···
Log in / Register

What Are the Key Points of Subject 2 Driving Test?

3 Answers
AdrielRose
07/29/25 5:55am
Driving license Subject 2 test key difficulties and points include: Reverse Parking: Widely regarded as the most challenging part of the Subject 2 test, its main difficulty lies in mastering the timing of steering wheel rotation. Hill Start and Parking: Rolling back or stalling during hill starts are common issues. If the vehicle shows signs of rolling backward when releasing the brake, immediately press both the brake and clutch firmly to stabilize the car, then restart using the same method. 90-degree Turn: There are multiple techniques for executing a 90-degree turn. The simplest method is to fully turn the steering wheel when the hood covers the opposite yellow line.
Was this review help?
16
4
Share
MacKevin
08/12/25 8:36pm
When I took the driving test for Subject 2, my palms were sweating. The hardest part was the reverse parking—you had to remember the reference points the instructor taught, turn the steering wheel slowly without jerking, and stop immediately once the car was in the space. Touching the line meant failure. The hill start was also nerve-wracking; you had to control the clutch to prevent rolling back, and releasing it too quickly would stall the engine. For parallel parking, adjusting the angle precisely to avoid hitting the edge was crucial. For the 90-degree turn, you had to prepare the steering in advance, and for the curve driving, maintaining low speed while following the line was key. Before the test, I practiced for half an hour daily, simulating the scenarios. During the exam, I took deep breaths and passed on the first try. The key is consistent practice, staying calm, and not overthinking the outcome.
Was this review help?
8
4
Share
Expand All
McLayla
10/03/25 8:13am
Over the years of coaching students for Subject 2, the core test points have always been basic venue skills: reverse parking, parallel parking, hill start, right-angle turns, and curve driving. For reverse parking, you must precisely align reference points using mirrors; for hill starts, maintain clutch control. Students often make mistakes due to nervousness, like sudden braking causing wheel crossing or stalling on slopes. I always emphasize practicing slowly to master reference points first—exam rules are strict, with deductions for any error. Review recordings to improve, simulate test conditions beforehand, and familiarize yourself with the clutch engagement point. Consistent daily practice builds solid fundamentals for guaranteed success.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

Can the Three-Way Catalytic Converter Still Be Used After Water Ingress?

The three-way catalytic converter can still be used after water ingress. Below is an introduction to related content about water-damaged vehicles: 1. Specific definition of water-damaged vehicles: The vehicle starts to accumulate water, and internal components suffer damage due to the water. Water-damaged vehicles also have corresponding flood levels. 2. Classification of flood levels for water-damaged vehicles: Flood level one is when water just reaches the vehicle's chassis, flood level two is when water reaches half of the wheels, flood level three is when water almost completely submerges the tires, flood level four is when water reaches the engine hood, flood level five is when water completely submerges the engine hood, and flood level six is when water submerges the roof.
20
1
Share

Can the front and rear tires of a rear-wheel-drive car have different widths?

Rear-wheel-drive cars can have different widths for the front and rear tires. Tires on the same axle must be the same width: The two front tires must be the same width, and the two rear tires must also be the same width. This means that tires on the same axle must have consistent specifications, including diameter, tire width, and wear level. However, if the front and rear tires have different widths, it is important to pay attention to driving safety, especially in extreme road conditions, and monitor tire usage. Tire diameter must be consistent: While the front and rear tires can have different widths, their diameters must still be the same. Otherwise, the car body may tilt, which is not conducive to safe driving.
20
3
Share

Where is the interior light switch located in the car?

There are two types of switches for interior lights: one is a manual switch, with the button located next to the light for direct operation to turn the light on or off; the other is an automatic switch. Interior lights are installed in various parts of the car to facilitate safe entry and exit at night, as well as for reading maps while driving. Interior lighting includes instrument panel lights, ambient lights, and dome lights. Other interior lights include those for the glove box, vanity mirror lights in the sun visor, illumination for heater and audio controls, as well as cup holders, ashtrays, and auxiliary instrument panel lights. In some lighting fixtures, LED light sources are used to achieve slim designs and energy efficiency.
19
4
Share

Where is the Audi A7 produced?

Audi has six production bases worldwide, located in Brazil, China, Belgium, Hungary, Italy, and Germany. Audi A7 dimensions: The new generation Audi A7 has a body size of 4969/1908/1422mm in length, width, and height, with a wheelbase of 2926mm. It still maintains the four-door supercar configuration, and the main body material is aluminum alloy. Audi A7 powertrain: The vehicle is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190ps, a maximum power of 140kw, and a maximum torque of 320nm, paired with a 7-speed dual-clutch transmission.
13
3
Share

What documents come with a new car?

Documents provided with a new car include the vehicle certificate of conformity, complete vehicle basic information form, warranty card, and maintenance manual. Vehicle Certificate of Conformity: This is the national certification proving the vehicle meets standard requirements, and it's essential for vehicle registration. Only vehicles with this certificate comply with national quality and relevant standard requirements for motor vehicles, thus being eligible for license plate registration. Complete Vehicle Basic Information Form: Clearly records the details of the purchased vehicle. If discrepancies between the actual vehicle and the documented information are found by relevant authorities during tax payment or registration, the process will not be approved. Warranty Card and Maintenance Manual: Required for vehicle maintenance and repairs during the warranty period.
18
4
Share

Do Used Cars Not Require Purchase Tax?

Used cars do not require payment of purchase tax. Specific explanations are as follows: A vehicle only needs to pay purchase tax once, generally when purchasing a new car. However, if the purchase tax was not paid when the new car was purchased, the new owner will need to make up the purchase tax portion after the used car transaction. The "Vehicle Purchase Tax Law of the People's Republic of China" stipulates: Vehicle purchase tax is levied once. Vehicles that have already paid purchase tax will not be subject to purchase tax again. Therefore, buying a used car that has already paid purchase tax does not require paying it again. However, in reality, some vehicle models can pay half or be exempt from purchase tax when purchasing a new car. For these types of cars, the purchase tax must be made up when selling them as used cars.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.