What are the length, width, and height dimensions of the Ford Escort?

1 Answers
MackenzieMarie
07/29/25 7:10pm
The length, width, and height dimensions of the Ford Escort are 4633mm/1825mm/1490mm, which are official data. The length of the Ford Escort refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Ford Escort has a maximum power of 90kW and a maximum torque of 152 N·m. This engine reaches its maximum power at 6500 rpm and its maximum torque at 4500 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 6-speed automatic transmission. The national regulations on vehicle dimensions have specific provisions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
Was this review help?
10
3
Share
More Forum Discussions

Can LED lights pass the vehicle inspection?

LED lights can pass the vehicle inspection. Here are some considerations regarding the installation of LED lights: 1. Whether to install a lens: Before installing LED headlights, first check if the halogen lights have a lens. If there is no lens, there are three solutions: one is to install LED bulbs with a 'built-in cutoff line function' for low beams, which can achieve a lens-like effect, creating a left-low and right-high light pattern to reduce glare for oncoming traffic. The second option is to directly install a lens when fitting LED headlights. The third is to use LED bulbs with good light-focusing performance. The specific choice depends on the vehicle model. 3. Check the original bulb model: Not all LED headlights can be installed in every car because the interface models vary, just like checking whether a household bulb is screw-type or bayonet-type. For example, the bulb model for both high and low beams of the old Lavida is H7, so purchasing LED headlights with an H7 model will suffice.
19
5
Share

Which manufacturer produces the CVT for Baojun?

Baojun's CVT transmission is co-developed through independent research and collaboration with Bosch, with the model code CTF25. The CVT transmission is relatively simple, primarily consisting of a driving pulley, a driven pulley, and a steel belt. Since both pulleys have a conical structure, when they move horizontally, the rolling radius of the steel belt changes accordingly, thereby altering the gear ratio. Here is some information about Baojun: 1: Baojun is an independent automotive brand established by SAIC-GM-Wuling in 2010. Its product lineup includes models such as the 630, 610, 530, and 730, with the 730 being the best-selling model. 2: The Baojun 730 is a family-oriented MPV under the SAIC-GM-Wuling Baojun brand. It features a seven-seat layout with a maximum cargo space of 1680L, making it ideal for family use. The 2+2+3 seating arrangement includes 6-way electric adjustment for the driver's seat and 4-way adjustment for the front passenger seat. The flat floor design enhances convenience for passengers getting in and out of the vehicle. 3: The second row consists of two independently adjustable sliding seats, while the third row features a recessed roof design to ensure headroom comfort. The rear seats support 4/6 split-folding, allowing flexible space adjustments based on usage needs. The middle row includes two independently sliding seats, both equipped with ISOFIX child seat anchors.
20
1
Share

How to Choose Between Touareg 2.0t and 3.0t?

Regarding these two models, it is recommended that users make a choice based on their needs. The introduction of Touareg 2.0t and 3.0t is as follows: 1. Power: The 2.0t engine has parameters of 180 kW and 370 N·m, paired with an 8-speed automatic transmission, achieving a 0-100 km/h time of around 6.8 seconds, providing a very ample acceleration feel. The 3.0TV6 twin-turbocharged engine delivers a maximum horsepower of 340Ps and a maximum torque of 450N·m. 2. Interior: The 2.0t features a highly expansive through-type air vent on the co-driver's side, with a silver trim running below the center console, offering a refined and layered look. The large 15.3-inch screen is tilted towards the driver's side, ensuring ergonomic rationality. The 3.0t overturns Volkswagen's traditional elements such as air vents positioned at the top, air conditioning adjusted via three knobs, and densely packed physical buttons.
15
1
Share

Can electric mopeds carry passengers?

Traffic regulations clearly stipulate that mopeds are not allowed to carry passengers. A moped is a type of motorcycle with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. It must meet various technical standards and legal requirements for motor vehicles, with lower maximum design speed, displacement, or total motor power compared to regular motorcycles. Below are the technical requirements for mopeds according to the "Interim Regulations on the Management of Urban Mopeds and Moped Drivers": 1. The handlebar, frame, and fork must be sturdy and reliable. The handlebar must rotate flexibly without jamming, looseness, or deviation. 2. The headlight, taillight, turn signal, rear license plate light, brake light, rearview mirror, license plate bracket, and speedometer must be fully equipped. The volume and tone of the horn must be appropriate. 3. Brakes must be installed on both front and rear wheels. When driving on dry, flat asphalt or concrete pavement at a speed of 20km/h and using both brakes simultaneously, the wheel skid marks must not exceed a braking distance of 4 meters. 4. Exhaust emissions and noise must not exceed national standards.
18
4
Share

What is the LIM function?

"LIM" is the speed limit function button. Here are the relevant introductions about the LIM function: 1. Activation method: When the vehicle is stationary, pressing this button will default to a speed limit of 30km/h; when pressed while driving, it will set the current speed value as the speed limit trigger point. Press to activate, and press again to deactivate. 2. Specific functions: When the throttle depth is below 95%, the vehicle speed will not exceed the set speed. When the set speed is reached, the vehicle will issue an alert. Fully depressing the throttle can exceed the set speed limit, but the speed limit function remains effective after releasing the throttle. The speed limit function can prevent speeding and is very practical. Unlike cruise control, which maintains speed and allows the driver to rest without needing to press the accelerator pedal for extended periods, the speed limit function only caps the maximum speed of the vehicle, requiring the driver to manually press the accelerator. 3. Setting method: In non-cruise control mode, press the "LIM" button, then press "SET/-" to enter the speed limit adjustment mode. Use "RES/+" to increase the speed limit value or "SET/-" to decrease the speed limit value to achieve the desired setting. The prerequisite for setting is that the vehicle is in non-cruise control mode and traveling at a speed above 30km/h.
4
3
Share

How to Turn Off a Mercedes-Benz?

Here are the steps to turn off a Mercedes-Benz: 1. Press the brake pedal and bring the vehicle to a smooth stop. 2. Shift the gear from D (Drive) to N (Neutral). 3. Engage the parking brake (for electronic parking brakes, simply pull up). 4. Release the foot brake, but do not turn off the power (this ensures the vehicle is completely stationary under the parking brake's effect, preventing P-gear lock-up). 5. Continue pressing the foot brake and shift the gear from N to P (Park). 6. Release the foot brake, press the one-touch start button to power off, completing the shutdown process. Here are some precautions when turning off a car: 1. First, it's advisable to delay shutting off the engine, which benefits the engine. Just like a person needs to walk slowly after a sprint to fully recover, after reaching your destination, avoid turning off the engine and removing the key immediately. You can organize items inside the car and close the windows; the recommended delay time is about 30 seconds. 2. Engines with turbochargers require delayed shutdown. After parking, allow sufficient time for the engine and turbocharger to cool and lubricate before turning off. This protects the engine and aids in cooling the engine and water temperature. In colder weather, you can start the car first to let it warm up on its own.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.