What are the length, width, and height of the Audi Q5L?

1 Answers
PenelopeLynn
07/30/25 4:15am
The length, width, and height of the Audi Q5L are 4753mm, 1893mm, and 1659mm respectively, with a wheelbase of 2908mm. The Audi Q5L is a mid-size SUV under FAW-Volkswagen Audi, with a ground clearance of 179mm. In terms of exterior design, the front face of the car features sharp angles, with a hexagonal grille similar to the family Q7, and the overall style has shifted from the rounded shape of the old Q5 to a more aggressive look. The car is equipped with the overseas version's 2.0T gasoline engine, with a maximum output of 252 horsepower. The transmission system is matched with a 7-speed dual-clutch transmission and comes standard with the quattro all-wheel-drive system.
Was this review help?
20
1
Share
More Forum Discussions

How to fix the issue of Q5 sunroof tail not closing properly?

Audi Q5 sunroof tail not closing properly can be addressed with the following methods: 1. There might be foreign objects in the sunroof guide rails or a malfunction in the sunroof motor. If there are obstructions or insufficient lubrication in the rails, excessive resistance may prevent the sunroof from closing. Remove any foreign objects to resolve the issue. 2. When the sunroof tail does not close properly, first check the guide rails. It is likely due to insufficient lubrication. When the resistance is too high, the sunroof's automatic anti-pinch feature may activate, causing it not to close. Adding lubricant should help. 3. Check if the electric sunroof's drive motor is functioning. Listen carefully for any sounds indicating motor operation.
6
2
Share

Where is the oil filter located on a Kia K3?

The oil filter on a Kia K3 is located on the vehicle's chassis. The method for replacing the oil filter is as follows: 1. Remove the drain plug to drain the engine oil; 2. Wipe the drain plug clean and tighten it; 3. Use an oil filter wrench to loosen and remove the oil filter; 4. Apply engine oil to the O-ring of the new oil filter; 5. Screw the new oil filter into place. Precautions for replacing the oil filter include: 1. Use a filter wrench or appropriate tool when removing the oil filter to prevent damage to the threads at the connection point; 2. The oil and oil filter should be replaced simultaneously to help extend the engine's service life; 3. Do not overtighten the filter to avoid damaging the sealing gasket.
6
0
Share

Is the Cylinder Block and Cylinder Head Assembly the Engine?

The cylinder block and cylinder head can only be considered as part of the engine, not the entire engine. The following is an introduction to the functions of the cylinder block and cylinder head and the composition of the engine: Functions of the Cylinder Block and Cylinder Head: The cylinder head is used to seal the upper part of the engine and forms the combustion chamber together with the cylinder block. It has water channels connected to the cylinder block for cooling the engine. The valve assembly and spark plugs are installed on the cylinder head. Composition of the Engine: The engine of a car consists of components such as the valve cover, cylinder head, cylinder block, oil pan, crankshaft, piston, connecting rod, flywheel, etc., as well as data collectors like sensors and the ECU.
2
0
Share

How to Open the Sunroof on the Lavida?

The method to open the sunroof on the Lavida is as follows: 1. Start the vehicle by turning on the ignition; 2. Rotate the sunroof switch located on the ceiling to open it. Taking the 2021 Lavida as an example, it is a compact car with the following dimensions: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, and a curb weight of 1318kg. The 2021 Lavida features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power output of 110kW.
2
5
Share

How often should the brake pads of Golf 7 be replaced?

Golf 7 brake pads should be replaced every 40,000 kilometers. The replacement method for brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install new brake pads and tighten the guide bolts. The body dimensions of Golf 7 are: length 4296mm, width 1788mm, height 1471mm, with a wheelbase of 2636mm. It is equipped with a 1.2L naturally aspirated engine, with a maximum horsepower of 116ps, a maximum power of 85kw, and a maximum torque of 200nm, paired with a 7-speed dual-clutch transmission.
10
1
Share

What Are the Reasons for Frequent Engine Stalling While Driving?

Frequent engine stalling while driving is caused by issues in the intake system, fuel system, and ignition system. The reasons and solutions for each system are as follows: Intake System: The reasons for intake system issues include detachment of the air filter box, intake pipe, crankcase ventilation valve pipe, and crankcase intake pipe. The solution is to replace the parts. Fuel System: Fuel system malfunctions are generally due to the use of substandard fuel, leading to clogged fuel lines, damaged fuel pumps, or blocked carburetor inlets. The solution is to use qualified gasoline. Ignition System: Issues such as a clogged throttle, carbon buildup on the throttle, or abnormal throttle opening. If the problem lies with the throttle, the solution is to clean the throttle.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.