What are the length, width, and height dimensions of the Fit?

1 Answers
StCourtney
07/29/25 6:03pm
The length, width, and height dimensions of the Fit are 4065mm, 1695mm, and 1525mm respectively. The Fit is a hatchback launched by GAC Honda. In terms of power, the Fit is equipped with a 1.5L Earth Dreams engine codenamed L15B2. The 1.5L Earth Dreams engine can deliver 131 horsepower, providing strong power while maintaining a fuel consumption of only 6.1L per 100 kilometers. In terms of configuration, the Fit comes standard with Vehicle Stability Control System, Tire Pressure Monitoring System, Hill Start Assist System, and Emergency Brake Warning System across all models. For the interior, as a mid-cycle facelift model, the 2020 Fit retains the overall design layout of the current model.
Was this review help?
17
3
Share
More Forum Discussions

What are the common transmission faults in the Sagitar?

The common transmission faults in the Sagitar are jerking, impact, and slipping issues. Fault causes: 1. Contamination and blockage: Persistent contamination and impurities inside the transmission, especially when they accumulate in the valve body, can form blockages, preventing effective regulation of oil pressure and leading to jerking, impact, and slipping problems. 2. Overheating: High temperatures can degrade the quality and friction characteristics of automatic transmission fluid, increasing friction and wear, which results in transmission noise. Additionally, sludge (impurities or contaminants) can form inside the transmission (e.g., in the valve body), causing jerking and impact. If the temperature exceeds 120°C, rubber sealing materials begin to harden, eventually leading to leaks and reduced hydraulic pressure. At even higher temperatures, the transmission starts to slip, and slipping further raises the temperature, creating a vicious cycle.
4
4
Share

Can a modified vehicle exempt from inspection still enjoy the exemption if caught?

Modified vehicles exempt from inspection cannot maintain their exemption status if caught. According to current regulations in China, new vehicles enjoy a six-year exemption period from inspection. During this period, motor vehicles are not required to undergo on-site testing but must obtain an exemption decal. However, any traffic violations must be resolved before the annual inspection. Below are relevant details: 1. Situations failing the annual inspection: Vehicles with unresolved traffic violation records cannot pass the annual inspection. The exemption decal can only be obtained after addressing these violations prior to the inspection. 2. Required documents for application: As per regulations, vehicle owners may apply for the inspection compliance decal at the local vehicle management office up to three months before the expiration of the current inspection validity. During the application process, owners must complete an application form and submit the vehicle registration certificate, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and motor vehicle safety technical inspection compliance certificate.
8
0
Share

How to fold the rearview mirror of FAW-Volkswagen T-Roc?

The rearview mirror angle adjustment knob on the driver's door has a rearview mirror folding icon. Simply rotate the adjustment knob to the position of the rearview mirror folding icon. Here is some other information about the T-Roc: 1. The T-Roc is a compact SUV under Volkswagen, equipped with three engines: a 1.2-liter turbocharged engine, a high-power version 1.4-liter turbocharged engine, and a low-power version 1.4-liter turbocharged engine. 2. The 1.2-liter turbocharged engine has a maximum power of 85 kW and a maximum torque of 175 Nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The high-power version 1.4-liter turbocharged engine has a maximum power of 110 kW and a maximum torque of 250 Nm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 4. The low-power version 1.4-liter turbocharged engine has a maximum power of 96 kW and a maximum torque of 225 Nm. It uses an aluminum alloy cylinder head and block and features direct fuel injection technology.
20
4
Share

Where is the Volkswagen Golf keyhole located?

The Volkswagen Golf's hidden keyhole is located on the door handle. Gently push the decorative cover on the door handle to the right to reveal the keyhole. Below is an introduction to the Volkswagen Golf: 1. The Volkswagen Golf is a classic hatchback compact family car launched by Volkswagen in 1974. The vehicle's dimensions are 41999mm in length, 17869mm in width, and 14799mm in height, with a wheelbase of 2578mm. 2. In terms of power, the Volkswagen Golf is equipped with EA211 series 1.6L and 1.4T engines. The 1.6L engine delivers a maximum power of 81 kW and a maximum torque of 155 Nm, paired with a 5-speed manual or 6-speed automatic transmission. The 1.4TSI engine produces a maximum power of 96 kW and a peak torque of 225 Nm, matched with a 5-speed manual or 7-speed dual-clutch transmission.
17
5
Share

Should You Release the Clutch or Brake First When Starting a Car?

When the car is on a flat road, there is no need to press the brake, so there is no question of releasing the clutch or brake first when starting. Simply release the clutch to the semi-engaged position. Below is a partial introduction to the methods of starting a car: 1. Foot Brake Start: While pressing the foot brake, depress the clutch, shift into first gear, and release the clutch to the semi-engaged position. When the body slightly vibrates and the front of the car lifts, release the foot brake, and the car will start moving slowly forward. 2. Hand Brake Start: When starting with the hand brake, there is no need to press the foot brake. This method is used when parked on a slope to stabilize the car by pulling the hand brake. The specific operation is as follows: Hold the steering wheel steadily with the left hand, depress the clutch, shift into first gear, place the right hand on the hand brake, release the clutch to the semi-engaged point, and immediately release the hand brake to allow the car to move forward smoothly.
12
0
Share

Is Braking Required in School Zones for Subject 3?

Braking is required in school zones for Subject 3. Subject 3 includes 7 key braking points (passing straight through intersections, bus stops, crosswalks, school zones, left and right turns, U-turns, and oncoming traffic), which encompass oncoming traffic situations. Below is additional information: 1. Overview: Subject 3, comprising road driving skills test and safety & civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety & civilized driving knowledge test in the motor vehicle driver examination. The content of the road driving skills test varies for different license classes. 2. Test Content: The road driving skills test for Subject 3 generally includes: preparation before starting, simulated lighting test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, passing straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crosswalks, passing through school zones, passing bus stops, encountering oncoming traffic, overtaking, making U-turns, and nighttime driving.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.