What are the installation requirements for Li Auto charging piles?

1 Answers
PiperAnn
07/30/25 4:35am
Li Auto charging pile installation conditions generally require the wiring to be no less than 4 square millimeters, with multi-strand copper core wires selected. Taking the Li ONE as an example, the following are specific details about the Li ONE: 1. Powertrain: The Li ONE is equipped with a 1.2T turbocharged engine. In terms of the transmission system, it uses a single-speed electric vehicle transmission, with a maximum power of 96 kW and a maximum horsepower of 131 hp. 2. Dimensions: The Li ONE has a body size of 5020 mm in length, 1960 mm in width, and 1760 mm in height, with a wheelbase of 2935 mm. 3. Suspension: The Li ONE features a dual-motor four-wheel drive system. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension, with a unibody structure.
Was this review help?
17
1
Share
More Forum Discussions

How Many Pieces Are There in the Rear Brake Pads?

A set of foot brake rear brake pads consists of 4 pieces, while the hand brake has a separate set of 2 pieces. Function of Brake Pads: Brake pads, as the name suggests, are used for braking. In a car's braking system, brake pads are the most critical safety components. The effectiveness of all braking actions is decisively determined by the brake pads. Good quality brake pads act as protectors for both the driver and the vehicle. Structure of Brake Pads: Brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards. The heat insulation layer is made of non-heat-conductive materials, designed to insulate heat.
8
3
Share

What Causes Car Window Rattling Noises?

Car window rattling noises can be caused by the following reasons: 1. Aging of the window glass sealing rubber strip. Aging rubber strips are the most likely cause of window glass rattling noises. If the noise occurs in a new car, there is no need to immediately replace the rubber strip. Simply purchase a lubricant online, apply it evenly on the rubber strip, and then repeatedly raise and lower the window a few times to see if the noise diminishes. If the rubber strip is severely aged, it is best to replace it directly. 2. Debris in the window glass guide rail. The gaps in the sealing strips of the window slot can easily allow dust and particles to enter during the window raising and lowering process, which can cause rattling noises due to window glass vibration. If dust and particles accumulate over time, they can damage the lifting motor, leading to rattling noises and even affecting the window's raising and lowering function. 3. Loose screws or clips. When driving on bumpy roads, rattling noises from the car window may be caused by loose internal fastening screws or clips of the window glass, including glass fixing screws, lifting guide rail fixing screws, door trim clips, and other internal screws of the door trim.
4
5
Share

Do motorcycles need to follow directional markings?

Motorcycles are classified as motor vehicles and must follow directional markings. Motorcycle traffic regulations: Motorcycles must always keep to the right side of the road under any circumstances, as all motor vehicles are required to drive on the right side. Failing to do so would violate fundamental traffic laws. However, this right-side driving rule refers to vehicle direction and lane regulations, not permission to drive arbitrarily in the right lane. Reasons for motorcycles keeping right: Lane guidance: Urban roads typically have multiple lanes, with vehicles in the right lane generally moving at slower speeds. This arrangement enhances motorcycle safety to some extent and avoids disrupting normal traffic flow for other vehicles. Traffic flow management: Without rules, there would be chaos. Random lane usage would cause congestion, while keeping right improves traffic efficiency and strengthens management.
11
3
Share

What Causes Abnormal Engine Ignition Sounds?

Engine ignition sounds abnormal for the following reasons: Belt Slippage: When starting the car, there is a sharp squealing noise. This squealing sound is caused by belt slippage, which may be due to insufficient tension from the tensioner pulley or the belt being stretched from prolonged use, making it too loose. For a normal belt and tensioner pulley, when you twist the belt slightly with your hand, it should not twist more than 90 degrees. If the belt can be twisted over 90 degrees with little effort, it indicates that the belt or tensioner pulley is loose. Gear Grinding: When starting the car, there is a clicking or grinding noise. This sound is caused by the starter gear grinding against the engine flywheel gear. The reason is that after prolonged and frequent use, the gears on both the starter and flywheel wear down significantly, leading to misalignment and grinding sounds.
1
5
Share

Why is the transmission too hot?

The reasons for transmission overheating are as follows: 1. Dual-clutch transmissions become hot due to the continuous engagement and disengagement of clutch plates; 2. CVT transmissions overheat because of slippage in the steel belt or chain; The functions of a transmission are as follows: 1. To change the gear ratio, expanding the range of torque and speed variation in the driving wheels; 2. To adapt to constantly changing driving conditions, allowing the engine to operate under favorable circumstances; 3. To enable the vehicle to reverse while maintaining the same engine rotation direction; 4. To utilize neutral gear to interrupt power transmission, facilitating gear shifting or power output in the transmission.
7
5
Share

Is it acceptable to transfer vehicle ownership directly without signing an agreement?

Selling a car and transferring ownership directly without signing an agreement is possible, but it can be difficult to resolve any issues that may arise with the vehicle. Vehicle ownership transfer procedures: Vehicle license, vehicle registration certificate, vehicle registration supplementary form (obtained from the local vehicle management office in the jurisdiction where the vehicle is registered, with ID card, vehicle license, and road maintenance fee certificate required for retrieval), vehicle purchase tax certificate, ID cards of both buyer and seller, household register. For non-local residents, a temporary residence permit is required, and the buyer's temporary residence permit must be valid for at least one year. Precautions when selling a car: Vehicle insurance transfer is another crucial point to consider when selling a car. Compared to vehicle ownership transfer, insurance transfer is often overlooked by car owners. If the vehicle ownership is transferred without transferring the insurance, the owner will not be entitled to any compensation in the event of an accident.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.