What are the issues to pay attention to when buying a used car?

1 Answers
LaCorbin
07/29/25 3:42pm
When purchasing a used car, attention should be paid to the car's performance, structure, documentation, and appearance. The main issues are as follows: Performance: Listen for any abnormal sounds, start the car, and listen to the engine's sound. Structure: Check the chassis and frame for any deformations. After an accident, the frame and chassis are difficult to repair. Documentation: Registration certificate, vehicle license, purchase tax, and other documents. Always take a test drive, whether buying a new or used car. Appearance: Observe all corners and accessories of the car for any repainting, and check for wear on the tires, headlights, and bumper.
Was this review help?
2
2
Share
More Forum Discussions

Why Won't My Car Start with Push Button Start?

Reasons why a car won't start with push button start: 1. Steering wheel lock: If the steering wheel is turned after the car is turned off, it may lock. Solution: Turn the steering wheel left and right while pressing the push button start. 2. Gear not in P position: Due to system protection mechanisms, an automatic transmission car won't start if it's not in Park (P) position. 3. Key fob battery dead: When the car key's battery is dead or low, the car's internal sensors can't detect it, preventing the car from starting. 4. Incorrect starting method: Some car models require pressing the push button start twice to start the car; others require holding the button down to start the car.
5
2
Share

What Causes the Car Lights to Stay On?

There are two possible reasons why car lights remain on: first, the interior lighting in the car has not been turned off; second, the car is not locked and is still in standby mode. Car lights refer to the lamps on a vehicle, serving as tools for road illumination during nighttime driving and as signaling devices for various driving indications. Car lights are generally categorized into headlights, taillights, turn signals, etc. Below are the correct usage methods for car lights: 1. Poorly lit roads: On roads with no streetlights or inadequate lighting, high beams can be used. However, when encountering other vehicles or pedestrians, switch to low beams to avoid glare. 2. When needing to read road signs: If unfamiliar with the road and needing to read signs, high beams can be used temporarily but should be quickly switched back to low beams. 3. When overtaking: The left turn signal should be activated in advance, and high beams or the horn can be used alternately to alert the vehicle ahead to yield. 4. When passing corners, curves, or intersections without traffic signals: Alternating between high and low beams can serve as a warning. 5. When driving in tunnels: Turn on high beams, but switch to low beams in advance when encountering oncoming vehicles. 6. In urban areas with streetlights at night: Low beams must be used. 7. In areas without streetlights at night: When driving in areas without streetlights at night or during dusk or dawn when visibility is low, low beams must be turned on. 8. Obstructed visibility: In conditions such as heavy fog, snow, or heavy rain where visibility is obstructed, low beams must be used even during the day.
4
5
Share

Does Compulsory Traffic Insurance Cover Water Damage?

Compulsory traffic insurance does not cover water damage to your vehicle, as it is designed to compensate for damage to third-party vehicles and individuals. To claim for vehicle damage, you must have purchased vehicle damage insurance. Compulsory traffic insurance is mandatory by the state and is required for legally driving on the road. Without it, according to Article 98 of the Road Traffic Safety Law, the traffic management department of the public security authority may impound the motor vehicle, require the party to provide the corresponding license, certificate, or mark, or complete the necessary procedures, and may issue a warning or impose a fine ranging from 20 to 200 yuan. Automobile Compulsory Traffic Insurance: The full name of compulsory traffic insurance is "Compulsory Liability Insurance for Motor Vehicle Traffic Accidents." It is a mandatory liability insurance where the insurance company compensates for personal injury, death, and property damage to victims (excluding vehicle occupants and the insured) caused by road traffic accidents within the liability limits. The premium is based on the nationally unified standard rates. However, the price of compulsory traffic insurance varies depending on the vehicle type, primarily influenced by the number of seats. Compared to the more than 20 exemption clauses in commercial third-party insurance, compulsory traffic insurance covers a broader range, including losses caused by intentional acts of the victim, property damage to the insured, related arbitration and litigation costs, and certain indirect losses from accidents. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory traffic insurance will provide compensation within the liability limits. Introduction to Electronic Insurance Policies An electronic insurance policy refers to a digital policy issued by an insurance company using digital signature software and enterprise digital certificates that comply with the PKI system, bearing the electronic signature of the insurance company. An insurance policy, abbreviated as a policy, is the formal written proof of the insurance contract between the insurer and the insured. It must fully record the rights, obligations, and responsibilities of both parties to the insurance contract. The content of the insurance policy serves as the basis for both parties to fulfill the contract. The insurance policy is proof of the establishment of the insurance contract. Advantages of Electronic Insurance Policies: Saves paper resources, eliminating the need to print insurance proof marks; Saves time and is convenient, not restricted by time or location, with information accessible online anytime, quickly and easily; Allows for reissuance and resending, eliminating concerns about loss. If a paper version is needed offline, it can be printed or mailed; Facilitates management, as electronic standardization makes it easier for insurance companies and traffic police departments to manage insurance information for various vehicles.
2
1
Share

Should the Cayenne use 95 or 98 octane gasoline?

Official Porsche Cayenne data indicates that it should use 95 octane or higher gasoline. This means the Porsche Cayenne can use either 95 octane or 98 octane gasoline, with 98 octane being the preferred choice. 98 Octane Gasoline: Using 98 octane gasoline results in more complete combustion and stronger power output. However, in remote areas, 98 octane fuel may not be available, requiring the use of 95 octane as an alternative. Under no circumstances should 92 octane be used. Risks of Using Lower Octane Fuel: Using gasoline with a lower octane rating than recommended can lead to increased cylinder temperatures, incomplete combustion, reduced power output, engine knocking, and even damage to the vehicle's ignition system.
20
5
Share

Symptoms of a Weak Car Battery?

The symptoms of a weak battery include the inability to start the engine. Before this happens, there may also be signs such as dimming vehicle lights, weak horn sound, sluggish engine cranking, and the battery warning light illuminating on the dashboard. Below are the reasons that can lead to a weak car battery: 1. After the car is turned off, the engine stops running, but the electrical devices or external power equipment continue to be used for an extended period. This practice can harm the battery's lifespan. 2. Forgetting to turn off electrical devices such as headlights, air conditioning, or audio systems after the car is turned off. A weak battery once or twice may not have a significant impact, but frequent deep discharges over time can greatly affect the battery's lifespan.
1
3
Share

What are the body dimensions of the Toyota Highlander?

Different models of the Toyota Highlander have varying body dimensions. Below are the specific details: 1. Highlander 2018 2.0T 2WD Elite 5-seater National VI: The length, width, and height dimensions are 4890mm × 1925mm × 1720mm respectively. The wheelbase is 2790mm. 2. Highlander 2018 2.0T 4WD Knight Edition 7-seater National VI: The length, width, and height dimensions are 4890mm × 1925mm × 1715mm respectively. The wheelbase is 2790mm. 3. Highlander 2018 2.0T 2WD Elite 7-seater National VI: The length, width, and height dimensions are 4890mm × 1925mm × 1720mm respectively. The wheelbase is 2790mm.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.