What are the interior functions of the 2007 Odyssey?

1 Answers
DanielaLee
07/29/25 7:06pm
Here is an introduction to the interior functions of the 2007 Odyssey: 1. Electronic Stability Program (ESP): It can be manually turned off in conditions such as rain, snow, or muddy roads. Under normal driving conditions, it helps prevent skidding and fishtailing. 2. Hazard Warning Lights (commonly known as hazard lights): These should be turned on in emergency situations to alert other vehicles and prevent rear-end collisions. 3. Parking Radar/Image: This button activates the panoramic view and radar function, providing audible alerts and visual feedback to help the driver detect obstacles around the vehicle. 4. Auto Hold: This system automatically locks the wheels without requiring the driver to keep their foot on the brake pedal. The electronic parking system will unlock the wheels when the driver presses the accelerator pedal again. 5. Auto Start-Stop: When this function is activated, the engine will temporarily shut off. The vehicle will restart when the driver's foot leaves the brake pedal.
Was this review help?
20
5
Share
More Forum Discussions

Do You Need to Press the Accelerator When Reversing in an Automatic Transmission Car?

When reversing in an automatic transmission car, you do not need to press the accelerator. Simply manage the brake to prevent the car from moving too fast and colliding with other vehicles. Here is an introduction on whether you need to press the accelerator when reversing in an automatic transmission car: 1. An automatic transmission has at least four gears: P, R, N, and D, which stand for Park, Reverse, Neutral, and Drive, respectively. In P and N gears, the power transmission in the gearbox is cut off, and the P gear also locks the output shaft to prevent the car from moving. When shifting from P to any other gear, the car must be completely stopped. Similarly, when shifting from any other gear to P, the car must also be stopped. 2. Since an automatic transmission does not have a clutch, the car will move even without pressing the accelerator after shifting into Drive, with a speed of approximately 15 km/h. Therefore, if you want to move at a very slow speed, you should use the brake to reduce the car's speed.
15
1
Share

What is the 0-100 km/h acceleration time of the Emgrand GS 1.4T?

According to official data, the 0-100 km/h acceleration time of the Emgrand GS 1.4T is 13.13 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque generally represents how strong the force is. The greater the torque, the stronger the force pushing the vehicle, and naturally, the faster the acceleration. The Emgrand GS 1.4T has a maximum torque of 255 N·m, with a 0-100 km/h acceleration time of 13.13 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Emgrand GS 1.4T is equipped with a CVT continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Emgrand GS 1.4T has a power-to-weight ratio of 100 Hp/T, with a 0-100 km/h acceleration time of 13.13 seconds.
5
2
Share

Can China VI Vehicles Use China V Gasoline?

China VI vehicles can use China V gasoline. The government has taken this into consideration, and both Sinopec and PetroChina have made preparations for fuel upgrades. It is expected that fuel meeting the China VI emission standards will be available before the implementation of the China VI standard. Here is some information about gasoline: 1. Gasoline is produced and sold according to its octane rating, which is specified by national gasoline product standards and varies with different standards. Currently, China IV gasoline has three octane ratings: 90, 93, and 97. China V gasoline has ratings of 89, 92, and 95. 2. Gasoline grades are classified by octane number. For example, 97-octane gasoline refers to a fuel with anti-knock performance equivalent to a mixture of 97% isooctane and 3% n-heptane. The higher the octane number, the better the anti-knock performance. Different octane ratings should be selected based on the engine's compression ratio, as specified in each vehicle's manual. Mid-range cars with a compression ratio between 8.5 and 9.5 should generally use 90-octane China IV gasoline, while cars with a compression ratio above 9.5 should use 93-octane China IV gasoline.
18
1
Share

What does D gear mean?

The following two points provide more information about D gear: 1. D gear is the most common gear in automatic transmission models, usually located in the middle-rear position of the gear shift console, behind the N gear, designed to enable the car to automatically select gears when moving forward. 2. D gear belongs to the forward gears, but forward gears are not limited to D gear; they also include M gear, S gear, L gear, and numerically marked restricted gears such as 1st, 2nd, and 3rd gears. Driving gears consist of both forward gears and reverse gears, while the neutral gear corresponds to the driving gears, meaning no gear is engaged, and there is no gear position.
1
0
Share

What is the programming method for Volkswagen dynamic cornering lights?

Volkswagen dynamic cornering light programming method is as follows: 1. Record the previous coding. 2. Recode the control unit, then perform basic settings. The basic settings are performed with the vehicle unloaded and the headlights switched to low beam. 3. Enter the basic settings of the automatic headlight module for coding. 4. Replace with a new control unit. The part number and index number of the new control unit must be exactly the same as the old one. 5. Read the coding of the old control unit. 6. Program the new control unit. Additional information about dynamic cornering lights: 1. Dynamic cornering lights, also known as automatic steering lights, can be called automatic headlights. 2. Dynamic cornering lights are abbreviated as AFS, fully named Automotive Adaptive Front-lighting System or Intelligent Front Lighting System.
7
4
Share

How to reset the overdue Service B reminder on a Mercedes-Benz C200L?

To reset the overdue Service B reminder on a Mercedes-Benz C200L, follow these steps: 1. Turn the ignition to position 1. 2. Simultaneously press and hold the call button and OK button for 5 seconds. 3. After the menu appears, select the ASSTSTPLUS service code. 4. Choose to confirm the complete service package and press the OK button to reset. Additional information about the Mercedes-Benz C200L: 1. The Mercedes-Benz C200L is positioned as a mid-size sedan with a stylish and sporty exterior design. 2. The Mercedes-Benz C200L is equipped with a 2.0T turbocharged engine, delivering a maximum power of 184 horsepower and a maximum torque of 300 Nm. It accelerates from 0-100 km/h in just 7.9 seconds, with a combined fuel consumption of 6.3 L/100km as rated by the MIIT. It is paired with a 9-speed automatic transmission.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.