What are the length, width, and height of the Bluebird?

1 Answers
SanCaden
07/29/25 5:38pm
The length, width, and height of the Bluebird are 4683mm, 1780mm, and 1465mm respectively, with a wheelbase of 2700mm. The Bluebird is a sedan series launched by Nissan, positioned as a compact car. The entire Bluebird series is equipped with a 1.6-liter naturally aspirated engine codenamed HR16, which has a maximum power output of 93kW and a maximum torque of 168Nm. In terms of exterior design, the Bluebird appears more imposing after the facelift, especially the front section, which subtly hints at the Teana's boldness, making it quite striking. The Bluebird's headlights feature a 'boomerang' design, exuding a strong sense of dominance, while the smooth lines running through the entire side profile enhance its aesthetic appeal.
Was this review help?
20
2
Share
More Forum Discussions

Can You Drive with an Expired Car Insurance?

If the compulsory traffic insurance expires, you cannot drive; if it's the commercial insurance that expires, the vehicle can still be legally driven on the road. Relevant regulations: According to the "Regulations on Compulsory Traffic Accident Liability Insurance for Motor Vehicles": If the owner or manager of a motor vehicle fails to insure the motor vehicle with compulsory traffic accident liability insurance as required, the traffic management department of the public security organ shall detain the motor vehicle, notify the owner or manager to insure it as required, and impose a fine of twice the amount of the minimum liability limit premium that should be paid. The importance of insurance: If the owner causes a major accident involving third-party casualties during the period without compulsory insurance coverage, the owner will have to pay a huge amount in compensation. Therefore, owners should not overlook the importance of compulsory insurance and must pay it promptly.
16
0
Share

Are Brake Fluid and Clutch Fluid Interchangeable?

Brake fluid and clutch fluid are generally interchangeable, and in some vehicle models, they even share the same reservoir. Types of Brake Fluid: The most common types are DOT3 and DOT4. Vehicles originally using DOT3 standard can switch to DOT4, but those designed for DOT4 should not use DOT3 as a substitute, as it is toxic and corrosive to the skin. Usage Precautions: The type of fluid required is usually indicated on the reservoir cap. Ensure proper sealing to prevent exposure to air. Top up when levels are low, and replace the fluid when it becomes discolored or dirty—preferably every two years. In specialized racing scenarios, there may be dedicated clutch fluid specifically designed for clutch systems.
3
3
Share

What Causes Car Window Squeaking?

Car window squeaking can be attributed to the following reasons: Component Aging: Press the window switch button and observe the window's movement track to check for noticeable up-and-down fluctuations. If present, it's likely due to component aging, and the only solution is to replace the affected parts. Presence of Debris Particles: Over time, debris particles inevitably accumulate on the window tracks. As the window moves along these tracks, friction with the debris can cause squeaking. Apply lubricant to both sides of the window tracks to resolve this issue. Loose Screws: Loose screws can lead to squeaking in both the roof and windows, and may even pose a risk of the window falling off. Tightening the window screws can eliminate this problem.
18
1
Share

What is the typical fuel consumption per 100 kilometers for a 2.0L naturally aspirated engine?

2.0L naturally aspirated engines typically consume 8-11L of fuel per 100 kilometers. Fuel consumption per 100 kilometers parameter: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling a hundred kilometers on the road at a certain speed, serving as a theoretical indicator for the vehicle. This value is obtained by manufacturers under controlled conditions using a dynamometer installed on the vehicle's chassis to measure and convert into speed parameters, then calculating the theoretical experimental fuel consumption data for the vehicle model at specified speeds. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated based on values determined through repeated tests where the vehicle travels on specified roads at prescribed speeds and times, also known as multi-condition road cycle fuel consumption.
9
4
Share

What Causes Car Shaking After Ignition?

Car shaking after ignition can be attributed to the following reasons: Engine Misfire: Engine misfire mainly refers to one or more cylinders in the engine not functioning properly. This is usually manifested as intermittent exhaust gas flow, severe shaking of the exhaust pipe, and noticeable engine vibration, sometimes accompanied by a sputtering sound. Worn or Loose Engine Mounts: Engine mounts are rubber blocks placed between the engine and the car frame. Their purpose is to reduce vibration and provide cushioning during engine operation, as well as to secure the engine in place. Once these mounts become worn or loose, the engine's vibration will become significantly more pronounced. Replacing the engine mounts can greatly reduce this effect. Carbon Buildup Issues: Cars are inevitably prone to carbon buildup, which includes carbon deposits in the cylinders, throttle body, spark plugs, and intake system. When there is excessive carbon buildup inside the engine, the car's ignition energy, air intake efficiency, and air-fuel mixture ratio can be affected, leading to unstable power output. This results in shaking during idling and acceleration.
11
1
Share

What are the reasons for the car's inability to accelerate when stepping on the gas?

The reasons for the car's inability to accelerate when stepping on the gas are as follows: Carbon buildup: Carbon deposits on the valves, idle air control valve, intake manifold, combustion chamber, and spark plugs can cause a lack of power when accelerating. Driving in congested areas: Frequent acceleration and deceleration in heavy traffic over a long period can result in sluggish acceleration when driving again. Poor fuel quality: Using low-quality gasoline can affect the fuel filter and fuel lines, leading to insufficient fuel supply and thus poor acceleration. It can also shorten the lifespan of the catalytic converter in the exhaust system. A clogged catalytic converter will directly impact the vehicle's acceleration performance, increase fuel consumption, and cause sluggish acceleration.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.