What are the hazards of tire pressure loss in BMW 3 Series?

1 Answers
BrielleMarie
07/29/25 8:26pm
Tire pressure loss in BMW 3 Series can increase tire body deformation, easily causing cracks on the tire sidewalls while generating flexing motion. This leads to excessive heat buildup, accelerating rubber aging, fatigue of the cord ply, and breakage of cord wires. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders. Causes of tire pressure loss: During vehicle usage, tire pressure loss may occur. If it's simply air leakage, inflation is sufficient. If the tire is damaged, timely repair or replacement is necessary. Tire pressure loss isn't terrifying - what matters is that owners understand its hazards and address it promptly to prevent accidents. Definition of tire pressure: Strictly speaking, it refers to the air pressure inside the tire. In automotive maintenance, while the engine is considered the heart of a car (its failure means the end of the vehicle's life), tire pressure is like the car's blood pressure. The level of tire pressure plays a crucial role in the vehicle's performance and power.
Was this review help?
7
3
Share
More Forum Discussions

How to Remove the Rearview Mirror Rain Guard Film?

The methods to remove the rearview mirror rain guard film are: 1. Use the warm air setting of a heater to blow warm air on the film for a while before peeling it off; 2. Locate the edge of the rain guard film at the corner of the rearview mirror and slowly peel it off. The methods to apply the rearview mirror rain guard film are: 1. Clean the outer surface of the vehicle's side mirror thoroughly; 2. Apply the rain guard film to the middle area of the outer rearview mirror. The rearview mirror rain guard film is made of nano-material, and its functions are: 1. Raindrops will not adhere to the lens to form water beads, allowing the driver to clearly see the traffic behind; 2. It buffers light, providing a soft reflection and reducing interference with visibility.
14
3
Share

What does ECM mean on a car?

Automobile ECM refers to the Engine Control Module, which has the function of continuously monitoring and controlling the normal operation of the engine. Below is a detailed introduction to automotive ECM: Importance of ECM: The automotive engine control module is one of the most important automotive electronics. It can provide the engine with the optimal air-fuel ratio mixture and the best ignition timing according to different engine conditions, ensuring the engine always operates in the best state. The engine's performance, power, fuel economy, and emissions are optimized. Working principle of ECM: During operation, the ECM collects information about various working states of the engine through various sensors (including temperature sensors, pressure sensors, rotation sensors, flow sensors, position sensors, oxygen sensors, knock sensors, etc.), and sends this information to the ECU via transmission lines.
17
4
Share

What is the purpose of recycling automotive three-way catalytic converters?

The reason for recycling three-way catalytic converters is that they contain many rare metals. These metals have the potential for recycling and reuse, so to avoid waste, there are specialized individuals who recycle three-way catalytic converters. Appearance: The three-way catalytic converter looks like a metal can from the outside, but inside it has a 'substrate' for purifying exhaust gases. This honeycomb-shaped ceramic substrate is coated with a precious metal slurry, primarily composed of platinum, rhodium, and palladium. Function: The precious metals act as catalysts, reducing hydrocarbons (HC) and carbon monoxide (CO) in the exhaust into water and CO2, while breaking down nitrogen oxides (NOx) into nitrogen and oxygen. This is the exhaust purification function of the three-way catalytic converter.
11
3
Share

Is it permissible not to display the annual vehicle inspection and insurance decals?

It is permissible not to display the vehicle insurance and annual inspection decals, as the vehicle inspection decals have now been digitized, and electronic insurance policies have replaced paper insurance policies and endorsements, carrying the same legal validity as their paper counterparts. Below are the specific details regarding vehicle insurance and annual inspections: Vehicle Insurance: The main types of vehicle insurance include: compulsory traffic insurance; vehicle damage insurance; third-party liability insurance; and no-deductible insurance. Additionally, there are other types of vehicle insurance such as comprehensive theft insurance, passenger liability insurance, scratch insurance, glass insurance, vehicle spontaneous combustion insurance, and water submersion insurance. Annual Inspection: Vehicle annual inspection refers to a mandatory examination for all vehicles that have obtained official license plates and registration certificates, equivalent to an annual physical examination for the vehicle in accordance with the 'Technical Conditions for Motor Vehicle Operation Safety.'
8
3
Share

What is the normal engine RPM at 120 km/h?

At 120 km/h, most vehicles' engine RPM ranges between 2500-3000. This specifically relates to engine displacement and the manufacturer's power tuning. The relationship between RPM and vehicle speed, along with influencing factors, are as follows: Relationship between RPM and vehicle speed: Generally, the higher the engine RPM, the higher the vehicle speed, showing a proportional relationship. The specific calculation formula is: Vehicle speed = RPM × Transmission ratio × Tire circumference. Influencing factors: Besides RPM affecting vehicle speed, the transmission ratio and tire circumference also influence it. Additionally, friction and air resistance are significant factors. It's noteworthy that once the engine reaches its rated power, increasing RPM won't raise the vehicle speed further, as the onboard computer will cut off fuel supply.
11
5
Share

Is the Subject 3 Test Graded by Machine or Human?

Subject 3 is graded by both machine and human evaluators. Some details may not be detected or captured by the computer system, which requires human judgment. Content of the Subject 3 Test: The road driving skills test for Subject 3 generally includes: pre-driving preparations, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Important Notes for the Subject 3 Test: During the test, remain calm and composed. Avoid letting nervousness affect your gear shifting and lighting operations, and do not lose points on the simplest procedures.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.