···
Log in / Register

What are the hidden features of the 2021 Emgrand GL?

1 Answers
StAubree
07/29/25 12:41pm
Here is an introduction to the hidden features of the 2021 Emgrand GL: 1. Trunk escape passage: Fold down the rear seats to access the trunk, which requires crawling forward. Then, pull out the mechanical key and insert it into the small hole. Slide it in the correct direction to open. In case of the car submerging in water, prioritize escaping through the doors or windows, with the trunk being the last resort. Drive safely. 2. Child safety lock: Geely incorporates Volvo's door technology, requiring the door handle to be pulled twice to open. When children are seated alone in the rear, the lock can be engaged, allowing the door to be opened only from the outside. 3. Adjustable seatbelt height: Press the buckle down to adjust the seatbelt position up or down, ensuring it matches the passenger's height for comfort and safety, maximizing the seatbelt's effectiveness without straining the neck. 4. Rear reading light: Located overhead, it's often overlooked due to its position. However, it's not recommended to keep it on for extended periods, as excessive interior brightness at night can visually impair driving.
Was this review help?
4
0
Share
More Forum Discussions

Why doesn't the car move after releasing the handbrake?

The reasons why a car doesn't move after releasing the handbrake are as follows: 1. Insufficient power assistance: This indicates a decline in the car's performance, resulting in inadequate power assistance and insufficient power to move. 2. Road conditions: Due to the limited power assistance, on very steep roads, the car's power assistance may not be enough to propel the vehicle forward. 3. Handbrake damage: The handbrake, technically known as an auxiliary brake, operates differently from the main brake system. It uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible. This long-term use reduces effectiveness and increases the handbrake's travel distance.
7
1
Share

What Causes the Sudden Heavy Steering Wheel in an Audi?

Audi steering wheel suddenly becoming heavy is caused by: 1. Insufficient tire pressure; 2. Contaminated power steering fluid; 3. Internal failure of the power steering system; 4. Poor bearing lubrication. The working principle of a vehicle's steering wheel is to transmit torque to the rack and pinion mechanism, thereby pushing the wheels to turn left or right. Solutions for a suddenly heavy Audi steering wheel include: 1. Replenishing hydraulic power steering fluid; 2. Replacing the circuit fuse; 3. Replacing the flat bearing and adding kingpin grease; 4. Increasing lubrication for the steering tie rod ball joint. Steering wheels are categorized into: single-spoke, dual-spoke, three-spoke, and four-spoke steering wheels.
9
0
Share

What is the difference between a W12 engine and a V12 engine?

The differences between a W12 engine and a V12 engine are: 1. Different structures: The W12 engine has a compact structure that can accommodate more cylinders; the V12 engine has a simple structure with good operational balance and small size. 2. Different arrangement methods: The W12 engine adopts a W-type arrangement; the V12 engine adopts a V-type arrangement. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, and electric motors. Its function is to convert the heat energy of gasoline into mechanical energy by expanding the gas after combustion in a sealed cylinder to push the piston to do work, thereby providing power for the car.
4
5
Share

What kind of oil should be used for brake fluid?

Brake fluid can be of castor oil alcohol type, synthetic type, or mineral oil type. The steps for replacing brake fluid are: 1. Park the vehicle on a flat surface, turn off the engine, open the hood, and drain the oil from the oil tank; 2. Use a funnel to fill the oil reservoir with new brake fluid; 3. Use a jack to lift the vehicle and start removing the tires from the rear wheels; 4. Remove the rubber dust cap on the brake caliper; 5. Use a wrench to loosen the drain screw and attach a rubber tube to it, connecting it to the drain bottle; 6. Press the brake pedal inside the vehicle while observing the draining process until the oil level in the engine compartment's oil reservoir reaches the lower limit; 7. Start the vehicle and perform a brake test in a relatively safe area.
14
2
Share

Where is the horn relay located in the BMW X1?

BMW X1 horn relay is located in the control cabinet or control box. The working principle of the relay is that when a certain voltage is applied to both ends of the coil, the coil generates current, thereby producing an electromagnetic effect. The armature, under the electromagnetic force, overcomes the pulling force of the return spring and is attracted to the iron core, driving the moving contact of the armature to connect with the stationary contact. Taking the 2021 BMW X1 as an example, it belongs to the compact SUV category, with body dimensions of: length 4565mm, width 1821mm, height 1620mm, wheelbase 2780mm, fuel tank capacity 61L, and trunk capacity 505L. The 2021 BMW X1 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 140PS, maximum power of 103kW, maximum torque of 220Nm, and is paired with a 7-speed dual-clutch transmission.
14
4
Share

What are the three conditions for a successful automotive claim?

There are three conditions for a successful automotive claim: 1. Three conditions: First, when compared with the contract, the event has caused additional costs to the contractor's project expenses or direct schedule losses. Second, the reason for the increased costs or schedule losses is not attributable to the contractor's behavioral responsibility or risk responsibility as stipulated in the contract. Third, the contractor submits a notice of claim intention and a claim report in accordance with the procedures or time specified in the contract. 2. Automotive claim settlement: Automotive claim settlement refers to the process where the car owner files a claim with the insurance company after a traffic accident. The basic workflow of claim settlement includes steps such as reporting the case, investigation and damage assessment, receiving and reviewing claim documents, calculation and review, approval, compensation, and case closure.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.