray in color, depending on the vehicle model. For example, black cars typically use white primers, while white cars use gray primers, mainly to make it easier to identify the primer when the paint is scratched. 3. Timely repair of primer: If a car is scratched, whether the primer is exposed or not, it is recommended to repair any deep scratches to prevent rust from forming over time, which would further affect the appearance. If the metal shell is scratched and the primer is exposed, it will not rust, but if the metal is exposed, even a small spot, it should be repaired promptly. Otherwise, the affected area may expand.
8
5
Share

What lights should be turned on when there are street lights?

When driving at night under well-lit street light conditions, use low beam headlights. When motor vehicles are driving at night without street lights, poor lighting, or encountering low visibility conditions such as fog, rain, snow, dust, or hail, they should turn on headlights, position lights, and rear lights. However, high beam headlights should not be used when the following vehicle is driving close to the vehicle in front in the same direction. Motor vehicles driving in foggy conditions should turn on fog lights and hazard warning flashers. Here are some precautions for night driving: 1. Pay attention to the reasonable use of lights when driving at night: When driving at night, turning on low beam headlights is sufficient for illumination. High beam headlights should only be used in special circumstances. 2. Maintain a safe distance: A longer distance than during the day should be adopted to ensure relative safety. 3. Fatigue is likely when driving for too long at night: After midnight, drowsiness is common. In such cases, it is advisable to park and rest or switch drivers. Only continue driving after physical and mental energy have been adequately restored. When parking to rest in winter, avoid sealing doors and windows and falling asleep. Ensure proper ventilation to prevent accidents.
6
2
Share

What Are Some Clever Tips for Removing Adhesive from Car Paint?

Methods for removing adhesive from car paint: 1. Essential Balm: When some highly adhesive stickers are difficult to peel off, you can use essential balm to wipe the stickers, which won't harm the car's windshield or paint. 2. Toothpaste: You can use a little toothpaste to wipe, or use an oil card to scrape off the residual adhesive. Remember not to use a blade or any sharp object to scrape, as this may scratch the windshield or paint. 3. Alcohol: Pour some alcohol to wipe, which is simple and practical, making it easy to remove stubborn stickers. However, be careful not to spray it directly on the windshield, as it may damage the car film.
10
5
Share

Why is there no sound when the navigation system is connected to Bluetooth?

Reasons for no sound when the navigation system is connected to Bluetooth: 1. The call volume on the phone is not turned on. 2. The volume on the car navigation system is not enabled. 3. The car Bluetooth device needs to establish a pairing relationship. Here is an introduction to car navigation systems: 1. Components: The car GPS navigation system consists of two parts. One part includes the GPS receiver and display device installed in the car; the other part consists of a computer control center. The two parts communicate via positioning satellites. 2. Working principle: In GPS observation, the distance from the satellite to the receiver can be obtained. Using the distance formula in three-dimensional coordinates and three satellites, three equations can be formed to solve the position of the observation point. Considering the error between the satellite clock and the receiver clock, there are actually four unknowns: X, Y, Z, and clock difference. Therefore, a fourth satellite needs to be introduced to form four equations for solving, thereby obtaining the longitude, latitude, and elevation of the observation point.
12
2
Share

Why does the car feel more powerful after changing the transmission fluid?

Transmission fluid serves multiple functions including cleaning, lubrication, rust prevention, and heat dissipation. Regularly changing the transmission fluid can clean and lubricate the gear system, extend the lifespan of the transmission components, ensure the transmission operates normally, and make gear shifts smoother and more seamless, potentially restoring the feeling of driving a new car. More details about transmission fluid are as follows: 1. Regular replacement: If the transmission fluid is not changed for a long time, it can affect the vehicle's operation. The performance of the transmission fluid will degrade, reducing its lubrication effectiveness, which accelerates the wear of transmission components and increases the likelihood of malfunctions. 2. Transmission fluid is a consumable item: Transmission fluid operates under high-speed and high-temperature conditions for extended periods, leading to deterioration and evaporation. This can exacerbate the wear of mechanical parts and, in severe cases, damage internal transmission components.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.