What Are the Hazards of Speeding While Driving?

1 Answers
LaGenevieve
07/30/25 4:13am
Speeding is one of the most common traffic violations and is highly likely to lead to severe accidents. The dangers of illegal speeding are mainly reflected in the following aspects: 1. Speeding affects the driver's vision. It narrows the driver's field of view, weakens their eyesight, prolongs reaction distances, and makes it difficult to effectively handle sudden hazards ahead. 2. Speeding extends the braking distance. The braking distance of a vehicle is mainly constrained by speed. Due to inertia, the faster the speed, the longer the braking distance, thereby increasing the likelihood of accidents. 3. Speeding affects the operational stability of the vehicle. Under the same conditions, if the speed doubles, the centrifugal force increases threefold. Excessive centrifugal force can easily cause the vehicle to lose control and roll over.
Was this review help?
16
3
Share
More Forum Discussions

What are the test items for the C2 license subject 2 exam?

C2 subject 2 exam items include: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. Below are the details for subject 2: 1. Reversing into a garage: This assesses the driver's ability to maneuver the vehicle in a confined space. Reversing into a garage is a key evaluation point in the driver's test, requiring the driver to correctly reverse the vehicle into the garage from both sides while in motion. 2. Parallel parking: Parallel parking is increasingly common in urban areas, especially as parking spaces in formal lots become scarce. Many areas now designate street-side spaces as 'parallel parking spots.' 3. Stopping and starting on a slope: This is another key evaluation point in subject 2. The test requires stopping at a fixed position on a slope with ≥10% gradient and ≥30 meters in length, assessing the coordination of steering, braking, and clutch control. The goal is to train drivers to accurately judge vehicle positioning and correctly use the brake, gear, and clutch for stopping and starting on uphill sections. 4. Right-angle turns: This evaluates the driver's ability to correctly steer and judge the difference between the inner and outer wheels when navigating sharp turns. The driver should engage first gear, release the handbrake, and slowly lift the clutch to maintain semi-clutch engagement while moving forward at a steady speed. The left wiper's left dot (first rivet) should align with the yellow line on the right edge of the road, maintaining a 20 cm distance. Then, focus on a point slightly ahead of the middle door lock on the left front door. 5. Curve driving: Commonly known as the S-curve, this test requires driving on an S-shaped road of specified width without crossing the edge lines, demonstrating smooth steering control. It assesses the driver's ability to steer and control the vehicle through curves, aiming to develop skills in steering application and wheel trajectory management.
7
4
Share

Can Vehicles Undergo Annual Inspection in Another Location?

Large passenger buses and school buses cannot be inspected in another location. Currently, cross-province annual inspections for small cars, trucks, and medium-sized buses have been fully implemented. This means applicants can directly undergo the inspection in a city other than where the vehicle is registered and apply for the inspection compliance mark. Documents required for annual inspection: Original ID card or the original ID card of the agent; original vehicle registration certificate; copy of compulsory traffic insurance; proof of vehicle and vessel tax. Annual inspection content: Check whether the engine, chassis, body, and ancillary equipment are clean, complete, and functional, whether the paint is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records; Test whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles"; Check whether the vehicle has been modified, altered, or transformed, whether the registration details on the vehicle registration certificate, license plate, and vehicle records match the actual condition, and whether any changes have been approved and documented; Check whether the license plate, registration certificate, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether they need replacement; For large vehicles, check whether the unit name or the name of the street, township, or town where the vehicle is located and the seating capacity of the driver's compartment are printed in imitation Song font on both sides of the door as required; For trucks, check whether the rear tailgate (including the trailer's rear tailgate) exterior displays the vehicle number enlarged 2-3 times as required, and whether the sides of the door display the word "individual" for privately owned or jointly operated vehicles. The text must be clear, and unit codes or other patterns are not allowed (special cases require approval from the vehicle management office).
5
1
Share

How to solve the abnormal noise of Roewe RX5 sunroof on bumpy roads?

To address the abnormal noise from the Roewe RX5 sunroof on bumpy roads, first identify the cause of the noise. If the sealing ring is aged, it needs to be replaced with a new one. If the screws are loose, tightening them can resolve the issue. Here are the specific methods: 1. Turn on the vehicle's ignition, press the sunroof switch button, and ensure the interior and exterior are quiet. Observe the sunroof's movement path to check for obvious up-and-down fluctuations. If present, it indicates component aging, and the parts must be replaced. 2. Loose screws can cause roof and sunroof noises and even pose a risk of the sunroof falling off. The solution is simple: locate the sunroof screws and tighten them. 3. Due to prolonged use, debris particles may accumulate on the sliding tracks. When the sunroof moves along these tracks, it can rub against the debris, causing abnormal noise. Therefore, it is essential to keep the tracks clean. Apply lubricant to both sides of the sunroof tracks, paying extra attention to areas where noise was previously detected, as these spots experience the most friction.
1
3
Share

How to Set Cruise Control in a Vehicle?

After the system is activated and the vehicle reaches the desired speed, press button B (SET) to maintain the vehicle at that speed continuously. Once the cruising speed is set, you can still accelerate using the throttle pedal as usual. When the throttle pedal is released, the system will restore the vehicle speed to the set cruising speed. Here is some related information about cruise control: The cruise control system reads the pulse signal from the speed sensor and compares it with the set speed, then issues commands to the servo mechanism to adjust the throttle opening, either increasing or decreasing it, to keep the vehicle at the set speed.
17
2
Share

What to Do When the Smart Key is Not Detected?

There are generally four situations when the car cannot detect the smart key: 1. The key's transmitter is damaged. 2. The car's receiver is damaged. 3. The door lock is damaged. 4. The battery in the key is dead. All the above issues can be checked and resolved at a regular repair station. Generally, there are two types of keys with sensing functions: 1. Conventional folding mechanical keys. 2. Hidden mechanical keys. If it is a conventional folding key, you can directly use the mechanical key to open the door when the battery is dead. If it is a hidden type, we need to find the mechanical key. Usually, the spare mechanical key is hidden inside the main key, which is not visible under normal circumstances. When needed, it can be pulled out and used as a conventional mechanical key.
2
1
Share

Where is the sunroof switch for the BMW 320i located?

The sunroof switch for the BMW 320i is located on the ceiling reading light area above the front seats. Here is additional information about the BMW 320i sunroof switch: 1. Automatic operation: Open: Pull the switch backward firmly. Close: Push the switch forward to close the sunroof. 2. Manual operation: Open: Gently pull the switch backward and hold it until the sunroof reaches the desired position. Close: Push the switch forward before reaching the desired position. 3. Panoramic sunroof glass lift: Press the center of the panoramic sunroof glass switch. The sunshade will automatically open, and the panoramic sunroof glass will begin to rise. Close: Push the button forward.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.