What are the inspection items for vehicle inspection?
4 Answers
Vehicle inspection items: 1. Check the body surface for scratches or dents; 2. Look for signs of repainting in the engine compartment and edges under the vehicle; 3. Check if the gaps between doors and both sides of the front hood are symmetrical, ensuring there are no excessively large or small gaps; 4. When opening the doors, check the coordination between the key and lock, test if the doors open smoothly without excessive effort, and listen carefully for any noise from the door hinges; 5. Inspect the windshield for integrity and cracks, and verify if the glass is original by checking the markings at the bottom; 6. Check vehicle accessories such as the battery, wipers, engine oil, etc., for signs of aging, and inspect the working conditions of the chassis, wheel hubs, shock absorbers, and suspension.
When it comes to vehicle inspection items, let me break it down comprehensively. When I examine a car, I start with the exterior: check for any scratches or dents on the body, ensure the doors open and close smoothly, and inspect the tire treads for even wear—replace them if severely worn. Test all lighting functions: headlights, brake lights, and turn signals must all illuminate properly. For the interior: pull the seatbelt buckles to test responsiveness, inspect seats and carpets for dirt or damage, and ensure the rearview mirror adjusts easily. Then, under the hood: open the cover to check the oil dipstick—oil level should be normal and not too dark in color, and verify that coolant and brake fluid levels are adequate, not dried up. For the chassis: test the suspension system by pressing down on the car to see if it rebounds quickly, and inspect brake discs for smooth surfaces without rust. Finally, a test drive is crucial: find a flat road to accelerate and listen for smooth engine sounds without unusual noises, ensure brakes respond promptly when pressed, and steering turns flexibly. Make it a habit to check these items monthly to avoid costly major repairs.
For a simple car check, I usually focus on a few key points. First, check if the tire pressure is stable using a pressure gauge; too low pressure can lead to blowouts and increased fuel consumption. Test all the lights by pressing the switches, including fog lights and reverse lights, to ensure they work. Inside the car, pull the seatbelts to see if they latch securely without being loose. For the engine, regularly pull out the dipstick to check the oil level and color—it shouldn't be too dark. Also, ensure the coolant is adequate to prevent overheating in summer. When test driving, find an empty space to check if the acceleration is smooth and the brakes stop the car steadily without shaking. These routine checks can prevent accidents on the highway; just make it a habit to glance over them before heading out.
The basic items I learned for car inspection are divided by areas. The exterior body should be intact without major dents, and all lights should be tested to see if they work. For the interior, seat belts must be tested to ensure they buckle securely, and seats should be checked for tears. Under the hood, check fluid levels: engine oil, brake fluid, and coolant should not be too low or dark in color. Tire tread depth should be at least 3mm for safety. Press down on the body to test the suspension's bounce speed. During a test drive, the engine should sound quiet during acceleration, brakes should have no strange noises, and steering should feel light. Perform these checks monthly, especially before seasonal changes.
