What are the length, width, and height of the Audi Q5?

How to Turn Off the Auto Start-Stop Function in the New BMW 5 Series?

The method to turn off the auto start-stop function in the new BMW 5 Series is to simply press the auto start-stop button. The auto start-stop button is located in front of the gear lever, marked with a circle containing the letter 'A' and the word 'OFF' beside it. Mid-to-high-end models are equipped with both auto start-stop and auto hold functions, eliminating the need to press the brake pedal, thus reducing foot fatigue and improving the vehicle's fuel economy. The new BMW 5 Series is available in two versions: a fuel-powered version and a plug-in hybrid version, and offers two exterior packages: the M Sport package and the Luxury package. The car's dimensions are 4998mm in length, 1901mm in width, and 1559mm in height, with a wheelbase of 3070mm.

14

1

Share

What is the National III Emission Standard?

The National III emission standard mainly refers to: HC emission value below 0.2g/km, CO emission value below 2.3g/km, NOx emission value below 0.15g/km, with no PM requirement. The National III standard is China's third-stage vehicle emission standard. The National III emission standard is equivalent to the European III emission standard, meaning the content of tailpipe pollutants is equivalent to Euro III levels. The difference is that new vehicles must be equipped with an OBD, or On-Board Diagnostics system. The On-Board Diagnostics system features an increased number of detection points and detection systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter. It ensures compliance by fully monitoring vehicle emissions in real-time, thereby better guaranteeing the enforcement of the Euro III emission standard. When vehicle emissions fail to meet the Euro III standard due to factors like fuel quality, the implementation of the National III standard will increase the cost per vehicle. To stably meet the National III vehicle emission standard, vehicles must be equipped with technical measures that ensure pollutant emissions comply with the National III standard, along with the use of fuel that meets the Euro III standard. Automobile exhaust is the waste gas produced during vehicle use, containing hundreds of different compounds, including pollutants such as solid suspended particles, carbon monoxide, carbon dioxide, hydrocarbons, nitrogen oxides, lead, and sulfur oxides. As the environmental harm caused by vehicle emissions becomes increasingly severe, countries and regions around the world have successively established limits on vehicle exhaust emissions, with the European standard set by the EU serving as a reference standard adopted by most countries and regions. China's National 3 and National 4 standards are based on the Euro 3 and Euro 4 vehicle emission standards.

15

3

Share

What is the failure rate of Audi?

Audi's failure rate is 63 percent. Introduction to automotive failure rate: The automotive failure rate refers to the probability of a vehicle experiencing a failure within a unit of mileage at a certain driving distance, also known as the failure probability or failure degree. It is an important parameter for measuring the reliability of a vehicle, reflecting the degree of loss of working capability during use. Measures to reduce automotive failure rate: To ensure the good technical condition of a vehicle, it is necessary to perform careful maintenance as specified by the manufacturer during use. This includes tightening connections, lubricating lubrication points, readjusting adjustment points, and seasonal maintenance of coolant. To reduce natural degradation, adding protective agents (additives) to the lubrication system, cooling system, fuel system, manual transmission, or automatic transmission can reduce wear and corrosion, effectively extending the service life and preventing failures.

20

4

Share

What brand is catchpower tires?

catchpower is an economical tire under the Windforce Wantuchi Group. The parent company of Wantuchi tires is Qingdao Fengchi Tire Co., Ltd. Fengchi tires are mainly for export, while Wantuchi is a brand created by Fengchi Tire for the Chinese sales market. The Wantuchi catchpower series tires have good wear resistance and comfort. At the same time, the four drainage channels provide excellent driving stability and water drainage for the vehicle. Tires, together with the car's suspension system, cushion the impact forces during driving, providing good ride comfort and smoothness while ensuring excellent adhesion between the wheels and the road. Tires bear the weight of the car, making them one of the most important components of a vehicle. Tire characteristics: The tread of car tires features patterns that enhance performance, along with increased section width and lower internal pressure for better cushioning. Car tires can be structurally categorized into radial tires and bias-ply tires. Tips for choosing tires: Choose new tires of the same size as the original ones. For those who enjoy aggressive driving, tires wear out faster, so opt for more durable ones. For national highways or expressway driving: To ensure maximum safety during high-speed braking, choose tires that offer the shortest braking distances on both dry and wet roads. For comfort during long trips, select tires that provide a comfortable ride (with minimal bumps and noise). For performance, lean towards high-performance tires. For city driving: To handle various urban hazards (like pedestrians crossing the road), choose tires with the shortest braking distances on dry and wet surfaces. For long mileage life, select tires that resist deformation and sliding of tread blocks under engine power or braking forces, which wear down the rubber. Opt for tires with longer mileage life. For fuel economy, tires with lower rolling resistance can significantly reduce fuel consumption. When using catchpower tires daily, pay attention to the following: Regularly check the tire surface for cracks, deformations, or other defects. As tires wear down, the tread grooves gradually become shallow. Worn-out treads lose their water drainage and anti-skid functions, greatly reducing the car's performance. Small cracks can pose a risk of blowouts at high speeds. Also, promptly remove pebbles stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that degrade rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent and hard braking to prevent accelerated tread wear from dragging on the road.

16

0

Share

What is the displacement of the BMW x320i?

The BMW x320i has a 2-liter displacement. Factors affecting car displacement: The displacement of a car is determined by the engine. Generally, a larger displacement means the engine releases more energy per unit time (converting chemical energy from fuel into mechanical energy), resulting in better "power performance." Displacement can be considered one of the most important parameters of an engine, as it directly relates to many technical indicators. Ways to reduce car displacement: Drive smoothly and avoid sudden movements. In heavy traffic, maintain a safe distance from the vehicle ahead to prevent panic-induced dangers and avoid emergency braking. Many experienced drivers may not realize this, but emergency braking not only damages the vehicle but also increases fuel consumption. Therefore, avoiding emergency braking offers numerous benefits.

6

1

Share

What is the fuel consumption of the Audi A7?

The fuel consumption of the Audi A7 is 6.5 liters per 100 kilometers. Factors affecting fuel consumption: Incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues. Experts have conducted fuel consumption tests during acceleration and found that fuel consumption increases by 2 to 3 times compared to driving at a constant speed. Tips to reduce fuel consumption: If you want to save fuel, avoid frequent lane changes, overtaking, and merging. Besides increasing fuel consumption, these actions also raise the probability of accidents, and each gear shift consumes additional fuel. Even in traffic jams, try to queue in order. Cutting in line will only result in higher fuel consumption.

13

0

Share

What are the length, width, and height of the Audi Q5?

How to Turn Off the Auto Start-Stop Function in the New BMW 5 Series?

What is the National III Emission Standard?

What is the failure rate of Audi?

What brand is catchpower tires?

What is the displacement of the BMW x320i?

What is the fuel consumption of the Audi A7?

What to Do When the Car Makes a Squeaking Noise When the Air Conditioner is Turned On?

What is the Difference Between an Engine and a Transmission?

Which gear is M1?

How to Spray Windshield Washer Fluid in a Bora Car?