What are the latest regulations on truck traffic restrictions in Guangzhou in 2020?

What is the ground clearance of the Honda Lingpai in centimeters?

The ground clearance of the Honda Lingpai is 14.4 cm when fully loaded and 16.5 cm when unloaded. The Lingpai features a front MacPherson independent suspension and a rear torsion beam semi-independent suspension combination. Its structural layout is similar to that of the Honda City, with a plastic-covered floor pan and well-executed oil line maintenance. Below are more details about the Honda Lingpai: 1. The front MacPherson suspension structure uses a forged steel lower control arm and a cast iron bearing housing, arranged compactly. The body is reinforced with strengthening components, and the front suspension subframe is an H-shaped steel subframe, with an iron engine underguard for protection. The front suspension lower control arm connects to the subframe via hydraulic bushings and to the bearing housing via rubber bushings. This non-bolt rigid connection method enhances ride comfort. 2. The rear suspension is a torsion beam semi-independent suspension, with both the torsion bar and spring base made of forged steel. The Lingpai's rear suspension lacks a subframe; the torsion bar connects to the body via rubber bushings, which help filter road vibrations compared to rigid bolt connections. The front wheel arches are protected by plastic panels and coatings, with the plastic panels reducing noise from gravel and the coatings providing waterproofing and rust prevention.

1

2

Share

Will Water Enter the Engine When Washing the Car?

Water will not enter the engine when washing the car. Here are the relevant reasons: 1. The car's exhaust pipe is very long, almost as long as the car body. From the engine exhaust valve to the exhaust outlet, there is a three-way catalytic converter and two mufflers in between, both of which have winding pipes inside, making it difficult for water to pass through. Additionally, the height of the engine exhaust valve is much higher than that of the exhaust outlet. As long as the water level does not exceed the exhaust valve, water will not enter. Moreover, when the engine is running, the pressure inside the exhaust pipe is very high, and any water deposited inside will be blown out under this pressure. 2. Generally, as long as the car is not completely submerged in water, water will not enter the engine through the exhaust pipe. Even if the car drives through water during the rainy season and the exhaust pipe is fully submerged, water will not enter the engine.

2

5

Share

Which Direction Should the Ceramic Tube of Xenon Headlights Face?

When installing the ceramic tube of xenon headlights, it should face directly downward. Here is more information about xenon headlights: 1. Xenon headlights are high-pressure gas discharge lamps filled with a mixture of inert gases, including xenon, and do not have the filament found in halogen lamps. They are also known as HID (High-Intensity Discharge) xenon headlights or metal halide lamps and are categorized into automotive xenon headlights and outdoor lighting xenon headlights. 2. In the automotive lighting field, xenon headlights are also referred to as HID gas discharge headlights. They replace traditional tungsten filaments with high-pressure xenon gas enclosed in quartz tubes, providing higher color temperature and more focused illumination. Xenon lamps generate an arc of light by activating xenon gas with high-voltage current, which continuously discharges and emits light between two electrodes. While standard automotive tungsten filament bulbs require 55 watts, xenon lamps only need 35 watts, reducing power consumption by nearly half. This significantly alleviates the load on the vehicle's electrical system. 3. The color temperature of automotive xenon headlights ranges between 4000K and 6000K, which is much higher than that of conventional headlight bulbs. They offer high brightness; for example, a 4300K xenon headlight emits a white light with a slight yellow tint. Due to the lower color temperature, the light appears more yellow, but it has superior penetration compared to higher color temperature lights, enhancing driving safety during nighttime and foggy conditions.

7

5

Share

How to Prevent Rainwater on Car Rearview Mirrors?

There are several main methods to prevent rainwater on car rearview mirrors: 1. Before driving in the rain, evenly apply soap on the rearview mirrors. After the soap hardens, wipe it off with a towel. This will form a wax layer on the glass surface, which has excellent water-repellent properties. 2. Use a water repellent: Spray or apply the water repellent evenly on the rearview mirrors. The repellent will form a protective film on the surface of the mirrors, which also has good hydrophobic properties, effectively preventing fogging and ensuring clear visibility. 3. Install rain guards on the rearview mirrors: These can block rainwater and prevent it from dripping onto the mirror surface. However, rain guards cannot solve the problem of fogging on the rearview mirrors.

19

4

Share

What engine does the Lynk & Co 01 New Energy use?

The Lynk & Co 01 New Energy model is equipped with the Drive-E series VEP4 2.0TD engine. Here are the relevant details: 1. This engine has a displacement of 2.0L and adopts an inline four-cylinder structure. It follows a modular design concept and is equipped with different turbocharging configurations. 2. The engine used in the Lynk & Co 01 achieves maximum torque at just 1400 rpm, with a maximum power output of 140kW and peak torque of 300Nm. 3. The 2.0TD engine in the Lynk & Co 01 shares fundamental parameters with Volvo's T4 engine, but it has undergone special tuning for different vehicle models, ensuring optimal compatibility across various configurations. 4. The significance of the Drive-E powertrain lies in its breakthrough in cylinder count constraints while maintaining engine performance. Despite its smaller displacement, this engine delivers higher efficiency and lower emissions, achieving an ideal balance between power and environmental friendliness. 5. Thanks to its centrally positioned fuel injector design, this engine enables more thorough fuel-air mixing, improving fuel efficiency and reducing vehicle fuel consumption.

13

1

Share

What Does It Mean When Water Enters the Engine?

When driving in rainy weather or on flooded roads, water may sometimes enter the vehicle's engine, causing malfunctions. Below is an explanation of how water enters the engine: 1. If water enters the engine through the exhaust pipe, it must pass through the muffler, mid-pipe, and catalytic converter to reach the engine. The interior of the muffler and catalytic converter consists of complex mesh structures, combined with the curved exhaust pipe, making it nearly impossible for water to pass through. In reality, the main cause of engine stalling due to water ingress is not the exhaust system but the intake system. 2. When rainwater bypasses the air intake, it can wet the air filter or even flow into the intake manifold, eventually reaching the cylinders. Generally, if the air filter gets soaked by rainwater, the intake will be blocked, causing the engine to stall. However, if an attempt is made to restart the engine, the movement of the pistons can draw rainwater from the intake into the cylinders.

17

2

Share

What are the latest regulations on truck traffic restrictions in Guangzhou in 2020?

What is the ground clearance of the Honda Lingpai in centimeters?

Will Water Enter the Engine When Washing the Car?

Which Direction Should the Ceramic Tube of Xenon Headlights Face?

How to Prevent Rainwater on Car Rearview Mirrors?

What engine does the Lynk & Co 01 New Energy use?

What Does It Mean When Water Enters the Engine?

Can a Car Refrigerator Be Used at Home?

Can You Still Drive If the Car's Water Temperature Gauge Stops Moving?

How to Save Fuel When Driving an Automatic Car?

Can You Still Drive After Adding Coolant to Engine Oil?