What are the length, width, and height of the 2021 new Wuling Journey?

1 Answers
AlexaDella
07/29/25 2:32pm
2021 new Wuling Journey has a length of 5150 mm, a width of 1840 mm, and a height of 1895 mm, with a wheelbase of 3180 mm. The following is an extended introduction: Exterior: The 2021 Wuling Journey features a very three-dimensional body shape, with a full front-end design. The central grille adopts an inverted trapezoidal design, the headlights use an open-eye style, the headlight clusters are very refined, and the lower air intake has a curved design. Powertrain: The 2021 Wuling Journey is equipped with a 1.5T engine, delivering a maximum power of 108kW.
Was this review help?
2
1
Share
More Forum Discussions

Can You Shift to Neutral While Driving an Automatic Transmission Car?

It is not advisable to shift to neutral while driving an automatic transmission car. The hazards of shifting to neutral while driving an automatic transmission vehicle are as follows: 1. Shifting to neutral while driving reduces the vehicle's braking force, increasing the risk of rear-end collisions. 2. When the car is coasting in neutral, the connection between the engine and the drive wheels is lost, and the car moves forward solely by inertia. In case of an emergency requiring braking, all braking force must be provided by the brakes alone. 3. Coasting in neutral can cause the engine to stall, leading to failure of the brake booster and a decrease in braking performance.
7
0
Share

Does Car Windshield Washer Fluid Need to Be Diluted with Water?

Whether car windshield washer fluid needs to be diluted with water depends on its type: 1. Non-concentrated windshield washer fluid: Usually comes in large bottles and is already pre-mixed, so no dilution is needed. 2. Concentrated windshield washer fluid: Typically packaged in small bottles, also known as wiper concentrate, requires dilution with water. The method of use is to first pour the wiper concentrate into the car's windshield washer fluid reservoir, then add an appropriate amount of purified water for dilution. Choosing scientifically formulated windshield washer fluid can achieve the following effects: 1. Cleaning performance: The surfactants in windshield washer fluid usually have functions such as wetting, penetrating, and solubilizing, thereby helping to clean and remove dirt. 2. Anti-freeze performance: The presence of alcohol and ethylene glycol in windshield washer fluid can significantly lower the freezing point of the liquid, thus providing an anti-freeze effect.
9
4
Share

What are the symptoms of a faulty clutch slave cylinder?

The main symptoms of a faulty clutch slave cylinder are difficulty in disengaging the clutch when pressed or an unusually heavy pedal feel. This is particularly noticeable when shifting gears, as the clutch may not disengage completely. Additionally, there may be occasional oil leakage from the slave cylinder. Below is an introduction to the clutch system: 1. Main function of the clutch slave cylinder: Its purpose is to gradually engage the engine with the transmission, ensuring smooth vehicle starts; temporarily disconnect the engine from the transmission to facilitate gear shifting and reduce impact during shifts; and act as a separator during emergency braking to prevent overload in the transmission system, providing a certain level of protection. 2. Repair method for clutch slave cylinder oil leakage: It is recommended to replace the entire assembly. Clutch slave cylinder oil leakage is caused by wear and tear of the internal piston, sealing rings, and cups, which fail to contain the clutch fluid. Since replacement parts for the clutch slave cylinder are not readily available, repairing with new sealing rings can be challenging, making replacement of the entire assembly the preferred solution.
20
4
Share

What are the methods for detecting the paint surface of a used car?

Here are the common methods for detecting the paint surface of a used car: 1. Use the color difference between various body cover parts to make a judgment. 2. Observe whether the car's paint surface has an orange peel effect by using the reflection principle. 3. Check for sand holes or bubbles on the paint surface by close observation. 4. Determine if there is a sagging phenomenon on the paint surface through close observation. 5. Inspect whether there is overspray on the car's rubber strips and other accessories. 6. Use modern detection tools such as a paint thickness gauge to measure the car body; a reasonable and normal detection value should be between 90~120βm; some luxury vehicles may have thicknesses greater than 120.
14
3
Share

Can You Continue Driving When the Car's Water Temperature is Too High?

You cannot continue driving when the car's water temperature is too high. If you encounter a high water temperature or warning light, you can first perform a simple check and assessment yourself: 1. Immediately pull over to the side of the road, turn on your hazard lights, and place a warning triangle to alert oncoming traffic to avoid you (especially on highways). 2. Do not turn off the engine immediately. Instead, turn the heater to its maximum setting, as this can help dissipate the engine's heat. The coolant pump is driven by the engine, so turning off the engine will stop the pump, preventing the coolant from circulating and making it harder for the engine to cool down. Continue monitoring the temperature gauge, and if the temperature does not drop, then turn off the engine. 3. Open the hood and check around the engine and radiator for any leaks. If there are leaks, you should not continue driving. Also, check if the coolant level in the auxiliary tank is too low. If it is, you can add distilled water or purified water (tap water is also acceptable). If the water temperature returns to normal after adding water, you can continue driving.
10
4
Share

What Causes White Smoke from Car Exhaust in Winter?

There are two main reasons for white smoke from car exhaust: 1. Damaged cylinder head gasket: A damaged cylinder head gasket allows coolant to enter the combustion chamber. The coolant turns into steam when heated, causing white smoke from the exhaust pipe. In this case, the gasket needs to be replaced. 2. Low engine temperature: A cold engine causes water droplets to form on the walls of the combustion chamber and intake pipe, which burn together with the air-fuel mixture, resulting in white exhaust smoke. This issue can be resolved by simply increasing the car's temperature. The main pollutants in car exhaust include carbon monoxide, nitrogen oxides, hydrocarbons, lead, sulfides, etc. Under normal conditions, white smoke should not appear.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.