What are the length, width, and height dimensions of the BYD Song?

1 Answers
DeFrank
07/29/25 3:23pm
The length, width, and height dimensions of the BYD Song are 4600mm/1830mm/1700mm, which are official data. The length of the BYD Song refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The turbocharged engine of the BYD Song has a maximum power of 118kW and a maximum torque of 245 Nm. This engine reaches its maximum power at 5200 rpm and its maximum torque between 1600 and 4000 rpm. It features direct injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a wet dual-clutch transmission (DCT) or a manual transmission (MT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
Was this review help?
7
3
Share
More Forum Discussions

The brake is called the brake pedal, what is the accelerator called?

The accelerator is called the accelerator pedal or throttle pedal. When the accelerator pedal is pressed, the engine speed increases. The accelerator pedal does not directly control the fuel injection amount but rather the throttle opening. Pressing the accelerator pedal increases the throttle opening, allowing more air to enter the engine, at which point the ECU commands the fuel injection system to inject more fuel. Below is more related information: 1. Accelerator Pedal: The accelerator pedal is a car accessory that allows the driver to control the pedal more freely, enhancing driving safety. Most accelerator pedals are designed with aluminum alloy, and adding an accelerator pedal can significantly increase the vertical contact area of the pedal. 2. General Principles of Throttle Control: Except in emergencies, drivers should remember these eight words in most situations: 'Press lightly, lift slowly, smoothly and evenly.' Stomping on the accelerator not only causes the vehicle to jerk suddenly but also wastes fuel, making passengers inside the car 'rock back and forth' uncomfortably. When pressing the accelerator, the right heel should be placed on the floor of the driver's compartment as a pivot, with the foot lightly pressing on the accelerator pedal. Use the ankle joint's extension and flexion movements to press or release the pedal, applying force gently to achieve a light press and slow lift.
13
5
Share

What's the matter with the fault code indicating excessively high fuel concentration?

Fault codes are related to the gasoline being used. If the detonation value fails to meet the standard, it indicates a long-term issue with poor fuel quality causing the fault code. It may also result from vacuum leaks in the engine intake system, excessive carbon buildup, or contaminated fuel injectors. Additional information: 1. Types of fuel gauges: The fuel gauge on the dashboard typically comes in analog or digital forms, marked with 'F' and 'E' at each end. 'F' indicates a full tank, 'E' means the fuel is empty, and the middle position shows half a tank. When the fuel warning light comes on, it means the gauge is approaching 'E'. 2. Running out of fuel: Generally, when the fuel gauge pointer reaches the red line, there is about 10% fuel left in the tank, allowing an average driving range of 20-60 km, depending on the vehicle model. If you continue driving without refueling beyond the red line, it may cause the fuel pump to burn out.
18
5
Share

Why does the DMV only provide 4 screws?

When a vehicle leaves the factory, there are four installation holes left for the license plate. Therefore, this vehicle must be equipped with four screws. Here are specific details about license plates: 1. Function of license plates: License plates serve as the numbering and information registration for vehicles. Their primary purpose is to identify the region to which the vehicle belongs through the license plate, and also to trace the owner and registration information of the vehicle. 2. Classification by license plate color: Large civilian vehicles have yellow plates with black characters. Small civilian vehicles have blue plates with white characters. Embassy foreign vehicles have black plates with white characters and a red "Embassy" character mark. Consulate foreign vehicles have black plates with white characters and a red "Consulate" character mark. Other foreign vehicles have black plates with white characters. Test vehicles have blue plates with white characters, with the word "Test" before the numbers. Learner vehicles have blue plates with white characters, with the word "Learner" before the numbers. Temporary plates have white backgrounds with red characters, with the word "Temporary" before the numbers. Coach vehicles have yellow plates with black characters, with the word "Learner" after the numbers. Replacement plates for vehicles have white backgrounds with black characters.
15
0
Share

What causes the occasional transmission failure in the 2017 Octavia?

The reasons for the Skoda Octavia's transmission warning light to illuminate are as follows: 1. Sporadic or persistent faults in the automatic transmission's electronic components (sensors, solenoid valves, control unit) can cause the transmission warning light to come on (some models do not have a dedicated transmission warning light, and transmission faults may trigger the engine warning light instead); 2. Mechanical failures in automatic transmission models, such as engine idling, transmission slipping, clutch burnout, or failure to move despite acceleration, can prompt the transmission control unit to activate a fault alert, causing the transmission warning light to illuminate; 3. Overheating of transmission fluid can also trigger the warning light. This may occur due to overfilling the transmission fluid, internal or external blockage of the transmission cooler (common during hot seasons), or high-temperature protection activated due to slippage in the torque converter.
1
5
Share

How to Lock a BMW Car?

Some BMW models feature an automatic door locking function, which can be activated by setting the automatic locking while driving in the iDrive system. Alternatively, you can use the smart key to lock the car after parking. Below is additional information about the BMW 3 Series: 1. Exterior Configuration: The long-wheelbase models come standard with features such as a panoramic sunroof and LED headlight clusters (including adaptive headlight function). The launch edition offers a Luxury Design Package, while the other three configurations provide M Sport Package, M Aerodynamics Kit, etc. 2. Interior: The new BMW 3 Series long-wheelbase version largely retains the design of the overseas model. For example, it features a new floating LCD screen, a redesigned electronic gear lever, and an M-branded three-spoke multifunction steering wheel. In terms of power, the new BMW 3 Series long-wheelbase version is equipped with the latest B-series 2.0T engine (B48B20B type), delivering the same 184 horsepower as the current 320i/Li models.
18
2
Share

Why does the Porsche reversing camera suddenly stop displaying?

There are several reasons why the Porsche reversing camera may suddenly stop displaying: 1. Camera damage or obstruction: If the camera is damaged, the image cannot be transmitted to the computer, resulting in no display. In this case, you should take the car to a repair shop or 4S store for maintenance, and if necessary, replace the camera. If the camera is simply blocked by debris, removing the obstruction should resolve the issue. 2. Display screen damage: If the display screen remains black and fails to start or shows distorted images, it is generally a sign of damage. This situation requires inspection and repair at a repair shop or 4S store. 3. Poor electrical connection: Frequently driving on rough roads can cause the internal wiring of the vehicle to become loose or disconnected due to the bumpy environment. When the wiring has poor contact, the image from the camera cannot be transmitted to the main unit, and the reversing camera will not display. This situation requires disassembling the center console panel for inspection.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.