What are the L gears in an automatic transmission?

1 Answers
AliviaMarie
07/29/25 3:49pm
L--Low, low gear. When going downhill or on long slopes, shifting to this gear restricts the car to the lowest gear (equivalent to first gear in a manual transmission), allowing the engine to assist in braking. This prevents the brake pads from overheating due to prolonged braking, reducing the risk of danger. Below is an introduction to the various gears in an automatic transmission: 1. P--Parking, parking gear. 2. R--Reverse gear, used for reversing. 3. N--Neutral, neutral gear. 4. D--Drive, the forward gear. 5. 2--Low gear. 6. L--Low, low gear. 7. OD----Overdrive gear, used for high-speed driving to achieve fuel efficiency.
Was this review help?
11
0
Share
More Forum Discussions

How Long Does It Take to Learn Car Wrap and Color Change?

Learning car wrap and color change takes about 3 months. For those learning car wrap and color change, a study period of around three months is already considered quite skilled. Things to Note When Applying Wraps: When applying wraps, it is essential to choose high-quality wraps and have them installed by professional shops. Inferior wraps may not meet light transmittance standards, which can affect the driver's visibility during night driving. It is not recommended to apply wraps on the front windshield, as this may impair the driver's view. When applying wraps to the side windows of the driver and front passenger seats, two sections should be cut out to ensure the driver has a clear view of the side mirrors. After applying the wrap, avoid rolling the windows up and down, as this may cause the wrap to peel off. Lifespan of Car Wraps: Generally, car wraps can last for about three years. After removing the wrap, there may be a lot of adhesive residue left on the windows. Before attempting to remove this adhesive, it is important to soften it first to facilitate removal. If the adhesive is not softened and scraped off directly, it may leave scratches on the glass. After softening the adhesive with alcohol or essential balm, use a plastic pry tool to scrape it off—avoid using hard metal objects for scraping.
11
1
Share

How to Use the Cigarette Lighter in an Audi Car?

The cigarette lighter in the Audi A6L is located between the two cup holders on the right side of the gear lever. Simply press down the handle of the lighter to start heating, and it will automatically pop out when finished. The cigarette lighter in the Audi A4L is positioned above the two cup holders. Insert the lighter into the socket and press the handle to start heating immediately. Here is some additional information: 1. Cigarette Lighter: The cigarette lighter is primarily used in places where open flames are prohibited, such as factories and workshops, where lighting a cigarette requires the use of a cigarette lighter. Additionally, besides serving as a lighter, the car cigarette lighter can also be equipped with a car inverter, which converts the car's 12V, 24V, or 48V DC power into 220V/50Hz AC power for use with ordinary electrical appliances. It is recommended to use a split-type car inverter, with the power of the electrical appliance limited to below 150W, ensuring the output current does not exceed the battery's current. 2. Cigarette Lighter Socket: A cigarette lighter socket is an electronic device similar to a multi-socket power outlet used in households. It connects to the car's power supply via a plug and provides multiple cigarette lighter ports. The cigarette lighter socket is very useful for car owners who frequently use car electronics.
14
2
Share

What are the body dimensions of the Binyue?

The body dimensions of the Binyue are length 4330mm, width 1800mm, and height 1609mm, as per official data. The length of the Binyue refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The Binyue is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 141PS, a maximum torque of 235Nm, and a maximum power of 104kW, paired with a 6-speed manual transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
15
3
Share

How to Clean the Sunroof Drain Pipe of the Envision?

To clean the sunroof drain holes, you can directly use a high-pressure air gun to blow them out, which effectively removes dirt from the sunroof drain holes. Cars equipped with sunroofs have drain holes. If there are no drain holes or if they are blocked, the sunroof may leak during rain. There are several types of car sunroofs: 1. Built-in Sunroof: A built-in sunroof refers to a sunroof where the sliding assembly is located between the interior and the roof. Its advantages include a large opening and a sleek, aesthetically pleasing appearance. Most sedans use built-in sunroofs. 2. Pop-up Sunroof: Pop-up sunroofs are compact and have a simple structure. Installed on the roof, they effectively promote air circulation inside the car, allowing fresh air to enter and providing a healthy and comfortable experience for the owner. Additionally, car sunroofs can broaden the field of vision and are often used for mobile photography and videography needs. 3. Panoramic Sunroof: Panoramic sunroofs offer the advantages of an expansive view and excellent ventilation. However, they also have some drawbacks, such as higher costs, the need to clean accumulated dust to avoid obstructing the view, and a reduction in the overall rigidity of the car body, which lowers the safety coefficient.
15
2
Share

What causes the fuel gauge to show less than full when the tank is actually full?

Reasons why the fuel gauge shows less than full when the tank is actually full: 1. There may be an issue with the fuel level sensor, usually caused by poor contact. Check whether the fuel float can send normal signals. Remove it and move the float to the highest position to see if the fuel gauge indicates full. Determine whether the fault lies with the gauge or the float and replace accordingly. 2. The fuel gauge may be inaccurate. Check if the instrument circuit has been modified. Visit a 4S shop to verify whether the gauge pointer can reach the maximum line and if the indication is accurate. 3. The fuel gauge pointer may be stuck, in which case the entire instrument must be replaced. Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through fractionation, cracking, or pyrolysis, and it is used as fuel.
10
4
Share

What Causes Water in the Engine Cylinder?

Reasons for water entering the engine cylinder: Water entering through the air filter: If the engine only has a mixture of water vapor entering through the air filter, the issue is minor and can be resolved with simple treatment. Small amounts of water in the oil or fuel: There may be small amounts of water in the oil or fuel, requiring an oil change and cleaning of related engine components. Minimal water in the engine: If there is more water but not a significant mixture, and the car hasn't been started, the engine won't be damaged. In this case, the water needs to be drained, the interior cleaned thoroughly, reassembled, and the oil replaced. Significant water in the engine: If there is a significant amount of water in the engine and it cannot run after starting, the only options are to replace the engine or scrap the car entirely.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.