What Are the Hazards of Slamming Car Doors Too Hard?

2 Answers
McTravis
07/30/25 1:25am
The hazards of slamming car doors too hard are: 1. Deformation or detachment of the sealing strip; 2. Loosening of internal components leading to malfunction or abnormal noises; 3. Incomplete door closure, leaving a slight gap. Car doors provide access for drivers and passengers, isolate external disturbances, mitigate side impacts to some extent, and protect occupants. The design of car doors affects the vehicle's aesthetics, and their quality is primarily reflected in crash resistance, sealing performance, ease of opening and closing, and functional indicators. The crash resistance of car doors is particularly crucial, as the buffer distance is very short during side collisions, which can easily injure occupants.
Was this review help?
17
3
Share
DiStephanie
08/15/25 7:06am
Slamming the car door too hard is actually quite damaging. After driving for a long time, I've noticed that the door locks and hinges are the most vulnerable. Excessive force can accelerate their wear and tear, and over time, the door might not close tightly or even start creaking, requiring extra effort to push shut. The weatherstripping can also get crushed and age faster, leading to drafts and leaks during rain or windy days, making the interior uncomfortably chilly. The impact can even affect the car's electronic components—my friend's sound system failed after frequent rough door slamming. This habit also leaves a bad impression, and if others follow suit, the car's condition worsens. So, I always remind passengers to gently push the door with moderate force, letting it latch naturally. Regularly applying lubricant to the hinges can also reduce damage and extend the door's lifespan.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

How to Judge the Distance Between the Right Side of the Car and Obstacles?

Methods to judge the distance between the right side of the car and obstacles: 1. Height: Mainly estimated based on the comparison of the blocked height. 2. Distance from the roadside: Determine the position of the roadside in the windshield (the left wheel is 10-15cm to the right from the left pillar of the windshield; the right wheel is 5-10cm to the left from the center line of the windshield); the distance from the roadside can be seen from the rearview mirror. 3. Right wheel position: Determine the position of the right wheel (middle of the front of the car or right wiper): relative to the ground at one-third of the right side of the front cover. 4. Three-point alignment: When the eyes, the front edge of the car hood, and the point where the obstacle touches the ground are aligned, the obstacle is approximately 1.5 to 2 meters away from the front of the car.
5
5
Share

What does a sun exclamation mark on the dashboard mean?

On the dashboard, a sun exclamation mark is the brake pad warning light, indicating a brake pad fault, which serves as a reminder to replace the brake pads. When the front brake pads are nearing their wear limit, this warning will appear. It is recommended to check whether the brake pads need replacement. If the brake pads do not require replacement, adding some brake fluid may suffice. Before traveling, it is essential to inspect the braking system for normal operation, including the wear level of the brake pads. Additionally, ensure that the power steering fluid is sufficient. Special attention should be paid to the dust cover of the brake system's wheel cylinder. If this component is damaged and allows dust to enter, it can cause the piston to malfunction, leading to an increased braking distance when applying the brakes. If water enters this component, it can mix with the brake fluid, resulting in brake failure.
19
4
Share

Where is the license plate 'Yi B' from?

Currently, there is no license plate with the prefix 'Yi B'. However, there is a license plate with the prefix 'Ji B', which belongs to Tangshan City, Hebei Province. 'Ji' is the abbreviation for Hebei Province. The license plate codes range from Ji A to Ji T, where Ji A is Shijiazhuang, Ji B is Tangshan, Ji C is Qinhuangdao, Ji D is Handan, Ji E is Xingtai, Ji F is Baoding, Ji G is Zhangjiakou, Ji H is Chengde, Ji J is Cangzhou, Ji O is for provincial government agencies, Ji R is Langfang, and Ji T is Hengshui. The first character of a license plate is a Chinese character representing the abbreviation of the province where the vehicle is registered. The second character is an English letter representing the code for the prefecture-level city where the vehicle is registered. The general rule is that 'A' represents the provincial capital, 'B' represents the second largest city in the province, 'C' represents the third largest city, and so on.
8
3
Share

What is the difference between 98 and 95 octane gasoline?

Here are the specific differences between 95 octane and 98 octane gasoline: 1. Compression ratio: Vehicles with a compression ratio between 8.5-9.5 should generally use 95 octane gasoline; cars with a compression ratio greater than 9.5 should use 98 octane gasoline. 2. Octane rating: 95 octane gasoline has a lower octane rating than 98 octane gasoline. That is, 95 octane gasoline contains 95% isooctane, while 98 octane gasoline has an octane rating of 98%. The gasoline grade represents the octane rating of the gasoline. For example, 95 octane gasoline consists of approximately 95% isooctane and 5% n-heptane. Since isooctane has better anti-knock properties and n-heptane has poorer anti-knock properties, a higher grade indicates a higher octane rating, meaning the gasoline has better anti-knock performance.
4
2
Share

What is the correct foot placement while driving?

Under normal circumstances, the right foot should alternate between the accelerator pedal and the brake pedal, while the left foot remains idle. Below are driving tips for automatic transmission vehicles: 1. Starting technique: Before starting, press the brake pedal, and ensure the gear is in P (Park) or N (Neutral) position. After ignition, shift into the appropriate gear. 2. Overtaking technique: After pressing the accelerator, when the RPM rises to the gear shift range (approximately 2000-2500 RPM), slightly release the accelerator and then press it again for smoother gear shifting. 3. Low gear usage technique: When driving on slopes, frequent gear shifting can increase wear on the transmission friction plates. Therefore, select L, 1, or 2 gear based on the slope gradient to maintain the transmission in that gear. Forcing the gear to lock can effectively protect the friction plates and extend their lifespan.
7
5
Share

Do I pay the vehicle purchase tax myself when buying a car at a 4S store?

Vehicle purchase tax can be paid either by the 4S store on your behalf or by yourself. Below is relevant information about vehicle purchase tax: 1. Single tax rate: Vehicle purchase tax is levied at a unified proportional rate, featuring stability that doesn't fluctuate with the taxable amount, making calculation simple and burden predictable, which facilitates lawful tax collection. 2. Role of vehicle purchase tax: By imposing this tax, the state participates in the redistribution of national income, effectively converting part of consumption funds into fiscal revenue to raise more funds for national functional needs. As a consumption-stage tax, it demonstrates recurring characteristics - taxation occurs whenever taxpayers purchase or use taxable vehicles, ensuring timeliness superior to income tax or commodity tax.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.