What are the length, width, and height dimensions of the Baojun 730?

What does 'check' mean on a car display?

The 'check' light in a car is the engine indicator light, which is used to display the working condition of the engine. This indicator light shows the operational status of the engine. When you turn the ignition key, the light will illuminate during the vehicle's self-check and then turn off automatically. If it remains lit, it indicates that there is a fault with the engine, requiring inspection and repair. Below are descriptions of various lights on the car dashboard: 1. Door status indicator. This light shows whether the doors are fully closed. If a door is open or not properly closed, the corresponding light will illuminate to alert the driver. It turns off once the door is closed. 2. Parking indicator. This light comes on when the parking brake (handbrake) is engaged. It turns off automatically when the handbrake is released. In some models, this light may also indicate low brake fluid. 3. Battery indicator. This light displays the working status of the battery. It lights up when the ignition is turned on and turns off after the engine starts. If it doesn’t light up or stays on continuously, the generator and circuit should be checked immediately. 4. Fuel indicator. This light warns of low fuel. When it illuminates, it means the fuel is nearly depleted. Typically, the vehicle can still travel about 50 kilometers after this light comes on before running out of fuel.

17

3

Share

Why is the Vehicle Stability Control System Light On?

The illumination of the Vehicle Stability Control System light is primarily caused by a malfunction in the vehicle's electronic stability control system. In such cases, it is recommended to visit a 4S dealership to use a professional diagnostic scanner to read the fault codes, followed by repairs based on the identified codes. The Vehicle Stability System, also known as the ESP system, mainly consists of three components: sensors, actuators, and the electronic control unit. Below is an introduction to the related content: 1. The sensors mainly include wheel speed sensors, steering angle sensors, lateral acceleration sensors, yaw rate sensors, and brake master cylinder pressure sensors. The actuators primarily consist of traditional braking systems and hydraulic modulators. The electronic control unit works in conjunction with the engine management system, allowing for intervention and adjustment of the engine's power output. 2. The Vehicle Stability System is an active safety feature in automobiles that significantly enhances vehicle handling and safety. During sharp turns or sudden acceleration, the vehicle's sensors can quickly detect these conditions and take appropriate measures to control the tires accordingly while reducing engine power output to ensure vehicle stability. 3. The Vehicle Stability Control System also includes ABS and ASR. ABS prevents wheel lock-up during braking, and ASR prevents wheel spin during acceleration.

19

1

Share

What to Do When the Steering Wheel Shakes After Changing Tires?

The solution to steering wheel shaking after changing tires: perform dynamic balancing. More information about dynamic balancing is as follows: 1. The most widely used balancing methods are process balancing and on-site machine dynamic balancing. As an important branch of on-site machine dynamic balancing technology, online dynamic balancing technology is also in a period of vigorous development and shows great promise. 2. Dynamic balancing can not only eliminate the dynamic unbalance couple but also the centrifugal force caused by static unbalance. 3. Any method that can only determine the position of the rotor's unbalanced weight and the location and size of the balance weight to be added while the rotor is in motion is called dynamic balancing.

4

3

Share

What Does It Mean When the EPC Warning Light Comes On?

When the EPC warning light illuminates in a vehicle, it indicates the following: 1. A steady EPC light typically signifies a fault in the engine management system or electronic control, often accompanied by symptoms like unstable idle speed or engine shaking during cold starts. For most Chinese car owners, this is usually caused by poor fuel quality or a dirty operating environment. It's recommended to drive to a service station for inspection as soon as possible. In most cases, cleaning the throttle body can resolve the issue. 2. The EPC indicator lights up during the functional check when the ignition is turned on. If this light comes on while driving, it indicates a malfunction in the engine's electronic power control system, requiring immediate engine inspection. Common causes include a dirty throttle valve body, vacuum leaks in the intake system, faulty brake switches, or overdue engine software upgrades. 3. There are two other possible reasons for EPC illumination. One is a dirty throttle body that needs cleaning; the other is non-functioning brake lights, which can be fixed by replacing bulbs or checking the brake switch and wiring.

20

5

Share

What is the normal range for coolant temperature?

Coolant temperature between 75-98 degrees Celsius is considered the normal range. Here are the detailed explanations: 1. When the engine is cold and just started, the coolant temperature is the same as the ambient temperature. 2. After 3-5 minutes of engine warm-up operation, the coolant temperature will gradually rise and enter the working temperature range of 75-98 degrees Celsius. 3. The specific working temperature range may vary depending on the vehicle model or driving style. For example, high-performance engines or engines in sport driving mode may operate at slightly higher temperatures. 4. If the coolant temperature exceeds the engine's normal operating temperature, the engine coolant temperature warning light will illuminate on the dashboard. Common causes of overheating include insufficient or deteriorated antifreeze, damaged thermostat, faulty coolant temperature sensor, clogged radiator, or malfunctioning cooling fan.

6

1

Share

What is the fuel consumption per 100 kilometers for a 1.6L engine?

The fuel consumption per 100 kilometers for a 1.6L engine is generally around 6-8 liters, depending on individual driving habits. More information about fuel consumption per 100 kilometers is as follows: 1. Fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle traveling at a certain speed for 100 kilometers on the road, which is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to determine the theoretical experimental fuel consumption data per 100 kilometers for the model. 2. The slower the vehicle travels within the economic speed range, the higher the fuel consumption per 100 kilometers, and the opposite is true when exceeding the economic speed.

17

5

Share

What are the length, width, and height dimensions of the Baojun 730?

What does 'check' mean on a car display?

Why is the Vehicle Stability Control System Light On?

What to Do When the Steering Wheel Shakes After Changing Tires?

What Does It Mean When the EPC Warning Light Comes On?

What is the normal range for coolant temperature?

What is the fuel consumption per 100 kilometers for a 1.6L engine?

Does Car Privacy Glass Need Tinting?

Which Gear Should Be Engaged for Reversing?

What Happens When the Clutch Switch Fails?

How to Repair Car Tires?