What are the hidden features of the 2020 Tiggo 8 Elite Edition?

1 Answers
Peeta
07/30/25 8:03am
The hidden feature of the Tiggo 8 Elite Edition is the remote start function with the key. When the car is locked, as long as you are within the range where the key can control the car, holding down the lock button for a long time will automatically start the car and turn on the automatic air conditioning at the temperature you set. Here is some additional information: 1. Chery Tiggo: Since its launch in 2005, the Tiggo has been exported to more than 80 countries and has won the trust and praise of over 400,000 users worldwide. With its excellent quality, it has become the only official designated vehicle for multiple international events. The Tiggo has formed a family lineup including the Classic Edition, Elite Edition, and DR European Edition. While reshaping the high-end image of Chinese independent brands, it has also become a domestically and internationally recognized independent brand model that meets international standards. 2. Car configuration: A stylish and sporty leisure vehicle, the classic interior blends with the fashionable and sporty exterior. The interior space is flexible and versatile, suitable for both business and family use. The ACTECO engine delivers strong performance, complemented by various technological configurations, providing more power and lower fuel consumption. Experience a new level of lifestyle with a comfortable driving experience, feel the passion in motion, and showcase fashion in passion.
Was this review help?
20
3
Share
More Forum Discussions

Should You Depress the Clutch During Curve Driving?

When driving through curves, you should half-depress the clutch to control the vehicle speed. Here are some techniques for curve driving: 1. Approaching the Test Area: When the in-car voice prompt begins, drive the vehicle to the entrance of the curve, adjusting it to the center of the road. Try to keep the outer front wheel close to the right edge of the curve. 2. Entering the Curve Zone: Drive the vehicle along the right side. When the left front corner aligns with the right edge line, turn the steering wheel one full turn to the left while making minor adjustments. Pay attention to the distance between the wheel and the curve edge in the right rearview mirror. 3. Completing the Right Edge Line: Keep the steering wheel steady until the right vertex of the hood touches the left edge line of the right turn, then straighten the wheel and proceed slowly. When the left 1/3 of the hood touches the left edge line, turn the wheel one full turn to the right while making minor adjustments to align the right front corner with the left edge line of the right turn. Follow the S-curve to the right to avoid crossing or leaving the line. 4. Exiting the S-Curve: When the hood is aligned with the exit, quickly straighten the wheel and continue driving out of the curve driving test area.
2
0
Share

Difference Between Reiz Electronic Shock Absorbers and Conventional Shock Absorbers?

The most significant differences lie in the damping fluid and electromagnetic coil. The viscosity of the damping fluid in electronic shock absorbers can be adjusted in real-time according to road conditions, whereas in hydraulic shock absorbers, the viscosity of the damping fluid is fixed after sealing. Below are the relevant explanations: 1. Working principle of electro-rheological shock absorbers: The working principle of electro-rheological shock absorbers, abbreviated as CVSA valve, involves a continuously variable servo valve. Its input comes from the current supplied by the suspension control module; under normal operating conditions, this current ranges between 0.3A (soft damping) and 1.6A (hard damping) to provide the internal coil with the output current, achieving the desired working pressure inside the shock absorber cylinder. 2. Working principle of magneto-rheological shock absorbers: Magneto-rheological shock absorbers utilize electromagnetic reactions to make real-time responses to road conditions and driving environments based on input information from sensors monitoring body and wheel movements.
6
2
Share

What engine does SAIC MG use?

MG is equipped with the 'Blue Core' SGE20T engine, jointly developed by SAIC Group and General Motors. This 1.5-liter turbocharged engine delivers a maximum power of 169 horsepower and a peak torque of 250 Nm. More information about MG engines is as follows: 1. MG Powertrain: MG engines are divided into two models, one is a 1.0T in-cylinder direct injection turbocharged engine, and the other is a 1.5L naturally aspirated engine with a maximum horsepower of 120 and a peak torque of 150 Nm. 2. Features of the Blue Core Series Engine: MG's 1.0T is one of SAIC's Blue Core series engines, with main technical features including in-cylinder direct injection system, dual variable valve timing, variable oil pump, water-cooled exhaust manifold, all-aluminum cylinder block, etc.
14
3
Share

Why does the clutch become stiff when the car's air conditioning is on?

This is a normal situation because when the air conditioning compressor is activated, the engine load increases, causing vibrations that make the clutch pedal feel stiff. Here is some related information about car air conditioning: 1. How to use the A/C button: When the weather is hot and you need to turn on the air conditioning to cool down, press the AC button, adjust the temperature control knob to the blue section, and then turn on the fan switch. The indicator light will illuminate, and the car's air conditioning compressor will start working, blowing cold air from the vents. 2. How car air conditioning works: When the air conditioning is turned on, air will blow out because the blower in the air conditioning system starts working. However, the air conditioning cooling system has not yet started because the compressor has not begun to operate.
1
3
Share

How many seconds does the Boyue Pro take to accelerate from 0 to 100 km/h?

According to official data, the Boyue Pro comes in two models: 1.8T and 2.0L. The 1.8T two-wheel-drive model accelerates from 0 to 100 km/h in 10 seconds, while the 2.0L four-wheel-drive model takes 11 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. For example, the BMW X2 has a maximum torque of 220 Nm and accelerates from 0 to 100 km/h in 9.6 seconds. The Boyue Pro 1.8T has a torque of 300 Nm and accelerates in 10 seconds. Transmission efficiency: The transmission is the medium for power transfer and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Boyue Pro is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). The higher the power-to-weight ratio, the faster the acceleration. For example, the BMW X2 has a power-to-weight ratio of 90 Hp/T and accelerates from 0 to 100 km/h in 9.6 seconds. The Boyue Pro has a power-to-weight ratio of 109 Hp/T and accelerates in 10 seconds.
11
2
Share

Where is the drainage hole located under the door of the Peugeot 3008?

The drainage hole under the door of the Peugeot 3008 is located beneath the door seal at the bottom of the door panel. Here are the specific details: 1. Introduction to the drainage hole: The drainage hole is primarily designed to drain rainwater that seeps into the door interior from the gaps around the windows. Vehicle drainage holes are outlets that allow accumulated water to drain out of the vehicle during rainy weather, and their principle and structure are very simple. 2. Distribution of drainage holes: The drainage holes in a car are generally located in areas such as the fuel tank cap, engine compartment, under the door panels, and sunroof. The most prone areas for clogging are the sunroof and engine compartment. The initial clogging of the sunroof drainage hole occurs at the entrance of the hole, which can be seen by opening the sunroof. At this stage, it is relatively easy to clean and can be done by oneself. Over time, the clog may move into the drainage hose, making it more difficult to unclog as it progresses further along the hose.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.