What are the incorrect statements about the role of seat belts?

1 Answers
DiLaura
07/29/25 7:06am
When a vehicle collision occurs, the incorrect statements about the role of seat belts are protecting the neck from injury, reducing driver fatigue, and maintaining the correct driving posture. This is because during a collision, the primary function of seat belts is only to reduce the severity of injuries to the occupants. The role of seat belts: Automotive seat belts are safety devices designed to restrain occupants during a collision, prevent secondary collisions between occupants and the steering wheel or dashboard, and avoid occupants being ejected from the vehicle, which can lead to fatalities or injuries. Automotive seat belts are widely recognized as the most cost-effective and efficient safety devices, and their installation is mandatory in many countries. Precautions: Regularly inspect the condition of seat belts, and replace them promptly if they are damaged. All bolts securing the seat belts to the floor near the seats should be tightened according to regulations, and sealant should be applied around the bolts. The three-point lap belt should be worn as low as possible, around the hips, not the waist.
Was this review help?
11
2
Share
More Forum Discussions

How to Check the Tire Pressure Monitoring in the 2019 Leiling?

Method to check the tire pressure monitoring in the 2019 Leiling: Use the left and right interface information buttons on the steering wheel to select. When the dashboard displays an icon with a vehicle graphic and an exclamation mark, it indicates the tire pressure monitoring. Two methods of tire pressure monitoring: 1. Direct tire pressure monitoring, which uses pressure sensors installed in each tire to directly measure the tire pressure; 2. Indirect tire pressure monitoring, which compares the speed differences between tires to monitor the tire pressure. The 2019 Leiling is a compact car under Toyota, with a body structure of a 4-door, 5-seater sedan. The dimensions are 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm.
9
2
Share

What Causes a Beginner Driver to Stall When Starting the Car?

The reason a beginner driver stalls when starting the car is due to inaccurate control of the clutch and unfamiliarity with the engagement point of the clutch pedal. If the foot moves too quickly from the clutch's free play to the engagement point, the car may stall. When stalling the car, it is necessary to first press the brake, shift to N (neutral), engage the handbrake, shift to P (park), and then turn off the engine before releasing the brake. For manual transmission vehicles, pressing the brake is also required when stalling. The effectiveness of the car's braking depends on the quality of the brake pads, which create friction against the brake discs or drums to achieve deceleration and stopping. The engine's power is transmitted through the transmission, and starting the car requires coordinated interaction between the engine, transmission, and clutch.
11
5
Share

What does 99w on a tire represent?

Tire 99w refers to the load index and speed rating of the tire. The number 99 indicates that the maximum load capacity of a single tire is 775 kilograms, and the letter w represents the tire's maximum speed of 270 kilometers per hour. Other speed ratings include h and v, where h stands for 210 kilometers per hour and v for 240 kilometers per hour. According to international standards, the number of cotton cord layers is used as the basis for indicating the tire's ply rating. Tires with different ply ratings have different load capacities. Even tires of the same specification may have different load capacities due to varying ply ratings. Therefore, tires with different ply ratings should not be used on the same axle, as this could be dangerous when driving at high speeds with a load.
10
1
Share

What Causes Water to Come Out of a Car's Exhaust?

The reason water comes out of a car's exhaust is: After the air-fuel mixture burns, it produces water vapor. When this vapor reaches the car's exhaust pipe, some of it condenses into water droplets, resulting in water dripping from the exhaust pipe, while the rest of the vapor is released into the atmosphere. Water dripping from the car's exhaust pipe is a normal phenomenon, most commonly seen in winter. If you are concerned about this phenomenon, you can first check whether the coolant in the radiator reservoir is low. If the coolant level is normal, this indicates that the car is in good condition and the air-fuel mixture is burning completely. If the radiator frequently runs low on coolant and a large amount of water is discharged, it may be due to a damaged engine cylinder gasket, requiring engine disassembly for repair.
14
2
Share

How to Operate an Automatic Transmission?

Automatic transmission cars are very simple to operate because they do not require the driver to manually shift gears—the car does it automatically. Driving an automatic transmission car does not involve using a clutch to shift gears; the driver only needs to understand the meaning of each gear position. Simply engage the gear, press the accelerator to move, and press the brake to stop. For most models, the car cannot start unless the gear is in the P (Park) or N (Neutral) position, a safety feature designed by manufacturers. Before ignition, you need to press the foot brake. For brief stops, keep the gear in D (Drive) and press the brake for easy restart. For longer stops, shift to N (Neutral) or P (Park) and engage the handbrake. When parking, always engage the handbrake first before shifting to P (Park).
7
1
Share

What Does Exhaust Resonance Feel Like?

Exhaust resonance feels like the vehicle's floor is vibrating, accompanied by a humming sound. Exhaust pipe resonance can significantly affect the comfort of the vehicle. Most factory-installed exhaust pipes do not exhibit resonance; it is typically found in some aftermarket exhaust systems. The exhaust pipe consists of three sections: the header, mid-pipe, and tailpipe. The header is the exhaust manifold, the mid-pipe runs along the chassis, and the tailpipe is located near the rear bumper. Modifying the mid-pipe and tailpipe only changes the sound, while modifying the header can enhance performance. The cause of exhaust resonance is the vibration generated by the engine. Installing bellows in the front and mid-sections of the exhaust system, when properly designed, can effectively reduce most of the exhaust pipe vibrations, but some vibrations may still remain inside the vehicle.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.