What are the hidden features of the Envision 1.5T Elite Edition?

What to Do If There Is Too Much Engine Oil in the Car?

If there is too much engine oil in the car, you should quickly find a tool to remove the excess. Otherwise, it may lead to the following issues: 1. Reduced engine power output. When the engine is running, the crankshaft and connecting rod big end move rapidly. If there is too much oil, the crankshaft and connecting rod will cause intense agitation. The agitation of the oil by the crankshaft and connecting rod consumes energy, which indirectly reduces the engine's power output and increases fuel consumption. Additionally, excessive oil reduces engine power output, leading to symptoms such as sluggish acceleration, muffled engine sound, and increased noise. 2. Blue smoke from the exhaust pipe. Excessive oil will inevitably lead to oil splashing due to the rapid movement of the crankshaft and connecting rod big end. A large amount of splashed oil may enter the combustion chamber and burn, resulting in blue smoke from the exhaust pipe, commonly known as 'burning oil.' 'Burning oil' is also a sign of excessive fuel consumption.

3

5

Share

How to Perform Car Polishing?

Car polishing operation steps are as follows: 1. Wash the entire vehicle. Use a paint cleaner with strong degreasing power to clean the whole car. When using the cleaner, avoid particles and dust causing new scratches during grinding. 2. Sand with water sandpaper. For defects such as coarse particles, fine sandpaper marks, or flow marks on the paint surface, use 600#~1000# water sandpaper wrapped around a small rubber block with water to gently sand until smooth (be careful not to sand through the paint layer). 3. Coarse and fine grinding. Use a mechanical grinder (electric or pneumatic) with coarse grinding paste to grind the marks left by the water sandpaper; then use fine grinding paste for polishing. 4. Polishing. Use a mechanical polisher with a mirror finish treatment agent to remove the swirl marks left by the coarse grinding paste, achieving a mirror-like finish on the paint film.

12

3

Share

Has the Honda Haoying's A-pillar been reinforced?

Honda Haoying's A-pillar has been reinforced. The following is an introduction to the Honda Haoying related content: 1. Advantages of the Haoying: Advantages: Honda has equipped this car with a 4-wheel independent suspension system. The suspension tuning style is not significantly different from the CRV. It can absorb obvious vibrations at road joints or speed bumps, and passengers inside the cabin will not feel obvious bumps. The resilient chassis tuning is somewhat similar to German cars. 2. Powertrain: The Haoying is equipped with the same 1.5t fuel and 2.0L hybrid systems as the CRV. The output horsepower of these two engines is 193ps and 145ps respectively, matched with a 6-speed manual CVT, continuously variable transmission, and e-CVT continuously variable transmission. Driving this car in urban areas, you can feel the linear power output of the engine, and the smoothness of gear shifting can be ensured with the CVT continuously variable transmission.

12

2

Share

What Causes the Heavy Steering Wheel in Honda Vezel?

Here are the reasons why the steering wheel of Honda Vezel feels heavy: 1. Power steering pump failure: Oil leakage in the power steering pump pipe, insufficient oil in the oil cup causing heavy steering, or a broken power steering pump belt leading to the pump not working and resulting in heavy steering. If the power steering pump is damaged and not functioning, the steering will be heavy. Solution for heavy car steering wheel: Check whether there is a fault in the oil pressure or oil circuit of the power steering pump. 2. Steering wheel malfunction: Generally connected to the steering shaft via splines, its function is to convert the force applied by the driver on the edge of the steering wheel into torque and transmit it to the steering shaft. Using a steering wheel with a larger diameter can reduce the hand force required from the driver when turning. The steering transmission shaft, as a connecting component between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel in the vehicle more reasonable.

4

0

Share

Where is the Mercedes-Benz 282914 engine produced?

Mercedes-Benz 282914 engine is produced by Daimler AG. Here is an introduction to Mercedes-Benz related content: 1. Mercedes-Benz SAM: The control unit, namely the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing a safety hazard. 2. Mercedes-Benz: A German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automobile and brand logos in the world. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models. Currently, it mainly produces A-Class cars, C-Class cars (mid-range sedans and sports cars), E-Class cars (high-end sedans and sports cars), S-Class cars (luxury sedans and sports cars), and G-Class cars (SUV off-road vehicles).

8

5

Share

What to Do When the Engine Yellow Light on the Car Dashboard Comes On?

There are two scenarios when the engine yellow light on the car dashboard comes on: 1. When the car's power is turned on, the vehicle performs a self-check. During this time, not only the engine yellow light but also other warning lights will illuminate and then turn off together. This is a normal phenomenon. 2. If the engine yellow light remains on after the car is started, it indicates that the ECU is alerting you to a potential engine fault, which is abnormal. The engine yellow light could be triggered by a sensor malfunction or a false alarm. In such cases, you may continue driving temporarily, but for safety reasons, it's best to drive at low to medium speeds and immediately head to the nearest repair shop for inspection.

8

1

Share

What are the hidden features of the Envision 1.5T Elite Edition?

What to Do If There Is Too Much Engine Oil in the Car?

How to Perform Car Polishing?

Has the Honda Haoying's A-pillar been reinforced?

What Causes the Heavy Steering Wheel in Honda Vezel?

Where is the Mercedes-Benz 282914 engine produced?

What to Do When the Engine Yellow Light on the Car Dashboard Comes On?

How to Turn Off the Dash Cam in a Car?

What are the benefits of modifying shock absorbers for a car?

Can a Car with a Patched Tire Drive on the Highway?

Where is the gasoline filter of Besturn X40 located?