What are the key points of Subject 2?

1 Answers
DominicFitz
07/29/25 4:41pm
The key points of Subject 2 are as follows: 1. Use first gear and idle speed throughout the process, do not press the accelerator to speed up, and drive steadily and slowly. 2. When parallel parking, if you cannot see the rear wheels in the rearview mirror, you can lean your head out or tilt your head to look at the rearview mirror. 3. When starting on a slope, be sure to stabilize the clutch and control the balance between the accelerator and clutch to avoid stalling or rolling back. 4. Before entering a sharp turn, slow down and straighten the wheels or align the car body, staying as close to the right side line as possible. 5. When driving on a curve, do not turn the steering wheel too sharply; after entering the curve, try to take a wider path. 6. During reverse parking, use first gear and reverse gear with idle speed, aim accurately, control the key points and timing, and know how to make minor adjustments to correct any deviations observed in the rearview mirror.
Was this review help?
2
4
Share
More Forum Discussions

Where is the button to turn on the car air conditioner?

The button to turn on the car air conditioner is located on the center console, marked with an AC symbol. Pressing the AC button will gradually lower the temperature inside the car. The car air conditioning refrigeration system consists of components such as the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower, all connected by copper pipes and high-pressure rubber hoses to form a sealed system. The car air conditioner can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers and reducing driver fatigue, thereby enhancing driving safety. It generally includes a refrigeration unit, heating unit, and ventilation unit.
6
4
Share

Where is the fuel tank switch of the Magotan?

The fuel tank switch of the Magotan is located under the driver's seat. The specific location and usage method are as follows: 1. Locate the fuel tank cap switch under the driver's seat of the Magotan; 2. Pull up the fuel tank cap switch of the Magotan; 3. Unscrew the fuel tank cap counterclockwise; 4. Hang the removed fuel tank cap of the Magotan on the cover plate; 5. Tighten the fuel tank cap of the Magotan clockwise; 6. Secure the cover plate. The Magotan refers to the Volkswagen Magotan, which is the first B-class sedan produced and sold by FAW-Volkswagen since its establishment. The 1.8TSI engine equipped in the Magotan is developed by Volkswagen AG in Germany, embodying the advanced engine technology level internationally.
20
0
Share

What are the precautions for Subject Three?

Precautions for Subject Three: 1. Check before getting in the car: Before the test, you need to walk around the car for inspection. There are usually two sensors on the test car, one at the front and one at the back. When walking around the car, you need to pause briefly near the sensors to ensure they are detected; 2. Adjust before operating: Adjust the car's rearview mirrors and seat height, and confirm if they are suitable after adjustment. When observing through the rearview mirrors, make sure you can see the rear wheels; 3. Light simulation test: The light simulation test requires students to master it flexibly. During practice, master the skills of using the lights, and perform the relevant light operations within 5 seconds after the test instruction is issued; 4. Follow the prompt instructions: During Subject Three, you need to follow the prompt instructions. Listen to the instructions clearly before operating, and do not operate in advance before the voice broadcast ends, as it may easily lead to point deductions.
5
1
Share

What causes the car reversing camera to have no signal?

The reasons for no signal in the car reversing camera include: 1. Poor line contact; 2. The camera has been used for too long, resulting in poor chip photosensitivity; 3. There is a defect in the car circuit. The reversing camera is also known as the parking assist system, or the reversing visual system, or the vehicle monitoring system. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. The reversing camera system can also see clearly at night through infrared rays, and the vehicle probe has anti-magnetic, anti-vibration, waterproof, and dustproof performance. The vehicle display uses TFT true color, has been treated with anti-magnetic to eliminate signal interference and flicker, can receive two videos at the same time, and can play VCD and DVD without a decoder.
3
5
Share

How to Maintain Car Glass?

Car glass maintenance methods include: 1. Proper use of windshield washer fluid: Windshield washer fluids are categorized into summer-use fluid, winter antifreeze fluid, and special antifreeze fluid. Choose the appropriate fluid based on the season and specific weather conditions; 2. Applying a protective film to the glass: The film not only prevents scratches but also provides heat insulation and UV protection. Precautions for car glass maintenance include: 1. Thoroughly remove dirt from the car glass; 2. Turn off the defroster and heater after 5 to 10 minutes of use to prevent rear window glass from cracking; 3. Avoid washing the car and drive on flat roads for two days after replacing the glass; 4. Regularly maintain or replace wipers if they do not fit tightly against the glass, as this can cause scratches and affect functionality; 5. Regularly replace rubber seals to prevent leaks due to aging.
3
2
Share

Why is there water leaking under a new car?

There are two possible reasons for water dripping under the car chassis: 1) Air conditioning condensation water - most vehicles don't have water collection hoses underneath, so the condensation from AC operation drains directly from the chassis. 2) It could also be caused by damage to the windshield washer fluid pipe due to chassis scraping. Additional information about car chassis: 1) Introduction: The automotive chassis consists of four systems - the transmission system, running gear, steering system, and braking system. Its functions include supporting and installing the engine and other components, forming the vehicle's overall shape, receiving engine power to enable movement, and ensuring normal operation. 2) Main components: The transmission system typically includes the clutch, gearbox, universal transmission device, final drive, differential, and half shafts.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.