What are the hidden features of the Roewe i5?

Does driving an automatic transmission new car up a steep slope damage the car?

During the break-in period of an automatic transmission new car, it is essential to avoid high-speed driving and long-distance fully loaded driving, and not to let the engine's rotational speed get too high, preferably not exceeding 3000 RPM. Otherwise, it may cause carbon buildup in the engine, which can make the car difficult to start, result in poor acceleration, and increase fuel consumption. Precautions for the break-in period of a new car include: 1. Warm up the car before starting: wait 5 to 10 seconds after shifting into second gear before starting; 2. Avoid high-speed driving: new cars have speed limits during the break-in period, with domestic cars limited to 40 to 70 kilometers per hour and imported cars limited to 100 kilometers per hour; 3. Avoid overloading: carrying too much weight in a new car during the break-in period can damage mechanical components; 4. Avoid removing the speed limiter prematurely: the speed limiter is a throttle device installed between the carburetor and the intake pipe, and owners should not remove it too early but wait until after driving 1000 kilometers; 5. Avoid changing oil too early: the oil initially used in the car is specifically for the break-in period, featuring low viscosity, good heat dissipation, and excellent oxidation resistance; 6. Do not perform emergency braking: emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine.

1

5

Share

Can You Make a U-Turn in a Left-Turn Lane?

Some left-turn lanes allow U-turns while others do not, primarily determined by the signage at the intersection. If there is a dashed line between the left-turn stop line and the crosswalk, you may turn left early, but whether you can turn left on a red light depends on the presence of guardrails or green islands. U-turn rules at traffic lights: 1. No U-turns are allowed if there is no left-turn lane before the traffic light; 2. U-turns are not permitted on the crosswalk at a traffic light; you must pass the crosswalk before making a U-turn; 3. If there is a clear sign prohibiting U-turns or left turns at the traffic light intersection, U-turns are not allowed at any time; 4. U-turns are not permitted if the center line of the road at the traffic light intersection is a double solid yellow line; if it is a double yellow line, vehicles on the dashed side can make a U-turn, while vehicles on the solid side cannot; 5. If there is a yellow grid line at the traffic light intersection, U-turns are allowed, but vehicles must not stop on the yellow grid line; 6. If there is a U-turn sign or a U-turn signal, you must wait for the green light before making a U-turn; 7. If there is no U-turn signal but there is a left-turn signal, you must wait for the green light in the left-turn lane before making a U-turn.

18

3

Share

How to Check the Recommended Tire Pressure?

During the use of a vehicle, tire pressure is extremely important. Below is a detailed introduction on how to check the standard tire pressure: 1. Vehicle Owner's Manual: The standard tire pressure is usually stated in the vehicle owner's manual. 2. Label near the driver's door: Specifically, the label near the B-pillar. 3. Next to the driver's seat: Check the drawer next to the driver's seat. 4. Fuel tank cap door: You can also find it on the fuel tank cap door. 5. Passenger car tire pressure: Look near the door pillar or on the fuel tank cover, or check the side of the front passenger door. Different vehicle models have different weights and tires. Generally, the front and rear tires have different recommended pressures.

17

4

Share

What font is used on the vehicle license?

The font used on the vehicle license is a specialized font designed and developed by the Software Center of the Ministry of Public Security's Science and Technology Research Institute. It contains multiple anti-counterfeiting features and is protected by law. Any software that imitates this font for input is considered illegal, and there is no input method for this type of font among common fonts. The content on the new version of the vehicle license is printed using a specialized printer model Dpk9500GA, which is exclusively used by public security authorities. Arabic numerals printed by other models of printers will have slight differences compared to those printed by the specialized printer, and the anti-counterfeiting features of the Arabic numerals are an important characteristic for identifying the authenticity of the new version of the vehicle license. Composition: The vehicle license consists of three parts: the document, the main page, and the supplementary page. The front side of the main page contains the signed core of the document, while the back side features a photo of the vehicle, sealed in a plastic cover. The supplementary page contains the signed core of the document. Function: Possessing the 'Motor Vehicle License' is one of the prerequisites for a vehicle to be driven on the road. Driving without the license is a violation of regulations. The 'Owner's Name' field on the 'Motor Vehicle License' is not just a matter of name; the registered owner on the license is the legally recognized owner of the vehicle.

4

Share

What does ABS system malfunction mean?

Common ABS malfunctions and their causes are as follows: Malfunction 1: ABS warning light stays on constantly Cause 1: The ABS wheel speed sensor's sensing part is covered by mud, slurry or other contaminants, affecting the sensor's ability to detect corresponding vehicle speed signals Cause 2: Loose connections in system wiring or poor contact in ABS relays causing signal issues that lead to system failure. Malfunction 2: ABS warning light intermittently illuminates, but turns off during acceleration Cause: When multiple vehicle electrical devices are used, battery voltage drops below 10.5V. As engine speed increases and voltage rises, the ABS indicator turns off. The ABS system power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Malfunction 3: ABS warning light stays on after engine start until engine is turned off Cause 1: Poor grounding connection in ABS hydraulic valve body; Cause 2: Poor electrical connector contact in ABS hydraulic valve body; Cause 3: ABS computer malfunction. Malfunction 4: ABS warning light illuminates during high-speed driving Cause: During high-speed driving, the ABS computer detects too large a difference between rear wheel speed and front wheel speed; Incorrect tire specifications or incorrect wheel rim specifications.

8

0

Share

What is the fault when the Audi A4L fuel tank cannot be locked?

Fault Diagnosis: (1) Use VAS5052 for fault navigation inspection, and no fault records are found in the 46 address code comfort system control unit. (2) Perform actuator diagnosis inspection. The fuel tank lock can be unlocked normally. After the central door lock is locked, the fuel tank lock can still be pressed down and unlocked. (3) Check that the fuel tank lock pump is accurately installed in the standard position on the right rear fender, with no offset or movement. After removing the fuel tank lock separately, the fuel tank lock can be locked normally. (4) After detailed inquiry, it was learned that the faulty vehicle had previously undergone sheet metal and paint repair in the right rear fender area. After the repair, the vehicle continued to be used for a period of time, and the user discovered that the fuel tank lock could not be locked normally when refueling. (5) Query the relevant content in the EISAWIN system repair manual and find that the normal disassembly and assembly steps indicate that the fuel tank lock emergency cable must be removed together with the fuel tank lock. (6) Review the company's sheet metal repair technician. During this disassembly of the fuel tank lock, the fuel tank lock was removed separately, and the emergency cable and fuel tank lock were reinstalled. (7) Carefully inspect the assembly relationship between the emergency cable and the fuel tank lock. It is found that the width of both ends of the cable is not completely consistent, and attention should be paid to the different installation positions during assembly.

2

0

Share

What are the hidden features of the Roewe i5?

Does driving an automatic transmission new car up a steep slope damage the car?

Can You Make a U-Turn in a Left-Turn Lane?

How to Check the Recommended Tire Pressure?

What font is used on the vehicle license?

What does ABS system malfunction mean?

What is the fault when the Audi A4L fuel tank cannot be locked?

What time does the first session of Subject 1 start in Tianmen

What Are the Five Major Assemblies in Vehicle Scrapping

How Long is the First Maintenance Required for a New Car?

How far can a Chaowei 48V 20Ah battery run?