···
Log in / Register

What are the length and width of the Mazda CX4?

3 Answers
JulianaRose
07/30/25 2:16am
Mazda CX4 body dimensions are 4637mm in length, 1855mm in width, 1524mm in height, with a wheelbase of 2700mm. Here is more information about the Mazda CX4: 1. The Mazda CX-4 is positioned as a compact coupe SUV, officially debuted at the April 2016 Beijing Auto Show. This is a China-specific model released by Mazda. 2. The Mazda CX-4 features front and rear tires with a specification of 225/55-R19, a dual-tone interior design, a symmetrical dashboard made of soft materials, paired with a floating central control screen. It is equipped with a 2.5L-L4 engine, with a maximum engine power of 192 horsepower.
Was this review help?
16
1
Share
LeLillian
08/15/25 8:20am
After driving the Mazda CX-4 for two years, I've noticed its body length is approximately 4.63 meters and width 1.84 meters, which is a medium size among compact SUVs. The length isn't too long, making city parking quite convenient—unlike larger vehicles that always require big parking spots. The width is moderate, offering agile handling during turns and stability on highways without feeling shaky. With a wheelbase of 2.7 meters, the rear seats provide ample space for family trips, allowing children to stretch their legs, and the trunk can fit three to four suitcases comfortably. The car's streamlined design complements these dimensions, giving it a sporty appearance while maintaining good fuel efficiency—a full tank can cover over 500 kilometers, making daily commutes hassle-free. If you prioritize parking convenience and practical space, I think these dimensions strike a perfect balance.
Was this review help?
10
4
Share
Expand All
Rachel
10/21/25 5:16am
As a young car owner, I particularly appreciate the dimensions of the Mazda CX-4. Its length of 4.63 meters and width of 1.84 meters are just perfect for me. The body length keeps it from feeling bulky, while the added width enhances its stance, making it incredibly agile in corners with strong grip when racing with friends. The interior space is cleverly utilized, with a 2.7-meter wheelbase that ensures ample room for two passengers in the back without feeling cramped, and the seats can be folded down to fit a bicycle. The overall streamlined design paired with the red paint creates a striking visual impact, making it a real head-turner on the street. The height of 1.53 meters is just right—easy to navigate in and out of garages without significantly affecting aerodynamics, and the fuel consumption is around 8 liters per 100 km, which is quite economical. These dimensions perfectly blend sportiness with practicality, delivering a full-score driving experience.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

How Many Times Can a Clutch Be Burned Out?

Clutch plates need to be replaced once they are burned out. If the clutch is kept in a semi-engaged state for an extended period with high engine RPM, it will cause more wear and tear, accompanied by issues such as shaking, slipping, and unusual noises, necessitating replacement. Reasons for clutch plate burn-out: prolonged usage or excessive mileage; natural aging of the clutch plate, substandard material quality; overheating due to high working temperatures; wear caused by insufficient lubrication; too small free travel or excessive load cycles. Symptoms of a burned-out clutch: Reduced power: The engine's power output is transmitted to the transmission via the clutch. When the clutch is burned out, the clutch plates slip, naturally leading to reduced power. Metal grinding noise: The friction surface of the clutch plate is secured with rivets. Burning the clutch will wear out the friction surface, causing the rivets to come into contact with the flywheel, resulting in a metal grinding noise when engaging or disengaging the clutch. Changed clutch pedal travel: Burning the clutch thins or eliminates the friction surface, altering the clutch pedal's travel. Gear shift jerking: The clutch plate contacts the flywheel. When the clutch is burned out and rivets are exposed, it leads to a strong jerking sensation during gear shifts.
4
2
Share

What Are the Causes of Incomplete Clutch Disengagement?

Clutch disengagement issues: Excessive free travel of the clutch pedal, bent or deformed release levers, oil leakage in the clutch hydraulic control mechanism. Excessive free travel of the clutch pedal: When the free travel is too large, the movement of the release bearing pushing the release lever forward is reduced, consequently shortening the rearward movement of the pressure plate, leading to incomplete clutch disengagement. Solution: Inspect the free travel of the clutch pedal and adjust it if excessive. Bent or deformed release levers: Bent or deformed release levers, loose supports, worn-through pivot pin holes, dislodged pivot pins, or uneven contact surfaces between the release levers and the release bearing. Solution: Immediately seek professional repair services to inspect and replace the release levers as needed. Oil leakage in the clutch hydraulic control mechanism: Leakage, air presence, or insufficient oil in the hydraulic control mechanism. Symptoms include difficulty in shifting gears even when the clutch pedal is fully depressed, or the vehicle moving forward without releasing the pedal, causing the engine to stall. This indicates incomplete clutch disengagement. Solution: For hydraulic control mechanisms, check if the fluid reservoir has insufficient oil or if there is air in the lines, and perform necessary purging.
1
0
Share

Do I Need to Press the Brake When Shifting Gears During Reverse Parking?

It is best to keep the brake pressed at all times. If you can ensure that the test vehicle does not roll in the garage, you may not need to press the brake. When shifting gears, the vehicle is required to be in a stopped state. If the vehicle rolls, it may be judged as a failure. Below are specific tips for reverse parking: 1. Identify the starting point: Take right reverse parking as an example. The distance between the car and the left line at the starting position should be 1.2-1.8 meters, the steering wheel should be straight, and the body should be parallel to the left line. When reversing, use the bottom edge of the left rearview mirror as a reference. When the two coincide, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Look at the right rearview mirror. When you spot the garage corner point, pay attention to the changing distance between the corner point and the car body. When the distance is less than 30 cm, turn the steering wheel back halfway and continue reversing. Once the car body enters the garage and is parallel to the garage line, turn the steering wheel back one full turn. If the distance is not less than 30 cm, do not turn the steering wheel back. Keep reversing until the car body is parallel to the garage line, then turn the steering wheel back one and a half turns at once. 3. Align the stopping point: The stopping point is the parking spot after entering the garage. The reference method is the same as for the starting point. When you see the bottom edge of the left mirror coincide with the garage's shoulder line, stop the car.
4
2
Share

Where is the rearview mirror heating switch on the 10th-generation Civic?

Three curved upward arrows paired with a rectangle represent the rearview mirror heating button icon. 1. Vehicle model restrictions: Although rearview mirror heating is practical, it is restricted on some models. For example, the rearview mirror heating function only operates when the ambient temperature is below 15 degrees Celsius. 2. Power consumption: Note that rearview mirror heating consumes a significant amount of power. Therefore, when using the rearview mirror heating function, ensure the vehicle is in the running state and avoid using this function when the engine is cold. If the battery is low on charge or malfunctioning, the rearview mirror heating may not activate.
18
4
Share

What Level of Officials Are Eligible for the Hongqi L5?

Hongqi L5 is primarily designated for officials at the level of the President of the country, serving as a dedicated vehicle for receiving foreign guests. Below is a detailed introduction about the Hongqi L5: 1. Overview: The Hongqi L5 is a Class E sedan with 100% independent intellectual property rights, developed and prepared for production by FAW (China First Automobile Works) after the success of the Hongqi-branded parade vehicle project in 2009. 2. Other Features: The design of the Hongqi L5 continues the classic styling of the Hongqi CA770, incorporating many traditional elements. The front face of the Hongqi L5 is inspired by the CA7600J parade vehicle from the 2009 National Day celebration, featuring a dignified and elegant appearance. The round headlights and the streamlined front-mounted Hongqi emblem are iconic design elements of the Hongqi brand.
18
3
Share

What Happens When Rear Wheels Lock Up?

When the rear wheels lock up during braking, it may cause the vehicle to skid or fishtail, while front wheel lock-up can result in a loss of steering control. During driving, wheel lock-up may occur due to braking, where the braking torque causes the wheels to stop rotating and slide on the road surface—essentially, the tires stop turning, and the car slides like a brick on the road. Wheel lock-up results in pure sliding friction between the tires and the road. Front wheel lock-up leads to steering failure, preventing the vehicle from moving in the intended direction and instead causing it to drift toward the path of least resistance. Rear wheel lock-up, on the other hand, can induce what is commonly known as drifting. Since locked wheels lose the ability to resist lateral forces, the vehicle may experience skidding or loss of control. When wheels lock up, the driver should release the brake pedal. Vehicles equipped with an ABS (Anti-lock Braking System) can effectively prevent this situation. Tire lock-up refers to the sudden and complete stopping of the wheels when braking, causing the vehicle to lose steering capability. This typically occurs in vehicles without ABS. Wheel lock-up happens due to excessive braking force from the brake pads, discs, or drums. However, because of the vehicle's momentum, it continues moving forward with the tires sliding rather than rolling, making it impossible to change direction and potentially leading to accidents.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.