What are the inspection items for motorcycle annual inspection?

Can vehicles undergo annual inspection on Saturdays and Sundays?

Vehicles can undergo annual inspection on Saturdays and Sundays. According to Article 15 of the "Opinions on Strengthening and Improving Motor Vehicle Inspection Work": inspection institutions should implement an uninterrupted system on Saturdays, Sundays, and holidays, providing extended inspection services. However, it should be noted that the annual inspection sticker can only be obtained during working days. Although the inspection companies do not take breaks, the vehicle management offices are closed, and the inspection qualification information needs to be verified on working days before the annual inspection sticker can be issued. Documents required for annual inspection: For individual vehicle annual inspection: original vehicle license, duplicate of compulsory traffic insurance, copy of ID card, and the vehicle. For company vehicle annual inspection: original vehicle license, duplicate of compulsory traffic insurance, copy of the agent's ID card, and the vehicle. Relevant regulations for vehicle annual inspection: Vehicles that fail the annual inspection should be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office should confiscate their license plates and prohibit them from continuing to operate. Vehicles that do not participate in the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.

10

3

Share

Is the A25A engine imported or domestically produced?

The A25A engine is Toyota's TANG 2.5 engine, which is originally imported from Japan. Among Toyota's models, the Camry 2.5L uses the A25A engine, with a maximum power of 154KW, a maximum torque of 250Nm, and a maximum horsepower of 209. For daily maintenance of the A25A engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard being no lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication areas and accelerating engine wear and internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate out, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

6

0

Share

Is ETC Worth Applying For?

ETC is worth applying for, and the benefits of installing ETC include: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel, as vehicles can pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost and wear reduction: Saves money, decreases the frequency of vehicle starts and brakes, reduces wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC more updated, faster, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous. Precautions for using ETC: The ETC transaction sensing range is 8 meters. When the vehicle in front stops, to prevent issues with the front vehicle's ETC device or if it lacks one entirely, maintain a distance of over 10 meters to avoid automatic payment for the front vehicle. The recognized speed for ETC lane passage is 20km/h. Speeding may result in failure to read the vehicle's device information and unsuccessful fee deduction. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will render the electronic tag invalid. It can be taken to the bank where the ETC card was issued or a highway service office for inspection. If the loosening or detachment is not due to human error, reactivation is sufficient. When using a debit card linked to ETC, insufficient balance may cause fee deduction failure. Follow the guidance of on-site staff to proceed to a manual MTC lane and use cash or card payment for passage. Excessively thick car windshields may lead to poor signal reception. This is particularly important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.

5

0

Share

What is the normal tire pressure range for the Nissan Sylphy Classic?

The normal tire pressure range for the Nissan Sylphy Classic is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The Nissan Sylphy Classic is equipped with an indirect tire pressure monitoring system, which does not display the tire pressure value on the dashboard, so the driver cannot view the specific tire pressure value. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the tire pressure gauge against the tire valve to measure and read the value. Remember to replace the valve cap after checking the tire pressure. Generally speaking, a tire pressure exceeding 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates the wear of the central tread pattern, shortening the tire's lifespan; the vehicle's vibration increases, indirectly affecting the lifespan of other components; it causes excessive stretching and deformation of the tire cords, reducing the tire's elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: The friction coefficient with the road surface increases, leading to higher fuel consumption; it makes the steering wheel heavy and prone to deviation, which are factors detrimental to driving safety; it increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling; it reduces the function of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; the friction between the tire and the ground increases exponentially, the tire temperature rises sharply, the tire softens, and its strength drops drastically. If the vehicle is driven at high speed, it may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three reasons: Abnormal tire pressure: It usually triggers an alarm when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. At this time, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure fault light to come on. For sensor damage issues, only a brand-new replacement can be installed.

10

4

Share

What to Do When Nissan Car Keys Are Locked Inside the Car?

Find the spare key of the car to unlock it. Use the car's remote control to unlock it. Contact a professional car unlocking service to unlock it.

17

4

Share

How to deal with oily and blurry car windshield?

Sprinkle a little flour to absorb the oil before wiping. Wipe directly with a towel, and it can be cleaned immediately. Cover the windshield with toilet paper or tissue, then spray with car cleaner.

19

0

Share

What are the inspection items for motorcycle annual inspection?

Can vehicles undergo annual inspection on Saturdays and Sundays?

Is the A25A engine imported or domestically produced?

Is ETC Worth Applying For?

What is the normal tire pressure range for the Nissan Sylphy Classic?

What to Do When Nissan Car Keys Are Locked Inside the Car?

How to deal with oily and blurry car windshield?

What Are the Reasons for an Automatic Transmission Car Not Starting?

How Long Does It Take to Charge a Dead Car Battery by Driving?

How to Use the Handbrake?

What to Do When the Radar on Sagitar Keeps Beeping and the Switch Flashes?