What are the interior space dimensions of the Wuling Rongguang Extended Version?

What are the effects of delaying an oil change?

Here are the impacts of not changing the oil in time: 1. It will cause the engine noise to increase. 2. It will lead to accelerated wear of internal components. 3. It will reduce the engine's service life. 4. The sealing and cleaning effects will be diminished. Additional information: The method for changing the oil is: 1. Lift the car, remove the underguard, and place a container under the drain plug. 2. Unscrew the drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after draining and wipe it with a tissue to check for leaks. 3. Reinstall the underguard, lower the car, and add oil through the filler port.

20

3

Share

How Long Can a Bulging BMW Run-Flat Tire Last?

If a BMW run-flat tire bulges, it is recommended to replace it immediately as a bulging tire cannot continue to be used. Tires are a crucial component of a vehicle, being the only part that makes direct contact with the road. They play a vital role in the vehicle's driving stability and safety. Tires are made of rubber, and rubber products will age over time with prolonged use. Below are some considerations when purchasing and using tires: 1. When buying tires, always check the production date: Avoid purchasing tires with production dates that are too old. Even if unused, rubber tires will still age. 2. Regularly inspect tire pressure and the tire surface for any damage during daily use: The sidewalls of tires are relatively fragile, and if they are cut or punctured, they cannot be repaired. It is advisable for car owners to replace their tires every four years, even if the mileage driven within that period is low.

14

5

Share

How to Deal with Yellowing Plastic Headlight Covers?

Here are solutions for yellowing plastic headlight covers: 1. Car owners can regularly maintain their vehicles by cleaning dirt and dust from the headlight surfaces. Use a clean soft cloth to wipe them, and you can also prepare soapy water to wash the headlights, which helps remove surface contaminants, oil stains, and other attachments to prevent yellowing. 2. Sand the headlights with sandpaper, then polish them with specialized wax. 3. Apply tape around the edges of the headlights, then sand them with varying grits of sandpaper step by step. Finally, use professional tools to apply a protective film. Additional Information: The reason for yellowing plastic headlight covers is prolonged exposure to sunlight. Modern car headlight covers are made from polycarbonate plastic through compression molding. This type of plastic is sturdy and transparent, but it is also prone to oxidation and aging.

11

2

Share

Which Type of Car Fire Extinguisher is Better?

Due to the less-than-ideal storage conditions for fire extinguishers in vehicles, it is recommended to choose either a dry powder fire extinguisher or a water-based fire extinguisher. According to national regulations, the minimum filling capacity for vehicle fire extinguishers is one kilogram. When purchasing a vehicle fire extinguisher, it is sufficient to choose one with a capacity of 1-3 kilograms. Below are the instructions for using a dry powder fire extinguisher: 1. Before use, shake the extinguisher thoroughly several times to ensure the dry powder inside is loosened. 2. Remove the safety pin, hold the nozzle with your hand (or support the bottom of the bottle if it is a tubeless fire extinguisher), and aim the nozzle at the base of the flame. 3. Press the handle of the extinguisher firmly, and the dry powder will be discharged from the nozzle.

13

1

Share

Is there a penalty for driving with one broken headlight?

Driving with one broken headlight is subject to penalties. According to Article 58, Section 17 of the Road Traffic Safety Regulations, operating a motor vehicle with incomplete safety facilities or components that do not meet technical standards, thereby posing safety hazards, will result in a fine. Below is relevant information about automotive lights: 1. Position lights (also called parking lights): Position lights indicate the width of the vehicle. Similarly, a circle represents the light, and horizontal lines represent the light beams, which spread to both sides. These are typically used during dusk when night is just falling. 2. Front and rear fog lights: A circle represents the light, horizontal lines represent the light beams, and curved lines represent fog. Since fog limits visibility, the symbol shows curved lines blocking the light beams. Light beams in front represent front fog lights, while those at the rear indicate rear fog lights. These are usually used during rain, fog, or snow. In extreme weather conditions, it's best to turn on fog lights rather than hazard warning lights.

13

4

Share

What Brand is the Teana Transmission?

JATCO is the brand of the Teana's transmission. JATCO, known in Chinese as Jiekete or Jiakete, was originally the transmission division of Nissan Motor. It became independent in 1999 as JATCO Transmission Technology Co., Ltd., and later merged with Mitsubishi's transmission division. Currently, it remains under Nissan's control, so it is generally considered a subsidiary of Nissan. The Teana transmission model is XTRONIC CVT. Continuously Variable Transmissions (CVT) do not have specific gears. While they operate similarly to automatic transmissions, the ratio changes are continuous rather than stepped, ensuring smooth and uninterrupted power delivery. The CVT paired with the 2.0T engine offers superior smoothness, aligning with the Teana's family-oriented positioning. When using the Teana's transmission daily, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged intervals can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While some experienced drivers coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating and jerking when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift prematurely to showcase 'smooth' driving, but this can severely damage transmission gears, leading to issues like gear grinding over time. Avoid frequent steep hill climbs in Drive (D). Automatic transmissions may overheat or upshift too early on steep inclines, reducing climbing power. Use manual mode to lock in lower gears or sport mode to protect the transmission. Do not tow the vehicle long distances. If the vehicle breaks down, use a flatbed tow truck with the transmission in Neutral (N). Avoid using tow ropes or dragging the vehicle directly.

4

3

Share

What are the interior space dimensions of the Wuling Rongguang Extended Version?

What are the effects of delaying an oil change?

How Long Can a Bulging BMW Run-Flat Tire Last?

How to Deal with Yellowing Plastic Headlight Covers?

Which Type of Car Fire Extinguisher is Better?

Is there a penalty for driving with one broken headlight?

What Brand is the Teana Transmission?

What is the difference between isooctane and gasoline?

How Long Does It Take to Apply Car Window Tinting at a 4S Shop?

What does H-type engine mean?

Can I Take the Household Register for the Subject 2 Test?