What are the key points to note for the Subject 2 driving test?

1 Answers
DeMaximus
07/29/25 10:32am
Subject 2 test precautions include pre-exam driving practice considerations and reversing into garage precautions. Below is a detailed introduction to the precautions for the Subject 2 test: Pre-exam practice: Allocate time for practice before the test, ensuring all test items are repeatedly practiced at the training ground. If possible, conduct a mock test beforehand to familiarize yourself with the exam procedures, then have the instructor point out any issues during practice. Reversing and garage entry precautions: The first challenge is reversing into the garage, as there may be many people, increasing the risk of collisions when competing for garage space. Therefore, if possible, wait briefly and choose the last garage. Once inside, an onboard broadcast will notify you to start the reverse garage test. Simply follow your usual practice routine, observe reference points, steer the wheel carefully, and watch for boundary lines—especially ensuring neither side's line is crossed when entering the garage.
Was this review help?
11
3
Share
More Forum Discussions

What are the hidden features of the Haval H6 Platinum Champion Edition?

Haval H6 Platinum Champion Edition hidden features include: 1. Auto re-lock function: When the vehicle is in a locked state, after unlocking the doors, if no door or trunk is opened within 30 seconds, the vehicle will automatically lock again; 2. Failed lock reminder: When the engine is off with ignition switch in LOCK position, the doors cannot be properly locked if any door remains unclosed; 3. Emergency door locking. Taking the 2020 Haval H6 1.5GDIT Automatic Platinum Champion Edition as an example: It is a compact 5-door 5-seat SUV under Great Wall Motors, measuring 4600mm in length, 1860mm in width, and 1720mm in height with a 2680mm wheelbase, equipped with a 7-speed dual-clutch transmission.
16
2
Share

How to Set Up the Hidden Feature of Horn Sound When Locking the Tiguan L?

The hidden feature of horn sound when locking the Tiguan L cannot be set up by yourself. It requires visiting a 4S store to reprogram the ECU. The horn sound function when locking the car is set to silent by default in the factory settings of the Volkswagen Tiguan models. Here are some details about the Tiguan L: 1. Body Dimensions: The vehicle's body dimensions are 4712 mm in length, 1839 mm in width, and 1673 mm in height, with a wheelbase of 2791 mm. 2. Other Details: The vehicle is a five-door, five-seat or seven-seat SUV with a fuel tank capacity of 60 liters and a luggage compartment volume ranging from 495 liters to 1780 liters. The model is positioned as a mid-size SUV.
9
2
Share

What does active grille shutter mean?

Active grille shutter refers to an air intake grille that can automatically adjust its opening degree. Here are some additional details: 1. After starting the vehicle, the active grille shutter automatically adjusts its opening based on the engine temperature, achieving rapid warm-up effects. This allows the engine to reach its optimal operating state in the shortest time possible, especially during cold winters. Faster warm-up also means passengers can enjoy warm air sooner. Temperature significantly impacts engine performance, and the engine operates most fuel-efficiently at its optimal working temperature. Therefore, accelerating the engine's transition to its ideal operating temperature in cold conditions indirectly improves fuel economy. 2. When driving at high speeds, excessively open windows increase wind resistance, burdening the vehicle. As the car's 'front gate,' if the air intake grille remains wide open, it will inevitably increase wind resistance and fuel consumption. Timely closure of the grille results in a lower drag coefficient, enhancing both vehicle stability and fuel efficiency.
11
1
Share

What are the contents of the manual transmission test in Subject 2?

Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. The C1 test items include five mandatory tests: reversing into the garage, parallel parking, stopping and starting on a slope, making a right-angle turn, and driving through curves (commonly known as S-turns). Some areas also include a sixth item: high-speed toll card collection. The points deduction for Subject 2 is as follows: 1. Not wearing a seatbelt: deduct 100 points. 2. Starting the engine with the gear not in neutral: deduct 100 points. 3. Stalling once: deduct 10 points. 4. Wheels pressing against the edge line: deduct 100 points. 5. Stopping for more than 2 seconds during the test: deduct 5 points. 6. Not following the prescribed route or sequence: deduct 100 points.
19
0
Share

What is Fuel Injection Timing?

Fuel injection timing refers to the correct fuel supply time of the injection pump, generally expressed by the fuel injection advance angle. The fuel injection advance angle is the crankshaft rotation angle from when the No.1 cylinder plunger of the injection pump begins supplying fuel until the piston of that cylinder reaches top dead center. Below is the relevant introduction: The fuel injection advance angle is the crankshaft rotation angle from when the No.1 cylinder plunger of the injection pump begins supplying fuel until the piston of that cylinder reaches top dead center. Generally, the fuel injection advance angle for diesel engines is 15-25°. If the fuel injection advance angle is too large or too small, it will affect the engine's working performance. When a vehicle has traveled a certain mileage or after the injection pump has been overhauled and reinstalled during maintenance, the fuel injection timing must be checked and adjusted to ensure the diesel engine operates under the optimal or near-optimal fuel injection advance angle.
11
0
Share

Do LED Headlights with Fans Require Dust Covers?

LED headlights with fans require the installation of dust covers. Universal dust covers can be used, which are designed to expose the heat dissipation or fan of the LED headlights. This solution addresses both dust prevention and heat dissipation, providing a better cooling environment. Automotive dust covers are protective accessories used to prevent dust accumulation on vehicles. They are primarily installed on steering mechanisms, drive shafts, and other widely distributed areas such as handbrakes, foot brakes, throttle linkages, master brake cylinders, and wheel cylinders. Advantages of LED headlights with fans: Fan cooling is an active heat dissipation system, offering higher cooling efficiency. Due to fan cooling, the heat from the headlights can be distributed promptly, lowering the temperature and thereby increasing brightness. With fan cooling, the new three-sided LED headlights achieve exceptionally high brightness.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.