What are the high-end features of the Baojun E200?

How often should Idemitsu full synthetic oil be changed?

Idemitsu's original 0w20 super full synthetic oil used by the dealership recommends maintenance and replacement every 5,000 kilometers. Benefits of full synthetic oil: 1. Wider temperature range: Full synthetic oil has a broader temperature range compared to semi-synthetic and mineral oils. 2. Longer lifespan: Synthetic oil is less prone to deterioration, has lower evaporation loss, and lasts longer than conventional oil. 3. Stability: It offers excellent chemical stability, good radiation resistance, high oil film strength, minimal foaming, superior lubrication, and reduced wear. 4. Less thermal degradation: Full synthetic oil experiences less thermal degradation, saves fuel, and provides better engine protection.

3

5

Share

What type of engine oil is used in the Sylphy?

According to the official maintenance recommendations provided by Nissan, the Sylphy should use 5W30 engine oil of SL grade or higher. It is advisable to use the original manufacturer's oil of this specification. As a mechanical device, an engine shares common requirements for lubricating oil with general machinery, such as the need for appropriate viscosity, as well as certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature performance requirements. However, an engine is also a special type of machinery, and its requirements for lubricating oil have unique aspects. Below is an introduction to the specific characteristics of engines: 1. The general requirements for an engine are small size, lightweight, compact structure, and high power output. As a result, the load on its friction surfaces is significant. 2. High-temperature and high-pressure combustion gases in the combustion chamber can leak into the crankcase through the gaps between the piston, piston rings, and cylinder liner. These combustion gases are the result of complete or incomplete combustion of fuel and a small amount of lubricating oil, producing gases and certain particulate matter (soot), which typically become the main components of crankcase blow-by. These gases can contaminate the lubricating oil and, under certain conditions, accelerate its oxidation. 3. The temperature difference between when the engine is stopped and when it is running for an extended period is substantial. Additionally, due to the thermal expansion and deformation of components, it is difficult to maintain consistent gaps in some friction pairs. This can lead to issues such as adhesion and sintering if the gap is too small, or impact and vibration damage if the gap is too large. In these situations, the oil film struggles to adhere. 4. An engine contains various friction pairs, such as pistons and cylinder liners, crankshaft journals and bearings, camshafts and followers, and gears. Although their lubrication requirements differ, only one type of lubricating oil can be used in a single engine (with the exception of large marine diesel engines). Therefore, when selecting lubricating oil, it is necessary to consider multiple lubrication conditions.

19

3

Share

What Does Tire Ply Rating Mean?

Tire ply rating is a concept of strength. The ply rating of a tire represents the nominal number of layers of cord fabric within the tire rubber, which does not completely match the actual number of cord layers, but serves as an important indicator of tire strength. A 1-ply rating represents the strength of one layer of cotton cord. The higher the ply rating, the greater the strength. Additional information: Methods to identify tire quality: 1. Observe the tread pattern, color, and gloss: If the tire is a poor-quality retread, the processing will be non-standard, resulting in shallower tread grooves. 2. Color: Poor-quality tires often appear very bright in color, while regular tires tend to have a relatively darker color. 3. Tread and sidewall joint areas: Poor-quality tires may have missing or incomplete markings on the sidewalls. Wear marks may still remain in the anti-slip grooves of the tread.

17

2

Share

How many points will be deducted for not wearing a seatbelt while making a phone call?

When driving on highways, the driver will be fined and deducted 2 points for not wearing a seatbelt as required; when driving on roads other than highways, the driver will be fined for not wearing a seatbelt as required. The "Road Traffic Safety Law of the People's Republic of China" is a law on road traffic safety promulgated on October 28, 2003, and revised twice in 2007 and 2011. Penalties for drivers not wearing seatbelts: 1. When driving on highways: the driver will be fined and deducted 2 points for not wearing a seatbelt as required; 2. When driving on urban expressways: the driver will be fined and deducted 2 points for not wearing a seatbelt as required; 3. When driving on roads other than highways or urban expressways: the driver will be fined for not wearing a seatbelt as required, but no points will be deducted.

15

4

Share

Can I Change Lanes to Either Side?

It depends on the road conditions. Here are some relevant tips for driving motor vehicles: 1. Precautions: Avoid braking suddenly during a tire blowout. Try to keep the vehicle moving straight. Maintain sufficient speed to control the vehicle, then gently lift your foot off the accelerator and steer slightly toward the side of the blown tire. Eventually, the deflated tire will gradually bring the vehicle to a stop. The parking brake may fail if unused for a long time. The parking brake uses a steel cable to hold the vehicle in place, but the cable can rust and corrode, especially if not used regularly, leading to brake failure. 2. Techniques: Turn on headlights during traffic jams. Research shows that using headlights can reduce the chance of accidents by 32%.

12

0

Share

What is Vehicle Testing?

Vehicle testing refers to conducting tests on selected routes. Below is the relevant content introduction: 1. Two types: There are two types of vehicle testing: one is CW testing, which involves setting up a transmitting antenna in a typical area to emit a single-carrier signal, then conducting vehicle testing on a pre-determined route, using an onboard receiver to receive and record the signal field strength at various locations; the other is live network testing, which involves collecting and recording the pilot signal power data of various base stations in an already operational CDMA network through an onboard test mobile phone. 2. CW testing: CW testing offers convenience in frequency and environmental selection, and it is an omnidirectional single-carrier test, making it easier to avoid test errors caused by other radio wave interference and differences in antenna gain. The accuracy of the collected data is well guaranteed, especially suitable for localized predictions of the propagation environment in the early stages of network construction. The propagation model correction results based on CW testing can provide more accurate propagation predictions for network planning.

12

5

Share

What are the high-end features of the Baojun E200?

How often should Idemitsu full synthetic oil be changed?

What type of engine oil is used in the Sylphy?

What Does Tire Ply Rating Mean?

How many points will be deducted for not wearing a seatbelt while making a phone call?

Can I Change Lanes to Either Side?

What is Vehicle Testing?

How to Check the Vehicle Manufacturing Date?

How long after buying a car can you get license plates?

What is the difference between Geely BMA and CMA?

What is the actual fuel consumption of the 10th generation Accord?