···
Log in / Register

What are the instructions for using the Roewe i5 function buttons?

4 Answers
LeArya
07/24/25 5:35pm

Roewe i5 function button instructions are as follows: 1. Press the left/right buttons on the right side of the steering wheel to switch between comprehensive information display items, and use the up/down buttons for adjustment; 2. Press the OK button on the right side of the steering wheel to confirm or long-press the OK button to reset; 3. The asterisk button below the steering wheel serves as a shortcut for the main interface and vehicle settings; 4. The button next to the asterisk is the voice recognition function key; 5. The left side of the steering wheel contains buttons for switching songs, muting, and answering calls; 6. The left lever of the steering wheel controls high/low beam and width lights; 7. The right side of the steering wheel houses the windshield wiper switch; 8. Position 0 on the left side of the steering wheel is the initial position for the headlight illumination height adjustment switch, and rotating the adjacent knob can adjust the mirror angle of the exterior rearview mirrors.

Was this review help?
15
0
Share
ZoeyDella
08/10/25 8:12am

I remember when driving the Roewe i5, the layout of the function buttons was quite intuitive and easy to get used to. On the left side of the steering wheel, there are music control buttons: a round knob adjusts the volume, left and right arrows change songs, and they respond immediately with a press. On the right side are the phone buttons—once Bluetooth is connected, answering calls is as simple as a light tap, so you don’t have to fumble while driving. The air conditioning controls are on the center console, with physical knobs to adjust temperature and fan speed, plus a button to switch airflow direction between face and feet. The cruise control buttons are located below the steering wheel—set your speed, and the car maintains it automatically, making highway trips much more effortless. There’s also a mode button to switch driving modes, like Eco or Sport. Overall, these buttons are designed with user-friendliness in mind, ensuring smooth and convenient daily use. I’d suggest new owners start by trying out the steering wheel buttons first, gradually familiarizing themselves to avoid distractions.

Was this review help?
15
0
Share
Expand All
StDante
09/26/25 2:25am

When I first started using the Roewe i5's function buttons, they felt a bit unfamiliar, but I quickly adapted. The rotary knob on the left side of the steering wheel controls the volume with a simple twist, while the side buttons allow for seamless song switching without interrupting playback. On the right side, the phone button enables one-touch answering or rejecting calls after Bluetooth pairing. The central control's air conditioning buttons are intuitive: fan speed adjustment buttons, a temperature knob that turns red or blue to regulate warmth or coolness, and a button to control the internal/external air circulation, which is practical on smoggy days. The one-touch window controls are located on the door panel buttons. The cruise control button is on the right side of the steering wheel, allowing you to set the target speed after learning how to use it. Overall, the button placement is logical, and the operation is smooth without any lag. As a beginner, it took me a few days of practice to become proficient, and now I can focus on the road while the buttons assist in daily driving.

Was this review help?
16
1
Share
Expand All
Virgil
11/09/25 4:28am

From a technological perspective, the function keys of the Roewe i5 optimize the user experience. The steering wheel touch buttons respond quickly and support customization, such as setting navigation shortcuts. The one-touch AUTO button for air conditioning automatically controls temperature and humidity, with direct feedback from physical buttons. Press the voice assistant button once to issue commands for controlling music or making calls. Driver assistance keys like cruise control activate intelligent speed maintenance. The high integration of buttons reduces reliance on the central control screen, ensuring intuitive interaction for driving safety.

Was this review help?
15
4
Share
Expand All
More Forum Discussions

how much is chevy worth

The worth of a Chevy, or any Chevrolet vehicle, is not a single number but a range determined by its specific model, year, condition, mileage, and location. On average, a used Chevrolet is worth between $15,000 and $30,000 , but this can vary dramatically from under $5,000 for an older, high-mileage model to over $70,000 for a well-equipped, late-model Tahoe or Corvette. The most accurate way to find your Chevy's value is to use reputable pricing guides like Kelley Blue Book (KBB) or Edmunds, which analyze real-time market data. Key Factors That Determine a Chevy's Worth: Model and Trim: A base-model Chevy Spark holds a fraction of the value of a Chevrolet Suburban Premier. Desirable trims (like the Z71 for trucks or RS for cars) and options (such as four-wheel drive) significantly increase worth. Year and Mileage: These are the most straightforward factors. Newer models with lower mileage are always worth more. A general rule is an average of 12,000-15,000 miles per year. Condition: This is critical. Vehicles are graded on a scale from "Excellent" to "Poor." A car with a clean history, no accidents, and pristine interior/exterior will command a premium. Vehicle History: A single accident reported on services like Carfax can reduce a car's value by thousands of dollars. A clean title is essential for maximum worth. Market Trends: Gas prices, consumer demand for trucks/SUVs versus sedans, and regional preferences (e.g., 4x4 trucks are worth more in snowy states) all influence the final price. To give you a concrete idea, here's a snapshot of approximate values for different 2020 Chevrolet models in "Good" condition with average mileage: Chevrolet Model Trim Level Approximate Private Party Value (2020 Model) Silverado 1500 LT Double Cab 4x4 $32,500 - $36,000 Equinox LS FWD $18,000 - $20,500 Malibu LT $17,800 - $20,000 Tahoe LT 4x4 $38,000 - $42,000 Traverse LS FWD $23,500 - $26,000 Bolt EV LT $16,000 - $18,500 Camaro 1LT $25,000 - $28,000 Spark 1LT CVT $12,500 - $14,000 For the most precise valuation, input your Vehicle Identification Number (VIN) or your car's exact details into the KBB website. This will provide you with three key numbers: the Trade-in Value (what a dealer might pay), the Private Party Value (a fair price for selling to another individual), and the Retail Value (what you'd pay at a dealership).
2
1
Share

how old for no car seat

The age at which a child can stop using a car seat is not a simple number; it is governed by state laws based on height and weight. Generally, most children need a booster seat until they are at least 4 feet 9 inches tall and between 8 and 12 years old. The key is passing the 5-Step Seat Belt Fit Test to ensure the vehicle's adult seat belt rests correctly on their body. Why Height and Weight Matter More Than Age A child's skeletal structure is not fully developed to withstand crash forces like an adult's. A seat belt that rides up on the soft abdomen or cuts across the neck can cause severe internal injuries in a collision. Booster seats "boost" the child up so the lap belt lies snugly across the upper thighs (not the stomach) and the shoulder belt crosses the center of the chest and shoulder (not the neck). The 5-Step Seat Belt Fit Test Before ditching the booster seat, your child must meet all five criteria while sitting all the way back against the vehicle seat: Does the child sit all the way back against the auto seat? Do the child's knees bend comfortably at the edge of the seat? Does the lap belt sit snugly across the upper thighs, not the stomach? Does the shoulder belt cross the center of the chest and shoulder, not the neck? Can the child stay seated like this for the entire trip? If you answer "no" to any of these, the child still needs a booster seat. State Law Variations While the safety principles are universal, the specific legal requirements vary. The table below highlights the diversity of state laws. Always check your local Department of Motor Vehicles (DMV) for the most current regulations. State Minimum Age to Use Seat Belt Only Minimum Height Requirement Minimum Weight Requirement Additional Notes California 8 years old 4'9" 80 lbs Or until the vehicle seat belt fits properly. Texas 8 years old N/A N/A Law requires use of child safety seat until 8 years old or 4'9". New York 8 years old N/A N/A Applies to all children under age 8; they must be in an appropriate child restraint system. Florida 6 years old N/A N/A Law requires child restraint for children through age 5. Pennsylvania 8 years old 4'9" 80 lbs Children under 2 must be in a rear-facing car seat. The safest practice is to keep your child in a booster seat for as long as possible, until they pass the 5-step test, even if they are technically older than your state's minimum age law. Safety should always override a child's desire to graduate early.
11
5
Share

how to block sand a car

Block sanding is a meticulous process used to create a perfectly flat surface on a car's body panels before painting. It involves using a sanding block to evenly remove a thin layer of primer or existing paint. The "block" is crucial because it prevents your fingers from creating uneven pressure points, which would result in waves and low spots. For a professional-quality finish, proper technique is essential. Safety is your first priority. Wear a respirator mask, safety glasses, and nitrile gloves. Work in a well-ventilated, clean area to avoid dust contamination. You'll need a few key tools: Sanding Block: A rigid, long-block sander (around 12-15 inches) is ideal for large, flat panels. Guide Coater: This is a spray-on powder that helps you visualize high and low spots. As you sand, it disappears from high areas but remains in low spots, guiding your work. Sandpaper: Use wet/dry sandpaper designed for automotive use. Starting with too coarse a grit is a common mistake. The process begins after you've applied a coat of primer-surfacer. Spray on the guide coater. Then, using your sanding block, sand in straight, overlapping passes along the length of the panel. Keep the block flat and use a spray bottle to keep the surface lubricated with water; this is called "wet sanding" and it reduces clogging. The goal is to sand until the guide coater is uniformly removed, indicating a flat surface. You'll typically progress through grits, starting with 400 or 600 to remove imperfections and finishing with 800 or 1000 for a smooth base for paint. Sanding Grit Primary Purpose Recommended Use 320 Grit Aggressive material removal, shaping body filler Initial heavy work, not for final primer sanding 400 Grit Removing minor scratches, leveling primer Starting grit for block sanding on rougher surfaces 600 Grit Final leveling of primer, removing 400-grit scratches Standard final grit for most base coats 800 Grit Creating a finer scratch pattern for paint Used for high-solid primers or as a final step 1000 Grit Ultra-fine finish for sensitive paints Often used for clear coat or single-stage paint 1500 Grit Final pre-paint polish preparation Used before applying a polish for a show-quality finish
14
4
Share

how many axles is a car

Most passenger cars have two axles —one front and one rear. This standard configuration supports the vehicle's weight, allows for steering and power transmission, and is why you typically see four wheels on a car. An axle is a central shaft that connects a pair of wheels, and in automotive terms, it's crucial for stability and movement. While two axles are the norm for everyday vehicles like sedans and SUVs, larger vehicles such as trucks or buses can have more for increased load capacity. The number of axles affects a car's performance, including handling, fuel efficiency, and towing capability. For example, a car with two axles is designed for balanced weight distribution, which contributes to smoother rides on paved roads. In contrast, commercial vehicles might add axles to handle heavier loads, complying with road safety regulations. Understanding this helps in making informed decisions about vehicle purchase, especially if you need a car for specific purposes like off-roading or hauling. Here's a quick reference table showing the typical number of axles for various vehicle types, based on industry standards from sources like the Society of Automotive Engineers (SAE): Vehicle Type Typical Number of Axles Common Use Case Sedan 2 Daily commuting SUV 2 Family travel Pickup Truck 2 (or 3 for heavy-duty) Towing and cargo Semi-Truck 3 to 5 Long-haul freight Bus 2 to 3 Public transport Motorcycle 1 Personal mobility Tractor 2 or more Agricultural work Sports Car 2 High-performance driving Minivan 2 Passenger transport Dump Truck 3 or more Construction When considering a car, remember that axle count isn't the only factor—factors like drivetrain (e.g., front-wheel drive vs. all-wheel drive) also play a role. For most drivers, a two-axle car is perfectly sufficient, but if you're venturing into specialized areas, consulting a professional mechanic can provide tailored advice.
13
0
Share

how much junk car worth

The worth of a junk car typically ranges from $100 to $1,000 , but it can be higher for valuable models or if parts are in demand. Key factors include the vehicle's make, model, year, condition, location, and current scrap metal prices. For instance, a common sedan like a 2005 Toyota Camry might fetch $200-$500, while a larger SUV or truck could be worth more due to heavier weight. To get a precise estimate, use online tools or contact local junkyards. Several elements determine your junk car's value. The scrap value is based on weight and the price of recyclable materials like steel and aluminum. If the car has operational parts, such as a working engine or transmission, their salvage value can add to the total. Salvage titles —indicating the car was deemed a total loss by an insurer—often reduce value, but rare models or those with high-demand parts might still command a premium. Always check for catalytic converters , as they contain precious metals and can be worth hundreds alone. Current market trends matter; scrap metal prices fluctuate with global demand. According to industry data from sources like the Automotive Recyclers Association, average junk car values have seen slight increases in recent years due to inflation and supply chain issues. Here's a sample table with estimated values based on vehicle type and condition: Vehicle Type Average Condition Value Poor Condition Value Key Factors Compact Sedan $150 - $400 $50 - $200 Light weight, common parts Full-size SUV $300 - $800 $100 - $400 Heavy, more scrap metal Pickup Truck $400 - $1,000 $150 - $500 High demand for parts Luxury Car $500 - $1,500+ $200 - $700 Valuable components Hybrid/Electric $600 - $2,000 $300 - $1,000 Battery and tech parts To maximize return, remove personal items, gather documentation like the title, and get multiple quotes from reputable buyers. Avoid exaggerating the car's condition—be honest to ensure a fair deal. Remember, environmental factors like rust or damage from accidents will lower the offer. If you're unsure, consult resources like Kelley Blue Book's junk car calculator for a baseline.
18
4
Share

how long a car can last

A well-maintained car can typically last between 8 to 15 years or 150,000 to 300,000 miles, but many vehicles exceed 200,000 miles with proper care. The actual lifespan depends heavily on factors like maintenance habits, driving conditions, and the vehicle's brand reliability. For instance, regular oil changes and timely repairs can significantly extend a car's life, while harsh driving or neglect might shorten it. Industry data from sources like J.D. Power and Consumer Reports shows that some models are known for their longevity due to robust engineering. Maintenance is the biggest factor in how long a car lasts. Following the manufacturer's recommended service schedule for oil changes, brake inspections, and fluid checks can prevent major issues. I always emphasize using high-quality parts and addressing small problems early to avoid costly repairs down the line. Driving habits and environment also play a role. Cars used primarily for highway driving tend to last longer than those in stop-and-go city traffic, as engines experience less wear. Additionally, vehicles in regions with harsh winters or salted roads may face faster corrosion, so rust protection is key. Brand reliability varies widely. Some manufacturers build cars with durability in mind, often reflected in longevity data. Below is a table with average lifespan estimates based on industry reports, highlighting how different models perform under typical conditions. Car Model Average Lifespan (Miles) Notable Strength Toyota Camry 200,000 High reliability ratings Honda Accord 190,000 Fuel-efficient engine longevity Ford F-150 250,000 Durable truck frame Subaru Outback 180,000 All-wheel drive resilience Chevrolet Silverado 220,000 Strong powertrain Lexus ES 230,000 Luxury with low maintenance needs BMW 3 Series 150,000 Performance with higher upkeep Hyundai Sonata 170,000 Good warranty support Nissan Altima 160,000 Balanced cost and lifespan Jeep Wrangler 200,000 Off-road durability To maximize your car's life, stick to a consistent maintenance routine and avoid aggressive driving. I've seen cars last over 20 years when owners are diligent, but it's not a guarantee—every vehicle has its limits based on design and usage.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.