What are the hidden functions of the Audi A4L key?

1 Answers
AubreyRose
07/29/25 10:49am
Audi A4L key hidden functions include: window lift, unlocking the driver's door, opening the trunk, using the mechanical key to open the door when the battery is dead, and locating the car. The Audi A4L body dimensions are: length 4858 mm, width 1847 mm, height 1439 mm, wheelbase 2908 mm, fuel tank capacity 56 liters, and trunk capacity 424 liters. The Audi A4L is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 150 hp, maximum power of 140 kW, maximum power speed of 4200 to 6000 rpm, and is paired with a dual-clutch transmission.
Was this review help?
8
0
Share
More Forum Discussions

What is the 0-100 km/h acceleration time for the Ford Mustang?

Ford Mustang 2.3T achieves 0-100 km/h in 5.5 seconds, while the 5.0L version completes it in 4.76 seconds. The Ford Mustang inherits the Mustang family's highly recognizable long hood, low roof, and short rear deck sporty posture, featuring classic design elements such as the aggressive shark-nose front fascia and triple-bar taillights. Below are relevant details about the Ford Mustang: 1. The Mustang is equipped with either a 2.3T or 5.0L engine. The 2.3T Ford Mustang delivers a maximum horsepower of 299 HP and peak torque of 434 N·m, paired with exclusive 19-inch alloy wheels and Pirelli performance tires that offer both formidable looks and exceptional grip. Additionally, it features a new four-wheel independent suspension system and upgraded braking for superior dynamic performance. 2. The Ford Mustang GT has a recalibrated 5.0-liter V8 engine producing 466 HP and 556 N·m of torque. It comes with a set of new Michelin Pilot Sport 4S tires and is mated to a 10-speed SelectShift automatic transmission.
7
2
Share

How to Calibrate the Tire Pressure Sensor on the Trumpchi GA6?

To calibrate the tire pressure sensor on the Trumpchi GA6, follow these steps: Select the system, choose TPMS, read the fault codes, read the data stream, select special functions, click continue, choose tire pressure sensor calibration, turn on the ignition without starting the engine, click confirm to recalibrate, activate to obtain the sensor ID, check the removed left rear tire pressure sensor, note the ID printed on the sensor, input the IDs of all four tire pressure sensors, and the tire pressure sensor calibration will be successful. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: An alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires should be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, the tire pressure warning light will illuminate. If the sensor is damaged, it must be replaced with a new one.
4
0
Share

What to do if the Southeast DX7 electronic handbrake won't release?

The solutions for the Southeast DX7 electronic handbrake not releasing are as follows: 1. First, turn off the start button and wait for about 10 seconds. 2. Press the start button again to restart and hold down the foot brake pedal. 3. Then press and hold the handbrake button (EPB) to check if it can be released. 4. If it cannot be released, try repeating the operation several times. If it still cannot be released, you can contact the 4S store for assistance. The main reasons why the electronic handbrake cannot be released include the following: 1. Fault in the electronic handbrake motor or related circuits. 2. Stuck electronic handbrake cable. 3. Poor return of the parking brake pad components. 4. Abnormal wear gap in the parking brake pads.
14
2
Share

Can the vehicle be transferred if the nameplate is damaged?

Vehicle transfer cannot be processed if the nameplate is damaged. More information about the vehicle nameplate is as follows: 1. The vehicle nameplate is a label indicating the basic characteristics of the vehicle. Its main contents include the vehicle model, engine model, engine displacement, engine rated power, vehicle identification number, total mass, load capacity or passenger capacity, factory serial number, manufacturing date, manufacturing country, and manufacturer name. 2. The manufacturing date of the vehicle can be confirmed by checking the vehicle nameplate. The vehicle must be equipped with a product nameplate, placed in an easily observable position at the front of the vehicle. For buses, the nameplate is placed above the front passenger door inside the vehicle.
1
0
Share

How to Check Why the Wuling Hongguang Electric Fan is Not Working?

The reasons why the Wuling Hongguang electric fan is not working are as follows: 1. Poor motor lubrication—if the fan does not rotate, it may be due to insufficient lubrication of the motor, making it difficult for the motor to drive the fan blades after installation; 2. Motor overheating—overheating can reduce the motor's load-bearing capacity and effective power, preventing it from driving the load; 3. Reduced starting capacitor capacity—a decrease in capacitor capacity can lower the motor's starting torque, making it unable to drive the load; 4. Prolonged motor usage—over time, the motor may wear out, and the shaft sleeve may become damaged, increasing the risk of burning out. Long-term use can also increase the motor's internal resistance, reducing its load-bearing capacity and preventing it from rotating the fan blades.
15
5
Share

What is the difference between the CHR Kuraku and Kuyue?

CHR Kuraku and Kuyue have the same guide price and configuration, with only slight differences in appearance. The Kuraku version features more aggressive wheel arches and front bumper styling to cater to different consumer aesthetics. The configurations of the CHR Kuraku and Kuyue versions are as follows: 1. The body dimensions are 4405*1795*1565mm, equipped with a 2.0-liter four-cylinder naturally aspirated engine, and all models come with a CVT continuously variable transmission (simulating 10 gears). 2. The maximum horsepower is 171 hp, the maximum power is 126 kW, the maximum torque is 203 N·m, and the top speed is 187 km/h.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.