What are the items that require brake tapping in Subject 3?

1 Answers
StSadie
07/30/25 12:58am
Subject 3 requires brake tapping in the following items: 1. Driving straight through an intersection: Due to the complex situation at intersections, there may be vehicles or pedestrians passing. Students should tap the brake in advance to slow down when preparing to pass through the intersection, and the speed should not exceed 30km/h. Even if the traffic light is green with no vehicles or pedestrians obstructing, you must lightly tap the brake. Otherwise, the examinee will be directly judged as failing. 2. Left and right turns: Whether it is a left turn or a right turn, you must turn on the turn signal in advance, then slow down (some examinees drive relatively slowly during the test, but must still tap the brake before turning) before passing. 3. Passing a bus station: Generally, there will be a voice prompt. If there is no voice prompt, pay attention to the roadside sign. When passing, tap the brake and pass slowly.
Was this review help?
1
4
Share
More Forum Discussions

How to Adjust a Lighter Steering Wheel?

Methods to adjust a lighter steering wheel: 1. Start the engine and shift into gear, hold for 3 seconds; 2. Turn the steering wheel to full lock, hold for 3 seconds, then return to center and turn off the engine; 3. When driving again, the steering wheel will feel lighter. Steering assistance mainly includes hydraulic power steering and electric power steering. Vehicles with electric power steering can adjust the steering wheel, while some vehicles with factory-set steering cannot be adjusted unless modified. Common reasons for a heavier steering wheel include: 1. Dirty power steering fluid; 2. Low tire pressure. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and transmit it to the steering shaft.
11
1
Share

Will Changing Oil Without Replacing the Filter Damage the Car?

Changing the oil without replacing the oil filter can be harmful and may damage the car. The oil filter is designed to remove impurities from the oil. If you only change the oil without replacing the filter, the new oil may degrade faster and accumulate more impurities, leading to increased engine wear. Since the filter is not very expensive, it is recommended that car owners always replace it along with the oil. Below are some key points about oil filters: 1. Point one: The oil filter cleans the oil. As oil circulates through the engine, it inevitably picks up some impurities and particles, which the filter helps to remove. 2. Point two: Without an oil filter, particles in the oil would continuously circulate within the engine, significantly increasing engine wear.
11
1
Share

How low can the engine oil level be before it's unsafe to drive?

The engine oil level should not be too low nor overfilled. It's best to maintain it between the upper and lower marks on the dipstick. The dipstick has two standard lines or holes - the oil level should ideally be in the middle. Overfilling engine oil can cause excessive fuel consumption due to increased crankcase pressure, and accelerate wear on cylinders and pistons, reducing the vehicle's lifespan. Relevant information about engine oil is as follows: 1. Introduction 1: Engine oil, commonly known as "lubricating oil", is often referred to as the "blood" of a car if we consider the engine as its "heart". 2. Introduction 2: When the engine starts, friction occurs between components. Combined with high engine temperatures, prolonged operation can cause wear to the vehicle. Engine oil serves to properly maintain and protect the engine.
1
5
Share

Should I replace the outer tire or the entire tire when changing tires?

Not all cars require replacing both tires when changing them, but for safety reasons, it is best to replace both tires together. The brand, specifications, tread pattern, and structure of these two tires should be consistent. Additionally, it is recommended to install the new tires on the drive wheels. Relevant information about car tires is as follows: 1. Introduction One: The main functions of tires are to support the entire weight of the vehicle, bear the load of the car, transmit traction and braking torque, ensure the adhesion between the wheels and the road surface, reduce and absorb vibrations and impact forces during driving, prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency. 2. Introduction Two: Tires are usually composed of three parts: the outer tire, inner tube, and flap. There are also tires that do not require an inner tube, with an inner layer of the tire body having a rubber layer with good airtightness, and requiring specialized rims. Tire structures worldwide are developing towards tubeless, radial structures, flat (small ratio of tire section height to width), and lightweight designs.
19
0
Share

What is the torque of a pneumatic wrench?

Pneumatic wrench torque ranges between 500~800N.M. Here are the relevant introductions: 1. Introduction to pneumatic torque wrenches: A pneumatic torque wrench is a torque wrench that uses a high-pressure air pump as the power source. It is driven by one or two powerful pneumatic motors to drive a torque multiplier with three or more planetary gears. 2. Classification of pneumatic wrenches: Pneumatic wrenches are generally divided into two categories, one is conventional, which is a very ordinary impact wrench, and the other is a pulse pneumatic wrench. The difference between the two is that the former cannot set torque, while the latter can. Pneumatic torque wrenches belong to the latter.
20
5
Share

What is the A/C device in a car?

The A/C button in the car's air conditioning system is the switch for the vehicle's air conditioning compressor. The A/C button controls the on and off of the vehicle's compressor. When the A/C switch is pressed, the air conditioning compressor starts working. Here is some related information about the car air conditioning: 1. How to use the A/C button: When the weather is hot and you need to turn on the air conditioning to cool down, press the AC button, adjust the temperature control knob to the blue section, and then turn on the fan switch. The indicator light on the button will illuminate, and the car's air conditioning compressor will start working, blowing cold air from the vents. 2. How car air conditioning works: After turning on the air vent, the air conditioning will blow air because the blower in the air conditioning system starts working at this time. However, the air conditioning cooling system has not yet started because the air conditioning compressor has not begun to work.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.