What are the hidden functions of the Roewe RX5 key?

1 Answers
OVivienne
07/30/25 12:36am
The Roewe RX5 smart key features keyless entry, remote locking or unlocking, remote car finding, remote window raising, remote trunk or tailgate opening, and also contains a hidden traditional mechanical key inside. The specific functions of the key are as follows: 1. Locking the car: Press the "Lock" button, and all door lock motors will perform a locking action simultaneously, with the turn signal flashing once. 2. Finding the car: When the vehicle is in anti-theft mode, press the "Find Car" button, and you will hear a long beep with the turn signals flashing for 15 seconds. (Use this function to locate your vehicle when you cannot confirm its position.) Press the "Find Car" button again during the finding state to re-enter the finding mode. 3. Alarm deactivation: When the vehicle is in the alarm activation state of anti-theft mode, press the "Lock" button, and regardless of whether the door locks are opened, all door lock motors will perform a locking action simultaneously, and the alarm will be deactivated. The vehicle will still remain in anti-theft mode. 4. Unlocking: Press the "Unlock" button, and all doors of the Roewe RX5 will perform an unlocking action simultaneously, with the turn signal flashing twice. If the vehicle is in anti-theft mode when this button is pressed to unlock, the turn signal will flash three times. When the key is in the ignition switch, the "Unlock" button cannot be used to unlock. However, if the vehicle is in the alarm activation state of anti-theft mode, inserting the key into the ignition switch and pressing the "Unlock" button can exit the anti-theft state and open all doors. 5. Canceling the anti-theft state: When the vehicle is in anti-theft mode (including anti-theft alarm activation), press the "Unlock" button, and all doors will perform an unlocking action simultaneously, with the turn signal flashing three times, and the anti-theft state will be canceled. 6. Trunk opening: Press and hold for more than 3 seconds until you hear a click, then the trunk will unlock, and all car doors will also unlock. After closing the trunk, the doors will automatically lock.
Was this review help?
6
0
Share
More Forum Discussions

What engine does Das Auto use?

Das Auto models use engines sourced from Shenyang Aerospace Mitsubishi, primarily small-displacement turbocharged engines. Here is relevant information about turbocharged engines: 1. Turbocharging technology can enhance engine power without increasing engine displacement. 2. Turbocharging technology can increase engine air intake without raising displacement, thereby boosting power. 3. The principle of turbocharging technology is straightforward: a turbocharged engine features a turbocharger, which consists of two components - a compression turbine and an exhaust turbine. 4. The compression turbine and exhaust turbine are connected coaxially, with the compression turbine linked to the intake manifold and the exhaust turbine connected to the exhaust manifold.
12
5
Share

What Causes the BMW X3 Particulate Filter to Clog?

BMW X3 particulate filter clogging can be caused by particulate filter malfunction or poor fuel quality. Particulate filter malfunction: You can try revving the engine while stationary to burn off impurities in the particulate filter. If the particulate filter is damaged, the catalytic converter needs to be replaced, which is done free of charge at authorized 4S dealerships. Poor fuel quality: If low-quality fuel is used, incomplete combustion occurs, leading to increased particulate emissions that clog the particulate filter. Switching to higher-quality fuel can resolve this issue. The treatment methods for diesel and gasoline vehicle particulate filter clogging differ as follows: For diesel vehicles: Simply press the regeneration button in the car. The engine will then increase RPM while stationary, typically taking about ten minutes to clean the particulate filter and resolve the clogging issue. For gasoline vehicles: The driver should first shift the car into S mode, then drive at high speed for a period. During high-speed driving, the exhaust pipe temperature rises, burning off the clogged particles in the particulate filter, thereby solving the blockage. If the particulate filter clogging is particularly severe and the above methods don't work, the filter can be taken to an auto repair shop or 4S dealership for professional cleaning with specialized equipment.
1
1
Share

What is gear slippage?

Automotive gear slippage primarily occurs due to wear, looseness, damage of transmission components, or improper adjustment of mating clearances. Below are potential causes of gear slippage: 1. Worn, loose, fractured, or missing shift lever locating pins, causing loss of control and random swinging. 2. Corrosion failure of the gearshift fork shaft interlock mechanism; excessive wear and looseness of the shift lever ball head. 3. Conical wear of gears, gear rings, or gear sleeves along the tooth length direction, leading to disengagement under axial forces generated during operation. 4. Excessive corrosion of shift fork shaft grooves, locking pins, etc.; bent or deformed shift forks, or excessive wear between working surfaces and gear ring grooves. 5. Loosening of the rear fixing nut on the secondary shaft, causing axial movement. 6. Loose or disassembled synchronizer locking pins, resulting in cone surface failure.
6
3
Share

How many hours does it take to fully charge a car battery?

A depleted car battery typically takes about 4 hours of driving to fully recharge. Here is relevant information: 1. The alternator in a car needs to operate at over 2000 RPM to reach full load capacity, at which point its power generation meets the standard value indicated on the nameplate. However, it is generally not recommended to use the car's alternator to charge a completely dead battery. 2. Some older car models do not support automatic power cut-off after the engine is turned off, so it is necessary to manually turn off the headlights and interior reading lights before shutting down the engine. If you need to find something in the car or require lighting, you can use a mobile phone or flashlight to avoid forgetting to turn off the reading light, which could lead to battery drain.
14
3
Share

Does Replacing a Car Windshield Have Any Impact?

Properly replacing the windshield actually has no impact. However, if the installation is not done correctly, the adhesive on both sides of the windshield may not bond tightly with the glass, which can affect the vehicle. Here is some relevant information: 1. There are generally two reasons for replacing the windshield: one is scratches on the glass that obstruct visibility, and the other is damage points that compromise safety. 2. There are usually two concerns when replacing the windshield: first, the quality of the replacement glass may not match the original, and second, there may be sealing issues. It is recommended to first consult a professional auto repair shop to determine if the problem can be resolved through windshield repair. If repair is not possible, try to find a large-scale shop or a professional glass supplier for the replacement.
4
3
Share

How to Turn Off the Auto Start-Stop Technology in a Car?

The method to turn off the auto start-stop technology in a car is: 1. Press the brake pedal while the vehicle is in normal operation; 2. The auto start-stop system will then activate, and the indicator light on the dashboard will illuminate; 3. Press the "off" button for the auto start-stop system; 4. The dashboard will display that it has been turned off, indicating the auto start-stop is deactivated. The engine auto start-stop system automatically shuts off the engine when the vehicle is temporarily stopped, such as at a red light or when pulling over, and automatically restarts when it's time to move forward again. This system helps avoid engine idling when the vehicle is not in motion, thereby saving fuel.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.