What are the impacts of delaying a 6-month maintenance to 10 months?

2 Answers
BethanyLynn
07/24/25 7:54am
Delaying a 6-month maintenance to 10 months generally has no significant impact. The key factor lies in the quality and grade of the engine oil used. High-quality and high-grade oil can extend the oil change interval, while regular oil requires frequent quality checks. Typically, conventional maintenance is performed every 5,000 kilometers or every six months, which mainly involves changing the engine oil, oil filter, and air filter. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. The purpose of car maintenance is to eliminate potential hazards, prevent failures, and extend the service life.
Was this review help?
11
3
Share
LenaRose
08/11/25 3:36am
I drive my child to school every day and pay special attention to safety. Delaying a 6-month maintenance to 10 months carries significant risks. Firstly, the engine oil can expire, becoming thicker and dirtier, which reduces lubrication effectiveness and accelerates wear on engine components. This can also lead to increased noise and potential overheating damage. During maintenance, brake fluid and tire wear should also be checked. Delaying these checks may result in reduced brake sensitivity, insufficient tire tread leading to skidding or blowouts, and an increased risk of accidents on highways. It’s like my neighbor last year who neglected maintenance and nearly had a crash due to brake failure, costing nearly ten thousand in repairs and causing delays. So, timely maintenance isn’t just about keeping the car in good condition—it’s about protecting your family’s lives. I suggest not delaying too long, as hidden dangers accumulate over time. Always pay attention to dashboard warning lights, address issues early, and develop good habits to ensure every trip is safe and worry-free.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

Where is the Cabin Air Filter Located in Changan Alsvin?

Changan Alsvin's cabin air filter is located above the glove compartment on the driver's side. Here are the steps to locate it: 1. First remove the plastic panel. 2. Use tools to unscrew the bolts at the end of the glove compartment. 3. Remove the cover plate to reveal the cabin air filter. Below are extended instructions for replacing the air filter: 1. After opening the engine hood, locate a black box in the engine compartment. 2. Open this box to see the air filter, then remove the old one and install the new one. 3. When installing the new air filter, pay attention to distinguish the front and back sides.
20
3
Share

Where is the Corolla Fuel Pump Fuse Located?

Here is the location of the Corolla fuel pump fuse: 1. The turn signal fuse and ACC wire are both located under the steering wheel. 2. The ACC wire is in a rectangular plug, which is black with yellow. 3. The turn signal fuse is in the adjacent socket, which is blue with yellow and blue with red. Below is some additional information about fuses: 1. The function of a fuse is to protect the circuit (wiring) and electrical equipment. 2. An automotive fuse is a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will blow within seconds, thereby protecting the circuit. 3. Fuses are commonly used for overcurrent protection in automotive circuits and are also used for overcurrent protection in industrial equipment.
14
4
Share

How to Set Volvo Seat Memory?

Volvo seat memory setting method: 1. The seat memory function is located in the driver's position. Using the memory function, two different settings can be stored. The memory function buttons are located on one or both front doors; 2. After storing the position to the selected memory button, an audible signal will sound and the indicator light inside the M button will turn off. If no memory button is pressed within three seconds, the M button will turn off and no storage will be performed. The seat must be readjusted before setting a new memory position; 3. After ignition is started, ensure the car is in an operational state, then adjust the seat to your comfortable or desired preset position. Press the SET button on the door panel and hold for about 3 seconds. The SET light will illuminate. Select storage position 1 or 2, and upon hearing a "beep" sound, the seat position will be memorized.
15
1
Share

Where to Apply for a Lost Driver's License and What Materials Are Needed?

Prepare the following materials and go to the vehicle management office for reissuance. Below is an introduction to the relevant content for reissuing a driver's license: 1. Required materials: The original and a copy of the motor vehicle driver's ID card. If the driver's license is damaged, the original motor vehicle driver's license must be brought; if the driver's license is lost, a written statement of the loss of the motor vehicle driver's license is required; a one-inch bareheaded photo of the motor vehicle driver with a white background. 2. Notes: If all materials meet the regulations, the information will be recorded, and a fee for the reissuance is required, with prices varying in different locations. After 3 days, the driver can go to the processing window with the original ID card and payment receipt to collect the new driver's license.
19
5
Share

What is the actual measured ground clearance of the Volkswagen Teramont?

The actual measured ground clearance of the Volkswagen Teramont under full load is 160mm. Below the front bumper assembly, there is an ABS protective plate with a lower edge, providing an unloaded ground clearance of 190mm. Here is some related information about the Teramont: 1. In terms of the chassis, the Teramont features a unibody construction with MacPherson front suspension and an E-type multi-link rear suspension. It is equipped with a BorgWarner on-demand all-wheel-drive system and a multi-plate clutch differential lock. 2. The powertrain at the front of the vehicle uses a semi-frame subframe, which is typical of the MQB platform. However, using a semi-frame subframe on a large SUV like the Teramont appears somewhat lightweight.
15
1
Share

Will Reversing at a Traffic Light Intersection Be Captured by Cameras?

Reversing at a traffic light intersection will definitely be captured by cameras, as it constitutes a traffic violation. Below are relevant details: 1. Traffic lights: Traffic signal lights are devices that direct traffic flow, typically consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. 2. Classification: Traffic signal lights are categorized into: motor vehicle signal lights, non-motor vehicle signal lights, pedestrian crossing signal lights, directional indicator lights (arrow signal lights), lane signal lights, flashing warning signal lights, and railway crossing signal lights.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.