What are the hidden features of the Fista Smart Speed Edition?

1 Answers
KaiAnn
07/30/25 2:02am
The hidden features of the Fista Smart Speed Edition mainly include: cruise control function, electric adjustment function for the driver's seat, voice recognition control system, GPS navigation function for car networking, tire pressure monitoring function, automatic trunk opening by induction, and heating function for the exterior rearview mirrors. The Fista is a compact sedan under Hyundai, equipped with two engines: a 1.6-liter turbocharged engine and a 1.4-liter turbocharged engine. The 1.4-liter turbocharged engine has a maximum torque of 140 horsepower and 242 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque between 1500 to 3200 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. The 1.6-liter turbocharged engine has a maximum torque of 204 horsepower and 265 Nm. This engine outputs its maximum power at 6000 rpm and its maximum torque between 1500 to 4500 rpm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission.
Was this review help?
5
1
Share
More Forum Discussions

Is it normal to drive 600 kilometers with 50 liters of fuel?

50 liters of gasoline for 600 kilometers translates to 8.5 liters per 100 kilometers. This is normal for engines with a displacement of 1.8 liters or above, but if the displacement is below 1.8L, the fuel consumption is considered high. Tips to reduce fuel consumption: 1. Start slowly: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. A gentle start shortens the engine warm-up time and improves fuel efficiency, saving fuel. 2. Light acceleration, light braking, early braking: Hard acceleration increases CO2 emissions and significantly raises fuel consumption. Therefore, while driving, press the accelerator lightly, avoid sudden increases in engine RPM, and prevent the car from shaking during driving to save fuel. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can improve by up to 20%. 3. Maintain proper tire pressure: Keep tire pressure at the manufacturer's recommended level. For every 2 PSI below the recommended value (approximately 0.2 in metric units compared to the standard pressure of 2.4), fuel consumption increases by 1%. Avoid using winter tires all year round, as this can increase fuel consumption by 10%. Use winter tires only when necessary. 4. Regularly organize the trunk: Extra weight increases the car's load, thereby increasing fuel consumption. Many car owners like to keep items in the trunk for emergencies, but even small increases in vehicle weight affect fuel consumption. Therefore, regularly check the trunk for unnecessary items.
10
1
Share

Should You Press the Clutch When Making a U-Turn?

It depends on the actual situation. It's generally better not to press the clutch. Light braking is sufficient when making a U-turn. Pressing the clutch in an emergency might cause the engine to stall due to panic. Below are some techniques for making a U-turn while driving: 1. Forward U-turn. Generally, if conditions permit and the road is wide enough, beginners can use a large detour method to make a U-turn. On wider roads, this method is simpler and easier to execute. Even in areas with traffic control, you can signal your intention to make a U-turn in advance, wait for permission, then reduce speed, shift to a lower gear, honk the horn, and proceed slowly to complete the turn. 2. Combination of Forward and Reverse U-turn. If the road is too narrow for a single forward U-turn, you can use a combination of advancing and reversing. When making a U-turn, choose a safe section of the road and signal a left turn. Failing to use the turn signal could lead to a traffic accident. As the front wheels approach the roadside or the front of the vehicle nears an obstacle, press the clutch, lightly tap the brake pedal, and before the vehicle comes to a complete stop, quickly turn the steering wheel fully to the right to align the front wheels for reversing. Then, stop the vehicle immediately. 3. When reversing, observe the rear of the vehicle carefully, then start slowly and turn the steering wheel fully to the right. As the rear wheels approach the roadside or the rear of the vehicle nears an obstacle, immediately press the clutch pedal, lightly tap the brake pedal to stop, and take advantage of this moment to quickly turn the steering wheel to the left. This aligns the front wheels for moving forward. If the turn isn't complete, you may need to repeat the process of reversing and advancing a few times until the U-turn is successfully executed.
2
2
Share

Is Volkswagen a German Car?

Volkswagen is a German car brand, with its headquarters located in Wolfsburg, Germany. Here are some details about Volkswagen: 1. The Volkswagen models in China are Sino-German joint ventures, operated jointly by SAIC Group and Volkswagen Group. 2. FAW-Volkswagen produces models such as Sagitar, Jetta, Magotan, Bora, Golf, and Tayron. 3. SAIC Volkswagen offers models including Santana, Passat, Polo, Lavida, Tiguan, and Teramont X.
7
1
Share

Can I Drive with 30% Oil Life Remaining?

When the oil life is below 30%, you can still continue driving without significant risks. However, if it drops to just 5%, it's best to visit a 4S shop for maintenance. Below is additional information on oil maintenance: 1. When the oil usage exceeds the specified time or mileage: It must be replaced. If it exceeds the expiration date, the lubricating and adhesive properties of the oil will degrade, leading to unnecessary engine wear. 2. Oil lifespan: Conventional oil typically lasts 100 to 150 hours, while synthetic oil can last 200 to 300 hours.
4
2
Share

What to Do When the Average Fuel Consumption of the Regal Increases?

The solutions to the increased average fuel consumption of the Regal are as follows: 1. Maintain a reasonable driving speed: Try to drive at a constant speed during the journey, avoiding sudden acceleration or hard braking. 2. Avoid idling: Avoid unnecessary idling. Generally, idling for more than one minute consumes more fuel than restarting the engine. Therefore, if the parking time is long, the engine can be turned off. 3. Clean the spark plugs: Adjust the electrode gap of the spark plugs appropriately and keep them clean. Otherwise, it will affect the quality of the spark and increase fuel consumption.
10
1
Share

Precautions for Facial Recognition in Subject 2 Exam

Make sure your entire face is captured during recognition. Keep your forehead hair tidy, remove glasses if wearing any, and remain still. A confirmation sound will indicate successful recognition. Reasons for facial recognition failure are as follows: 1. Network status: Device lacks internet connection or has poor signal, preventing data upload to terminal and next-step execution. 2. Lighting conditions: Environment is too dark for the device to clearly identify faces. 3. Software version: Device hasn't updated to the latest system-pushed version, affecting data transmission to terminal.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.