···
Log in / Register

What are the hidden features of the Hongqi HS5?

3 Answers
StHaley
09/05/25 6:42am
The hidden features of the Hongqi HS5 include central control for the head-up display, instrument panel reset, and electric tailgate, among others. Below are the specific details of the Hongqi HS5: 1. Vehicle Positioning: The Hongqi HS5 is a sedan. It has a wheelbase of 2875 mm, with length, width, and height dimensions of 4945 mm, 1845 mm, and 1470 mm, respectively. 2. Powertrain: The vehicle is equipped with a 1.8-liter turbocharged engine across all variants, coded as CA4GC18TD-11. This 1.8-liter turbocharged engine delivers 180 horsepower and a maximum torque of 250 Nm. It features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. The engine is paired with a 6-speed automatic transmission from Aisin. 3. Suspension: The front suspension of the Hongqi HS5 uses a MacPherson independent setup, while the rear suspension employs a multi-link independent configuration.
Was this review help?
3
5
Share
StevenDella
09/17/25 7:00am
I've been driving the Hongqi HS5 for almost two years now and have discovered many practical little features that aren't advertised. For example, holding down the lock button on the key fob for five seconds when locking the car can automatically raise all windows including the sunroof, preventing you from forgetting to close them and getting caught in the rain. The remote start for the air conditioning is absolutely magical - just a tap on the mobile app and the car starts cooling or heating in advance. Hidden in the lighting settings is a 'home lighting' mode where the headlights stay on for dozens of seconds after parking, illuminating your walk to the building entrance. The rear seats even have smart heating logic that only activates when it detects someone sitting there, being both intelligent and energy-saving. These details might seem insignificant at first, but after prolonged use they feel quite thoughtful, making daily driving more convenient and comfortable.
Was this review help?
17
1
Share
Expand All
RileyFitz
10/31/25 7:29am
As a safety-conscious car owner, I'm quite satisfied with some of the hidden configurations in the Hongqi HS5. Lightly tapping the turn signal three times automatically flashes it for five seconds, facilitating quick lane changes to alert vehicles behind. The rain-sensing wipers are linked with the automatic headlights during rain, immediately improving visibility in heavy downpours. The driver's seat features a one-touch folding mirror function, reducing worries when passing through narrow roads. I also discovered the emergency braking hazard light activation feature – if you slam on the brakes, the hazard lights flash rapidly to warn following vehicles. The trunk even comes with an emergency release handle, allowing escape if trapped inside. These designs are tucked away in system settings but can be lifesavers in critical moments.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.