What are the latest regulations on the restricted hours for non-local vehicles in Shenzhen in 2020?

2 Answers
MacJames
07/25/25 3:30am
2020 Shenzhen non-local vehicle restricted hours: 7:00-9:00 and 17:30-19:30 on weekdays. There are no restrictions during Shenzhen's epidemic prevention period. For non-Shenzhen licensed passenger vehicles, the first two violations of the restricted area regulations in this notice will not be penalized, and fines will be imposed starting from the third violation. The following roads are not subject to restrictions: 1. Shenzhen expressways: S3 Guangzhou-Shenzhen Riverside Expressway, G4 Guangzhou-Shenzhen Expressway, G15 Jihua Expressway, S33 Nanguang Expressway, S31 Longda Expressway, G94 Meiguan Expressway, S29 Qingping Expressway, G4E Yanpai Expressway, S28 Shuiguan Expressway, G4E Boshen Expressway, S30 Huishen Coastal Expressway, G15 Shenshan Expressway, G25 Changshen Expressway; 2. Shenzhen Bay Port: S3 Guangzhou-Shenzhen Riverside Expressway, Dongbin Tunnel, Dongbin Road, Shahe West Road; 3. Huanggang Port: G4 Guangzhou-Shenzhen Expressway, Huanggang Road, Baihe Road, Tongqing Road, Futian South Road; 4. Futian Port: G4 Guangzhou-Shenzhen Expressway, Guihua Road, Guohua Road, Yuheng Road.
Was this review help?
6
0
Share
EvelynLee
08/10/25 5:01pm
Having lived in Shenzhen for many years and commuting by car daily, I'm very familiar with the 2020 restrictions on non-local vehicles. From Monday to Friday, non-local license plates are prohibited during specified hours, with two peak restriction periods each day: 7:00-9:00 AM and 5:30-7:30 PM. The restricted areas cover most urban roads in the city, including Luohu and Futian central districts, but exclude highways and suburban areas. There are no restrictions on weekends or public holidays, making it convenient for leisure travel. As a regular driver, I know the risks of violating these rules—a 200 RMB fine per violation plus penalty points. It's best to book passage in advance via the Shenzhen Traffic Police app or avoid peak hours. Last year, I tried leaving early to avoid congestion and found it saved time while reducing parking hassles. Always check the calendar to avoid mistaking workdays.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

How to reset the maintenance reminder for the 2016 Focus?

First, press the vehicle's one-touch start button to start the engine. Then, continuously press the SET button on the left side of the multifunction steering wheel until you hear a beep. Next, press the OK button on the right side of the multifunction steering wheel. This will cancel the maintenance light reminder. Related details are as follows: 1. Exterior: The Focus adopts Ford's family-style design, featuring a "Martin" front grille paired with a hexagonal chrome-plated front grille and sharp headlights on both sides. Although the newer Focus models are more dynamic, the classic version still looks very stylish. On the side, multiple parallel waistlines extend, highlighting the Focus's unique character. At the rear, the iconic taillight assembly, combined with a multi-layered design, constantly exudes a sporty vibe. 2. Configuration: The Focus comes standard with practical and thoughtful features such as front/rear center armrests, rear cup holders, hill-start assist, a multifunction steering wheel, automatic headlights, power-adjustable mirrors, heated exterior mirrors, and engine start-stop. Additionally, users can opt for tech features like wireless phone charging, automatic parking, and the ACC full-speed intelligent adaptive cruise control system based on actual needs.
11
0
Share

What is the fuel consumption per 100 kilometers of the Jetta VS5?

The fuel consumption per 100 kilometers of the Jetta VS5 is 6.2-6.8L. Currently, there are 5 models available for sale. Among them, the Jetta VS5-2022 manual Yuexiang Pro and manual Jinqu Pro both have a fuel consumption of 6.2L per 100 kilometers, while the automatic Yuexiang Pro, automatic Jinqu Pro, and automatic Rongyao Pro have a fuel consumption of 6.8L per 100 kilometers. The above figures are the NEDC combined fuel consumption, which are the data measured under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than this value, at 7.1L/100km. Among comparable models, the Changan CS75-2022 has a combined fuel consumption of 6.2L/100km, the Haval Chulian 2021 has a combined fuel consumption of 6.5L/100km, and the Trumpchi GS3-2021 has a combined fuel consumption of 5.9L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind direction, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger engine displacements consume more fuel than those with smaller displacements because larger displacements generally mean higher power, requiring more gasoline to burn and perform work. Cars with greater weight will also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind direction: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is less likely to atomize during a cold start, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
9
4
Share

Does a Car Consume Fuel at Idle?

Yes, a car consumes fuel at idle. Based on the current average vehicle displacement of 1.5-1.8 liters, the fuel consumption at idle is approximately 1-2 liters per hour. Additionally, if the air conditioning is turned on during summer, the fuel consumption at idle will be even higher. The harms of car idling are as follows: 1. Increased engine carbon deposits. 2. Shortened engine lifespan. 3. Overly rich air-fuel mixture in the engine, which can easily damage the catalytic converter. 4. Loosening of the vehicle's braking system, increasing the risk of accidents. 5. Increased exhaust emissions from the vehicle's cylinders.
13
1
Share

How many kilometers should a car generally go before changing the oil?

Under normal circumstances, the oil change interval is between 5,000-10,000 kilometers or every six months to a year. The following is an introduction to the functions of engine oil: 1. Lubrication: Engine oil forms a lubricating film between the piston and cylinder, thereby reducing friction. 2. Sealing: The oil film formed by engine oil can prevent gas and oil leakage. 3. Cleaning: Engine oil can circulate and carry carbon deposits, sludge, and wear particles from engine components back to the oil pan. 4. Rust and corrosion prevention: The oil film on the surface of components prevents contact with moisture and air, achieving rust and corrosion prevention.
1
0
Share

What causes engine shaking during startup?

Engine shaking during startup is generally caused by severe engine carbon deposits, issues with the ignition system, unstable oil pressure, aging engine components, or excessive carbon buildup. The most common reasons for car shaking are a dirty throttle body or excessive carbon deposits in the fuel injectors. Below are relevant details: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold-start fuel injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the cylinders by the engine's vacuum suction and burned, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes idle shaking after a cold start. The lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits significantly affects whether the cold start proceeds smoothly. 1. Abnormal coolant temperature: The engine operates within a specific temperature range. If the coolant temperature is too high, it can lead to premature ignition timing, changes in the air-fuel ratio, thinning of the engine oil, and reduced lubrication performance. Common causes of shaking include low coolant levels, a stuck thermostat, a non-functioning fan, or an inaccurate temperature control switch. Resolving these issues will eliminate the shaking. 2. Clogged fuel injectors: The fuel injectors in electronic fuel injection vehicles are critical components for fuel delivery and have a long lifespan, often lasting hundreds of thousands of kilometers. However, the presence of gums in gasoline can clog the injector nozzles, causing uneven fuel delivery among the injectors. This results in inconsistent cylinder performance and engine shaking. The solution is to remove and clean the injectors. 3. Low cylinder pressure: Engines come in 3-cylinder, 4-cylinder, 5-cylinder, 6-cylinder, and 8-cylinder configurations. If one cylinder is not functioning properly, it can lead to a misfire and engine shaking. This is most noticeable in 3-cylinder engines, followed by 4-cylinder engines. A cylinder compression test can be performed using a compression gauge to check cylinder pressure.
14
3
Share

What engine is used in the Changan Oushang X5?

Changan Oushang X5 uses two types of engines, one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter naturally aspirated engine. The specific details are as follows: 1. The Changan Oushang X5 is a compact SUV under the Changan brand. The dimensions of this car are 4490 mm in length, 1860 mm in width, 1580 mm in height, with a wheelbase of 2710 mm. 2. The 1.6-liter naturally aspirated engine of the Changan Oushang X5 delivers 128 horsepower and a maximum torque of 161 Nm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The use of aluminum alloy reduces the weight of the engine, thereby improving the car's handling and fuel economy. This engine is paired with either a 5-speed manual transmission or a CVT. 3. The 1.5-liter turbocharged engine delivers 180 horsepower and a maximum torque of 300 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1250 to 3500 rpm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block to reduce weight. This engine is paired with a 7-speed dual-clutch transmission.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.