What are the length, width, and height of a sedan's trunk?

1 Answers
VonLeonardo
07/30/25 10:40am
Generally, the dimensions of a sedan's trunk are approximately 1120 mm in depth, 1010 mm in width, and 560 mm in height. Here is some related information: 1. Trunk: The trunk is the area in a small car used for storing miscellaneous items, typically located at the rear of the vehicle. 2. Considerations: The trunk is a very important component of a vehicle's interior configuration, and effectively utilizing its space requires certain techniques. The order in which items are placed is crucial. The principle is to place large items at the bottom and small items on top, as well as to place heavy items in the front and lighter items at the back.
Was this review help?
8
0
Share
More Forum Discussions

Does Scrubbing the Tire Sidewall Against the Curb Have Any Impact?

Tire sidewall scrubbing against the curb does have an impact. Here are specific details regarding tire usage: 1. Avoid severe compression: The tire sidewall must not endure severe compression. The sidewall is the weakest part of the tire due to its thinness, despite having protective steel cords. If the tread wears out completely, it becomes highly dangerous and increases the risk of a blowout. 2. Do not arbitrarily change tire size: Tire dimensions should not be altered at will; it is essential to choose tires that match your vehicle. 3. Installing new tires: Always perform dynamic balancing. During driving, if the tire position is unbalanced, it can cause steering wheel vibration, which intensifies with speed. Unbalanced tires also lead to uneven wear.
10
2
Share

What does an exclamation mark in a vehicle mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the vehicle's general performance or components and functions. Main issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake system fault: An exclamation mark inside a circle with parentheses. This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal tire pressure: An exclamation mark with a horizontal line below parentheses. This represents the tire pressure monitoring warning light, which lights up when the vehicle's tire pressure is too low. Check the vehicle's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem. In addition, during daily use of the vehicle, the warning lights displayed on the vehicle dashboard are divided into two different colors, yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and call for professional assistance to prevent unpredictable dangers to the vehicle and personal safety from forced driving. It should be noted that when the car is started, all lights will turn on, and the system will perform an automatic check. After the check is completed, the lights will turn off automatically. If a light does not turn on when the ignition is switched on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for vehicle inspection to eliminate safety hazards.
8
0
Share

What Causes a Tire to Feel Bulged but Not Visible?

Here is a detailed introduction to the reasons why a tire may feel bulged but not visibly so: 1. Puncture or impact damage: Check if there is any puncture or impact damage on the tread or sidewall corresponding to the bulge. If found, have it repaired at a professional tire repair shop. The principle is that when a cord in the fabric breaks, under the pressure, it gradually pulls out from its original position, causing a sidewall bulge. This phenomenon will become visibly noticeable later, appearing as a radial bulge. 2. Joint of the tire body cords: If there is no damage at the corresponding location and the bulge can only be felt by hand, not visibly obvious when inflated, it is likely the joint of the tire body cords, which does not affect usage. 3. Delamination of components: If the bulge is circular, it should be claimed at the tire dealer or 4S store as it is a quality issue—delamination between rubber components or between rubber components and the tire body cords.
15
2
Share

Is it allowed to stop and drop off passengers by the roadside?

It is allowed to stop and drop off passengers by the roadside. Below are specific details regarding roadside parking: 1. Temporary parking: Temporary parking refers to stopping briefly without leaving the vehicle or for unloading goods or dropping off passengers, then immediately leaving. Temporary parking on the road must not obstruct the passage of other vehicles and pedestrians. Article 63 of the Regulations for the Implementation of the Road Traffic Safety Law specifies that parking is prohibited in areas with no-parking signs or markings, sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, crosswalks, construction zones, intersections, railway crossings, sharp curves, narrow roads, bridges, steep slopes, etc. When temporarily parking by the roadside, vehicles must stay close to the right side of the road, and the driver must not leave the vehicle. If a vehicle is parked or temporarily stopped in violation of regulations, the on-duty traffic police may point out the violation and order the driver to leave immediately. If the driver is not present or refuses to leave immediately, in addition to a fine, the illegally parked vehicle may be towed. 2. Parking: Parking refers to leaving the vehicle unattended. Article 56 of the Road Traffic Safety Law states that motor vehicles should be parked in designated areas, and parking on sidewalks is prohibited.
6
4
Share

What does EC300+ mean?

EC300 is a product under the ENASAVE fuel-saving and environmentally friendly series by Dunlop. The EC300+ utilizes low-rolling-resistance polymer compounds, low-rolling-resistance sidewalls, and a new asymmetric tread pattern, enabling the tire to combine fuel efficiency, environmental friendliness, and wet braking performance while enhancing driving comfort and stability. Here is more detailed information: 1. The EC300+ adopts: a modified polymer material formula that suppresses unnecessary molecular movement from a structural perspective, significantly reducing energy loss in the tread and sidewalls, thereby decreasing heat generation during tire movement. 2. The tread structure consists of: 2 fiber cord layers; 2 steel belt layers; 1 nylon cap layer, with two fiber cord layers in the sidewall. Domestic manufacturing not only enhances price competitiveness but also allows for a better understanding of China's complex road conditions, optimizing adaptability.
10
5
Share

What are the precautions for transferring a car to someone else when selling it?

Here is a detailed introduction to the precautions for transferring a car when selling it: 1. Vehicle Registration Certificate: The vehicle registration certificate is the legal proof of vehicle ownership. Pay special attention to the embossed number, engine number, and registration date on the certificate. If there are signs of alteration on the seller's certificate or if the information does not match the actual details of the used vehicle, the vehicle may have issues. 2. Traffic Violation Records: Check the vehicle's traffic violation records thoroughly. Ensure there are no outstanding violations and verify that the compulsory traffic insurance is still valid. Only vehicles with valid compulsory insurance and no pending violation records can be transferred. 3. Original Vehicle Purchase Tax Payment Receipt: Before proceeding with the transfer process for a used car, always check the original vehicle's purchase tax payment status. Confirming the purchase tax payment status beforehand can help avoid unnecessary expenses.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.