What are the hazards of pressing both the brake and accelerator pedals simultaneously in an automatic transmission vehicle?

1 Answers
DelThomas
07/29/25 4:53pm
In automatic transmission vehicles, pressing both the brake and accelerator pedals simultaneously will prevent the car from moving. Generally, cars equipped with automatic transmissions (AT) adjust speed through the transmission control system, which automatically selects the appropriate gear based on engine speed and load, replacing the driver's subjective judgment and gear-shifting operations. In simple terms, an automatic transmission car is a "foolproof car." Simultaneously pressing the brake and accelerator in an automatic transmission vehicle can cause the following hazards: 1. Pressing both the accelerator and brake simultaneously can cause the engine to emit black smoke, and prolonged use can lead to engine burnout; 2. If the car is in neutral, it will not move, and the engine will roar; 3. If the car is in gear: for manual transmission vehicles, the outcome depends on the gear—high gears may cause the engine to stall, while low gears may result in insufficient braking force. If the engine has sufficient horsepower and the brakes are strong enough, the engine may overheat and burn out, or the clutch may slip until it is destroyed. In automatic transmission vehicles, this action can cause the transmission fluid to rapidly overheat.
Was this review help?
12
5
Share
More Forum Discussions

What are the body dimensions of the Magotan?

The body dimensions of the Magotan are: length 4865mm, width 1832mm, height 11471mm, with a wheelbase of 2871mm. Taking the 2021 Magotan as an example, it belongs to the mid-size car category, with a fuel tank capacity of 66 liters, a trunk capacity of 533 liters, and a curb weight of 1775kg. The 2021 Magotan features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
10
5
Share

Is Jetta a Domestic Car?

Jetta is not a domestic car; it is a compact family sedan jointly produced by China FAW Group Corporation and Volkswagen Group of Germany. Taking the 2020 Jetta 30th Anniversary Edition as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm and a fuel tank capacity of 51 liters. The 2020 Jetta 30th Anniversary Edition features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm.
3
0
Share

What is the break-in period for the Levin?

The break-in period for the Levin is 1,000 to 2,500 kilometers, which is divided into the initial 100 kilometers, the preliminary break-in of 200 kilometers, and the formation of an oxide film during the break-in period of 1,000 kilometers. Taking the 2021 Levin Basic Edition as an example, its body dimensions are: 4,640mm in length, 1,780mm in width, and 1,455mm in height, with a wheelbase of 2,700mm and a fuel tank capacity of 43 liters. The 2021 Levin Basic Edition features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 98 PS, a maximum power of 72 kW, and a maximum torque of 142 Nm.
19
0
Share

What is the method for replacing the battery in a Mercedes-Benz A-Class key?

The method for replacing the battery in a Mercedes-Benz A-Class key is: 1. Remove the car key; 2. Use a flat-head screwdriver to insert into the gap on the side of the key and open the key cover; 3. Take out the old battery and replace it with a new one. Taking the 2020 Sport version of the Mercedes-Benz A-Class as an example, its body dimensions are: length 4622mm, width 1796mm, height 1454mm, wheelbase 2799mm, and fuel tank capacity 43l. The 2020 Sport version of the Mercedes-Benz A-Class features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.3T turbocharged engine, producing a maximum horsepower of 163PS, maximum power of 120kW, and maximum torque of 250Nm.
5
1
Share

How to Remove the Navigation System in Highlander?

The steps to remove the navigation system in Highlander are: 1. Start the car and confirm that the vehicle condition information is normal; 2. Remove the air conditioning vents; 3. Pull out the air conditioning control panel and vehicle information panel; 4. Use a plastic pry tool to loosen the navigation all-in-one unit and remove the dashboard plastic components; 5. Take out the storage box and disconnect the tail wires, completing the navigation removal. The navigation modes include: 1. Path retrieval customization mode; 2. Site setting mode; 3. Map positioning mode. The functions of the navigation system are: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interaction interface; 5. Wireless communication.
15
3
Share

Do New Cars Need Gasoline Additives?

New cars do not need gasoline additives. The items for the first maintenance of a car are: 1. Replace engine oil, oil filter, gasoline filter, and air filter; 2. Check whether the level of the car's coolant meets the regulations; 3. Check the level of the brake and clutch fluid; 4. Check whether the oil level in the power steering fluid reservoir meets the regulations; 5. Check whether there is any oil leakage at the oil pipe interfaces; 6. Check the level of the battery fluid and the windshield washer fluid; 7. Check the tension and aging of the generator, air conditioning, water pump, and power steering pump belts; 8. Check the tire pressure and wear condition of the car; 9. Check whether the car's exhaust emissions meet the standards.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.