···
Log in / Register

What are the key points to note for the Subject 3 driving test?

4 Answers
LeNova
07/28/25 8:49pm

Key points for the Subject 3 driving test are as follows: 1. Pre-test preparation: Walk around the vehicle before getting in, especially pausing near the monitoring area. After entering, fasten the seatbelt first, then adjust the seat and mirrors. 2. Light simulation: Before starting the light simulation test, check if the light switches are reset. Confirm all lights are completely off before requesting to begin the test, especially if the previous candidate failed the light test. If two consecutive voice commands use the same light, no action is needed after the current command; just wait for the next one. 3. Starting off: Always observe the surrounding traffic before starting. After starting, merge into the left lane as soon as possible, straighten the vehicle, accelerate, and shift to second gear. 4. While driving: Keep your eyes on the road ahead, looking as far as possible, while constantly monitoring the vehicle in front to avoid following too closely. 5. Intersections: Before reaching an intersection, if the speed is too high, slow down and shift gears in advance. Simultaneously, turn your head left and right to observe, ensuring the examiner sees these actions. 6. Lane changing: Before changing lanes, signal, check the mirrors, and only turn when it's safe. 7. Gear shifting: Do not press the accelerator and clutch simultaneously as it affects gear shifting smoothness. When shifting gears, fully depress the clutch, use your right hand to shift, and keep your left hand on the steering wheel to avoid veering off course. 8. U-turns: Always use first gear for U-turns and perform them in the leftmost lane. 9. Pulling over: Upon hearing the instruction to pull over, first turn on the right signal, then check if parking is allowed at that spot.

Was this review help?
4
4
Share
MacEverett
08/12/25 12:29am

Just finished the third driving test subject, and I feel it's essential to pay attention to every step from the pre-driving preparation to the entire exam process. When I took the test, I first checked if the car door was properly closed, adjusted the rearview mirrors, and made sure the seat and seatbelt were comfortable before starting the engine. When pulling out, I turned on the left turn signal and checked the rearview mirror to ensure no cars were coming. On the road, I constantly observed the surrounding traffic conditions. Before changing lanes, I had to signal for at least three seconds and check the blind spot to confirm no vehicles or pedestrians were there. At intersections, I slowed down for turns, carefully watched traffic lights and pedestrian movements, and avoided rushing through yellow lights. The parking segment was the hardest—after locating the examiner’s designated spot, I gently braked, shifted to neutral, pulled the handbrake, and didn’t forget to turn off the lights and engine. During practice, I lost points for neglecting blind spot checks, so I recommend simulating the test route more to reduce nervousness. Before the exam, review the rules for light usage, such as correctly turning on headlights for night tests. Stay calm, and don’t panic if you make a mistake. Good driving habits start here, making real-world driving much safer.

Was this review help?
4
3
Share
Expand All
LuciaFitz
09/30/25 7:57am

I'm the type who pays extreme attention to details. For the driving test (Subject 3), the focus is on safety protocols. The first thing upon entering the vehicle is checking if the dashboard indicators are normal, and the seatbelt must be securely fastened. After starting, lane changes must strictly follow three steps: signal with the turn indicator, check the rearview mirror, and inspect the blind spot—these actions should be fluid without delay. Intersection handling is crucial: decelerate and stop well before red lights, and be decisive when yielding. When parking in designated areas, gently apply the brakes to control speed, and ensure the vehicle is completely stationary before engaging the handbrake. Examiners place great emphasis on safety awareness, such as how to react to sudden road emergencies. I recommend practicing simulated emergency scenarios, like pedestrians or vehicles darting out unexpectedly, using controlled maneuvers to avoid danger. Remember, speed isn't the priority—steady operation and rule compliance are what get you through. Developing these habits makes everyday driving more reassuring too.

Was this review help?
15
1
Share
Expand All
McJuniper
11/14/25 3:01am

Taking the driving test (Subject 3) was a novel yet nerve-wracking experience for me. The key is to adjust your mindset properly. Before the test, I took deep breaths to relax and reviewed the basic maneuvers: signaling and checking surroundings when starting, slowing down for turns, and parking accurately without crossing lines. During the test, I didn’t think about the examiner’s scoring—just focused on the current action. Following instructions for light usage is simple; don’t overcomplicate it. Be decisive when yielding to avoid hesitation and mistakes. Initially, I often forgot to check blind spots during practice, but the test helped me develop the habit. Staying relaxed is most important; chatting with friends can ease anxiety. Passing means getting your license, with daily driving opportunities waiting.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

How to Use BMW Headlight Cleaning?

First, start the vehicle and turn on the headlights. Pull the wiper control lever towards the steering wheel; press and hold for 5 seconds to activate the front windshield cleaning mode. The headlight cleaning will automatically spray water twice and clean. During this process, keep the headlights turned on.
6
3
Share

How Does Insurance Cover a Flooded Car?

Disassembly fees, inspection fees, engine oil, and other maintenance or repair costs for a water-damaged vehicle's engine can be compensated under the vehicle damage insurance. If the engine special loss insurance is purchased, the cost of engine connecting rod and other damaged parts caused by water ingress can be covered.
2
5
Share

How to Clear the Tire Pressure Warning on BAIC New Energy Vehicles?

When the ignition switch is off, press and hold the "Reset" button. Turn on the ignition switch. Release the "Reset" button, then briefly press the "Clock Adjustment" button once. Press the "Clock Adjustment" button four times, and the multifunction display will show the remaining distance until the next maintenance service.
13
3
Share

How to Deal with Scratches on a BMW?

Toothpaste is the lowest-cost method for repairing car paint scratches, although it can only reduce the appearance of the scratches. Similarly, it provides a simple filling effect on scratches and can handle larger and deeper scratches. This is a paste-like repair agent similar to toothpaste, and its effect is also comparable to that of toothpaste.
7
1
Share

What are the solutions for insufficient power in the Besturn B70?

Including carbon deposits in the cylinders, throttle, and spark plugs, which require a carbon cleaning service at a 4S shop. Regular cleaning of the air filter is necessary, and it should be replaced at a 4S shop after reaching a certain maintenance interval. Insufficient engine oil or coolant levels require regular checks of the oil and coolant levels.
5
2
Share

How to Screen Mirror on Geely Haoyue?

Set the unknown sources on your computer to allow, enable USB debugging mode, and connect your phone to the car's USB interface with a data cable to use screen mirroring. Install the LeBo Screen Mirroring TV version in the car to use phone screen mirroring. Connect via Bluetooth through the software, then connect with a dedicated cable to enable screen mirroring.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.