What are the items for annual vehicle inspection?

How many seconds does the Mercedes-Benz C200L take to accelerate from 0 to 100 km/h?

The Mercedes-Benz C200L takes 7 to 8 seconds to accelerate from 0 to 100 km/h. In terms of the powertrain, it is equipped with a 1.5T four-cylinder turbocharged engine, delivering a maximum power of 156 horsepower and a maximum torque of 250 Nm. For the transmission system, it is paired with a 9-speed automatic manual transmission. In terms of body dimensions, the Mercedes-Benz C200L measures 4783mm in length, 1810mm in width, and 1442mm in height, with a wheelbase of 2920mm. Exterior-wise, the Mercedes-Benz C200L features a youthful and stylish design. The front fascia boasts a star-studded grille that exudes a premium feel, with the prominent three-pointed star logo standing out. The matrix LED headlights are bright and spirited, while the lower honeycomb air intake highlights a sporty vibe. The side profile of the car is compact and well-proportioned, with sharp and dynamic character lines that convey a strong sense of power. The rear end is rounded and sensual, with sleek and refined taillights, blending fashion and vitality.

19

2

Share

What is a Pressure Plate?

A pressure plate is a metal disc that, under normal conditions, tightly clamps the clutch disc to form a single unit. It rotates with the engine and transmits power to the transmission. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is bolted to the rear face of the flywheel, and the output shaft of the clutch serves as the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby interrupting or transmitting the engine's power to the transmission. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be disconnected or engaged at any time. Relationship Between Clutch and Pressure Plate: The clutch pressure plate is a metal disc that, under normal conditions, tightly clamps the clutch disc to form a single unit. It rotates with the engine and transmits power to the transmission. When the clutch pedal is depressed, the pressure plate separates from the clutch disc, cutting off the engine's power output and enabling gear shifting. Releasing the clutch pedal causes the pressure plate to re-engage with the clutch disc, resuming power transmission.

18

5

Share

Where is the negative terminal cable of the Citroen C4L located?

The negative terminal cable of the Citroen C4L is located on the battery box, covered by a black square lid. After opening this lid, you can see the negative terminal post, which is black. The Citroen C4L is a compact family car under the Citroen brand, equipped with two turbocharged engines: 1.2L and 1.6L. These engines are paired with either a 5-speed manual transmission or a 6AT transmission. In terms of exterior design, the Citroen C4L features a new front face design where the double chevron logo is integrated with the grille. The upward-slanting cut headlights, dual creases on the hood, and overall front lines create a more dynamic and smooth appearance. The crystal-cut LED daytime running lights add a premium touch, along with the double-layer grille and lowered front bumper design. Regarding dimensions, the Citroen C4L measures 4620mm in length, 1780mm in width, and 1498mm in height, with a wheelbase of 2710mm.

4

0

Share

Is the production capacity of BYD Song Plus DM-i high?

No, the reason is that its battery supply cannot keep up. Two versions of the Song Plus DM-i: The two versions offer pure electric ranges of 51km and 110km. The Song PLUS-DM-i 51km range version accelerates from 0-100km/h in 8.5 seconds, with a combined fuel consumption as low as 4.4L/100km in depleted battery state. The 110km version can achieve a maximum pure electric range of 110km, with a combined range exceeding 1200km on a full tank. It accelerates from 0-100km/h in 7.9 seconds, with a depleted battery fuel consumption of 4.5L/100km. In terms of configuration: The new vehicle comes standard with features including soundproof glass, tire pressure display, 360-degree panoramic imaging, a 12.8-inch rotatable central control screen, DiLink 3.0 system, in-car Bluetooth, 9-speaker audio system, OTA remote upgrade, rear seat angle adjustment, electric folding and heating/defrosting exterior mirrors, keyless entry/start, mobile NFC key, and rear privacy glass.

17

0

Share

What Are the Reasons for BYD's Lack of Acceleration When the Throttle Is Pressed?

BYD's lack of acceleration when the throttle is pressed can be attributed to the following reasons: Issues with the clutch: If the clutch plate is excessively worn, the friction between the engine flywheel and the clutch plate decreases, causing slippage during operation. When accelerating, the engine's power cannot be fully transmitted through the clutch to the transmission and wheels, as some of the power is lost due to slippage. This results in minimal speed increase when the throttle is pressed. Another scenario is improper clutch travel adjustment, leading to poor acceleration. For example, if the clutch's free play is too small or nonexistent, the clutch remains in a semi-engaged state, which also prevents the vehicle from accelerating effectively. Excessive carbon buildup: If there is too much carbon buildup on the engine's fuel injectors, spark plugs, or throttle body, it affects the air-fuel mixture in the engine cylinders, making it either too lean or too rich. Inadequate combustion of the air-fuel mixture reduces engine power, making it difficult to increase speed. Carbon deposits on the fuel injectors can also lead to poor fuel atomization or even dripping fuel instead of proper atomization. Similarly, weak or absent spark from the spark plugs can contribute to acceleration issues when pressing the throttle.

13

1

Share

Can a D license be changed to an E license after application?

A D license cannot be changed to an E license after application. Once registered, the license type cannot be arbitrarily changed because an E license is suitable for ordinary two-wheeled motorcycles, while a D license is intended for three-wheeled motorcycles, hence the change is not permitted. If you wish to obtain a D license, you must either cancel the E license exam and reapply or wait until one year after obtaining the E license to apply for an additional license. Classification of driver's licenses: Driver's licenses are divided into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. The Ministry of Public Security has further subdivided the three types of permitted driving vehicles currently endorsed on driver's licenses—namely A, B, and C licenses—into seven categories based on the driving difficulty and safety requirements of different vehicle types, to enhance the specificity of management. Additional licensing: Individuals who have just obtained a driver's license (such as a motorcycle license) can only take other types of driver's license exams after one year. During the registration and examination process for additional licensing, applicants must bring their ID card and the previously obtained driver's license. Those who pass the exam will be eligible for the additional license.

16

2

Share

What are the items for annual vehicle inspection?

How many seconds does the Mercedes-Benz C200L take to accelerate from 0 to 100 km/h?

What is a Pressure Plate?

Where is the negative terminal cable of the Citroen C4L located?

Is the production capacity of BYD Song Plus DM-i high?

What Are the Reasons for BYD's Lack of Acceleration When the Throttle Is Pressed?

Can a D license be changed to an E license after application?

Why Can't the Gear Shift Move?

What is the function of a car VPS?

What are the impacts of new energy vehicles in Northeast China during winter?

What is the reason for the Piaggio X7 leaking coolant?