What are the length, width, and height of the Civic?

1 Answers
BraydenLee
07/29/25 4:59pm
The dimensions of the Civic are 4649mm in length, 1800mm in width, and 1416mm in height. Civic car colors: The tenth-generation new Civic offers consumers a choice of seven body colors: Crystal Black, Rallye Red, Lunar Silver, Dark Blue, Amber Orange, Aegean Blue, and Pearl White. The color selection is rich, with a focus on a sporty style. Rallye Red and Aegean Blue are particularly attractive, while Black and White are very enduring, and Silver is very elegant. Civic models: Honda Civic (CIVIC) has launched various models to cater to the tastes of consumers in different countries, including three-door hatchbacks, hardtop coupes, hybrid versions, and five-door sedan versions.
Was this review help?
10
4
Share
More Forum Discussions

What are the tips for starting on a slope with a 30cm distance?

After hearing the voice prompt, you need to drive forward and stay to the right. When you see the right front corner of the engine hood (about 1/3 of it) align with the roadside line, the distance between the car body and the roadside line is exactly 30cm. From the driver's seat, when the raised part of the wiper aligns with the right roadside line, the distance is approximately 30cm. Correct method for starting on a slope: When starting, shift into 1st gear, then slowly lift the clutch pedal with your left foot. After feeling the clutch engage, pause briefly, then continue to slowly lift the clutch pedal while gently pressing the accelerator pedal with your right foot. Once the clutch is fully engaged, keep your right foot on the accelerator. When the speed increases, you can shift to a higher gear. Reasons why manual transmission cars tend to stall when starting on a slope: Manual transmission cars stall during slope starts because the clutch is released too quickly. Practice is needed to improve clutch control.
12
1
Share

Should You Press the Clutch or the Brake First When Stopping at a Designated Point?

You should always press the clutch first and then the brake; otherwise, the vehicle is prone to stalling. Designated Point Stopping: Slope-designated stopping and starting is an assessment point in the driver's test. Test requirements: Stopping at a fixed position on a slope with ≥10% gradient and ≥30 meters length, examining the coordination of steering, braking, and clutch operation. The purpose is to train motor vehicle drivers to accurately judge the vehicle's position and correctly use the brake, gear, and clutch to meet the needs of stopping and starting on uphill sections. Precautions for Subject 2 Exam: There is no time limit for starting after getting into the car. First, close the door and check if the door light is off—this is crucial. Press the clutch all the way down with your left foot and hold it steady, grip the steering wheel with your right hand, adjust the seat with your left hand until your left leg is slightly bent and can exert force, and ensure the seat is stable by moving it back and forth for a test.
15
1
Share

What is the drag coefficient of the Neta U?

The drag coefficient of the Neta U is 0.3. Drag Coefficient: Air resistance is the largest and most significant external force encountered by a vehicle during motion. The air resistance coefficient, also known as the drag coefficient, is a crucial parameter for calculating a vehicle's air resistance. It is a mathematical parameter determined through wind tunnel tests and coast-down experiments, used to compute the air resistance a vehicle experiences while moving. The magnitude of the drag coefficient depends on the vehicle's shape. The larger the drag coefficient, the greater the air resistance. Modern vehicles typically have drag coefficients ranging between 0.23 and 0.5. Forms of Air Resistance: Frontal resistance occurs when airflow impacts the front of the vehicle, similar to holding a board against the wind, where most of the resistance comes from the airflow impact; Frictional resistance arises as air moves over the vehicle's surface, but at typical driving speeds, this friction is negligible; Form drag is the primary source of air resistance at high speeds. This type of resistance stems from the low-pressure area behind the vehicle—the larger this vacuum zone, the greater the resistance.
12
1
Share

Why is the BMW X3's startup sound so loud?

Startup sound loudness is a characteristic of the BMW X3. This is because the X3's four-cylinder engine uses N20 fuel injectors and has an additional high-pressure pump inside the cylinder block, resulting in louder sounds. Another reason is that one of BMW's dual exhaust pipes is equipped with a valve that remains closed at low speeds, causing higher idle RPM and louder sounds during startup. This is a normal phenomenon, and the sound will diminish after a dozen seconds. Below is relevant information about the BMW X3: 1. In terms of power, the X3 offers three 2.0T power options: low, standard, and high. The low-power version is called 25i, the standard-power version is 28i, and the high-power version is 30i. All models come with an 8AT transmission and standard all-wheel drive system. 2. The BMW X3 features a front double-ball-joint shock-absorbing suspension and rear multi-link independent suspension, equipped with an intelligent all-wheel-drive system. The central differential is a multi-plate clutch type, and the vehicle adopts a unibody structure.
9
4
Share

Is 3.0 bar tire pressure too high for Wuling mini truck?

Wuling mini truck's tire pressure of 3.0 bar exceeds the standard value and is relatively high. The standard should be maintained between 2.2 bar and 2.8 bar. Tire pressure is crucial for tires. Both excessive and insufficient pressure will shorten the tire's service life. Here are some key points about tire pressure: 1、Low tire pressure: Increases tire body deformation, easily causing cracks on the tire sidewalls while generating bending movements. This leads to excessive heat buildup, accelerating rubber aging, fatigue of the cord ply, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear. 2、High tire pressure: Causes excessive stretching deformation of tire cords, reducing the tire body's elasticity and increasing the load during driving. In case of impact, it may lead to internal cracks and blowouts. Additionally, excessive pressure accelerates tread wear and reduces puncture resistance.
6
4
Share

What is the fuel consumption per 100 kilometers for the Bentley Mulsanne 6.8t?

The Bentley Mulsanne 6.8t has a fuel consumption of approximately 20 liters per 100 kilometers. Fuel consumption per 100 kilometers: This refers to the amount of fuel a vehicle consumes when traveling a distance of 100 kilometers at a certain speed. It is a theoretical indicator for vehicles. The fuel consumption per 100 kilometers is measured by manufacturers in controlled environments using a dynamometer installed on the vehicle's chassis. The measured values are converted into speed parameters, and the vehicle is then driven at specified speeds to calculate the theoretical experimental fuel consumption data per 100 kilometers. Since most vehicles operate near their most economical speed at 90 km/h, the officially published theoretical fuel consumption is usually based on this speed. Calculating fuel consumption per 100 kilometers: The method involves filling the fuel tank when the fuel gauge light comes on, resetting the trip meter to zero, and then driving until the fuel gauge light comes on again. The amount of fuel refilled (in liters) is divided by the distance traveled (in kilometers) and multiplied by 100 to obtain the fuel consumption per 100 kilometers.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.