What are the key points to observe for parallel parking in Subject 2 of the driving test?

2 Answers
DelKingston
07/30/25 1:50am
For parallel parking in Subject 2, there are mainly 2 key points to observe: point A at the upper left corner of the parking space and point C at the lower right corner. Below are the precautions for Subject 2 test: 1. Reverse parking into the garage: The main points for deduction include crossing the line while reversing, failing to enter the garage, exceeding the time limit, and not following the designated route. After the regulation reform, a time limit of 210 seconds is imposed for reverse parking, and exceeding this time will result in failure. During the test, you must first reverse into the right garage, then the left garage. Not following this sequence will result in failure. Pay attention to maintaining a 30cm margin while reversing. 2. Parallel parking: The main points for deduction include turn signals, 30cm margin, and crossing the line. When entering the test area, steer right in advance and align the highest point of the windshield wiper with the roadside line to adjust the 30cm margin. While reversing, remember the first right full lock point, straightening, left full lock, parking in the garage, and turning on the left turn signal. When exiting, observe the rearview mirror to prevent the wheels from crossing the line on either side. 3. Right-angle turn: The main points for deduction include turn signals and crossing the line. After entering the test area, turn on the turn signal and turn it off after the voice prompt. Incorrect operation of the turn signal will deduct 10 points. After entering the right-angle turn, adjust the body to maintain a 30cm margin from the side line, similar to parallel parking. When making the full lock, slightly release the clutch to prevent stopping or stalling midway. Straighten the body after the rear wheels exit to prevent the wheels from crossing the line.
Was this review help?
16
1
Share
MollyFitz
08/15/25 7:42am
When teaching my friend to practice driving, I always emphasize several key reference points. Adjust the car body to be about 30 centimeters from the sideline and drive parallel past the garage. Stop immediately when the driver's seat passes the garage corner, then shift into reverse. At this point, focus on the right rearview mirror—once the garage corner completely disappears from view, turn the steering wheel fully to the right. This is the critical step. Next, watch the left rearview mirror and straighten the wheel as soon as the rear door handle aligns with the right rear garage corner. Finally, turn your head to observe the left rear wheel—the moment the tire touches the dotted line, immediately turn the steering wheel fully to the left, allowing the car to glide slowly into the garage. Mastering these reference points ensures 90% of people can pass with ease.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Which gear should be used for a left turn in Subject 3?

Turning can be done in third gear, but the speed should be controlled at around 20 km/h. It can also be done in second gear, but idling is not allowed. After turning, you should immediately shift to third gear. Below is the relevant content: Deceleration and downshifting: During the C1 Subject 3 test, the requirement for turning gear is to decelerate and downshift. Otherwise, it is easy to have a mismatch between speed and gear, which may result in point deductions and can also cause the car to stall. It is recommended to decelerate and downshift. Subject 3: Also known as the road test, it generally includes: preparation before starting, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving.
4
1
Share

Can Old Motorcycles Be Licensed?

Old motorcycles can be licensed, but the prerequisite is that all procedures are complete and the vehicle's factory certificate is within the validity period. Taking Chengdu City as an example, the materials required for motorcycle licensing are as follows: Material 1: Original identity proof of the vehicle owner (for residents, the identity proof is the "Resident Identity Card" or "Temporary Resident Identity Card". For mainland residents living in temporary residences, the identity proof is the "Resident Identity Card" or "Temporary Resident Identity Card", along with the residence or temporary residence certificate issued by the public security authority); Material 2: Original proof of the vehicle's origin; Material 3: Original factory certificate of conformity for domestically produced motor vehicles; original "Goods Import Certificate" for imported motor vehicles; original "Notification of Entry (Exit) and License (Cancellation) for Vehicles under Customs Supervision of the People's Republic of China" for customs-supervised motor vehicles.
4
4
Share

What are the four basic types of car insurance?

Car four basic insurance are vehicle damage insurance, third-party liability insurance, no-deductible insurance, and passenger insurance. The following is the relevant introduction: Vehicle damage insurance: Vehicle damage insurance, abbreviated as 'vehicle loss insurance', is the most widely used type of vehicle insurance. Whether it's minor scratches or serious damage, the insurance company will cover the repair costs. Third-party liability insurance: Third-party liability insurance refers to the financial liability that the insured or their permitted drivers must bear for accidental injuries or direct property damage to third parties caused by the use of the insured vehicle during an accident, which the insurance company is responsible for compensating. No-deductible insurance: No-deductible insurance means that if an accident within the scope of insurance liability occurs to a vehicle insured with vehicle damage insurance and third-party liability insurance, resulting in vehicle damage (excluding theft) or third-party liability compensation, the insurer is responsible for compensating the amount stipulated in the 'Terms'. Passenger insurance: Passenger insurance refers to the financial liability that the insured must bear for personal injuries or deaths of passengers in the insured vehicle caused by an accident during the use of the insured vehicle by the insured or their permitted legal drivers during the insurance period, for which the insurer is responsible for compensating according to the provisions of this insurance contract.
16
0
Share

Can a Car Pass the Annual Inspection After Air Intake Modification?

Modifying a car's air intake system will prevent it from passing the annual inspection. However, modifications to the body color, engine, fuel type, and frame number are allowed, with the exception of three colors reserved for special vehicles, which cannot be used. Below is additional information: Permitted modifications: Changes to the body color, engine, fuel type, and frame number are allowed, but three colors are reserved for special vehicles and cannot be used; red is for firefighting vehicles, yellow for engineering rescue vehicles, and white over blue for national administrative law enforcement vehicles. Modifications to the body, frame, or engine are only permitted if the original parts are damaged beyond repair or have quality issues. Legal basis: Article 17 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states that if the registered contents on the vehicle's license do not match the actual condition of the vehicle during the safety technical inspection, or if the compulsory third-party liability insurance certificate is not provided as required, the inspection will not be passed.
11
3
Share

How to reset the maintenance light on Suzuki Ciaz?

Suzuki Ciaz maintenance light reset method is as follows: On the trip mileage display interface, press the right handle for more than 5 seconds until OIL appears in the lower right area of the display; quickly press the right handle 5 times within 2 seconds; OIL will blink 3 times and then turn off, indicating the reset is complete and the maintenance light is cleared. Additional information: 1. Car maintenance refers to the regular preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the service life. 3. Routine maintenance includes changing engine oil and oil filter, replacing three filters (air, cabin air, and fuel filter), checking and topping up brake fluid, coolant, and power steering fluid (replacing if necessary). The first maintenance for a new car is at 5,000 km, which is free of charge. Remember to bring the maintenance manual, user manual, service network directory, first free maintenance voucher, and pre-delivery inspection certificate.
20
0
Share

What Happens If You Put Diesel in a Gasoline Car?

Putting diesel in a gasoline car can cause symptoms such as engine shaking, black smoke from the exhaust, or even failure to start the engine. Differences between diesel and gasoline: 1. Gasoline is highly volatile, while diesel is difficult to evaporate: Gasoline vehicles emit fuel evaporation pollutants. 2. Gasoline mixes easily with air and does not separate easily: Gasoline molecules are smaller, whereas diesel mixes unevenly with air, inevitably leading to localized oxygen deficiency or excess. When fuel burns at high temperatures with insufficient oxygen, it tends to carbonize and form soot. Diesel combustion also produces some odorous organic gases, which is why diesel engine emissions have a distinct smell. 3. Diesel has higher energy density: Diesel does not require a spark plug and ignites under high pressure, making it more efficient but also heavier and noisier. Gasoline requires ignition, so gasoline engines are smaller and quieter. 4. They smell different: Gasoline has a pungent odor, while diesel has a milder smell. 5. They differ in color: Gasoline is light-colored, while diesel is darker. Diesel is mainly used in trucks; diesel engines rely on compression ignition and operate at relatively low speeds, resulting in lower power compared to gasoline engines and slower vehicle speeds. Gasoline is primarily used in passenger cars; gasoline engines use spark ignition, and their compression ratios are generally lower, typically ranging from 8-11 for naturally aspirated engines and not exceeding 14 for turbocharged ones.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.