What are the hazards of not replacing transmission oil in time?

1 Answers
DeDaisy
07/25/25 1:23am
The hazards of not replacing transmission oil in time: 1. If the oil is used for too long without replacement, a lot of sludge will accumulate in the oil pan, because air and gasoline carry some impurities into the engine interior; 2. If the automatic transmission oil is not replaced for a long time, the metal debris in the transmission will increase, and when it reaches a certain level, it will affect the physical properties of the transmission oil, thereby impacting the engagement of the clutch plates and the operation of the gears; 3. Severe power loss will reduce the service life of the car. The main function of transmission oil is to keep the gear system clean and to lubricate the transmission device, extending its lifespan.
Was this review help?
4
2
Share
More Forum Discussions

How Do Beginner Drivers Judge the Distance Between Cars?

Methods for beginner drivers to judge the distance between cars include: 1. Judging the left-side distance: You can use fixed reference points on the car to determine the distance. When the midpoint of the left rearview mirror aligns with the left boundary line, the distance between the car and the boundary line is 1.5 meters; 2. Judging the right-side distance: When the white line is at the halfway point of the right side of the engine hood, the distance between the car and the right boundary line is 30 centimeters. When the white line is at one-third of the right side of the engine hood, the distance is 60 centimeters; 3. Judging the position of the right front corner: When the car is 20 centimeters away from an obstacle, the lowest visible point of the obstacle is at 80 centimeters.
2
3
Share

What brand is Horizon?

Horizon is a tire brand under the American Horizon brand. It is a professional tire company registered in the United States, Qingdao Coast Tire Co., Ltd., primarily serving the American replacement tire market, providing services such as tire sales, warehousing, logistics distribution, American product design technical support, product development, and market information. Relevant information about tires is as follows: 1. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 2. Tires are often used under complex and harsh conditions. During driving, they endure various deformations, loads, forces, and high and low-temperature effects. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
16
0
Share

How to Tell if the Car Body is Straight While Driving?

Methods to determine if the car body is straight while driving: You can use the central divider line or edge line of the road as a reference. When the vehicle is moving, if the markings visible in both side mirrors appear parallel to the car body, then the car body is aligned straight. Otherwise, minor adjustments are needed. For parking situations where no other cars are nearby, check through the rearview mirror whether the rear of the car is parallel to the road edge or parking lines. If there are adjacent vehicles, observe through the rearview mirror whether the distance to the neighboring car is equal at both front and rear - equal distances indicate proper alignment. If the rear of your car is too close to the adjacent vehicle or the front is too close to it, this indicates the car body is at an angle.
13
3
Share

What does 265/65r17 mean?

265/65r17 is the specification of a tire. 265 refers to the tire width of 265mm, 65 refers to the aspect ratio, meaning the section height is 65% of the width. R indicates that the tire is a radial tire, and 17 means the rim diameter is 17 inches. Tires with a high aspect ratio have longer sidewalls, providing better cushioning and relatively more comfort, but weaker resistance during turns. Conversely, tires with a low aspect ratio and large inner diameter have shorter sidewalls and wider treads, resulting in a larger contact area and the ability to withstand greater pressure. They are more sensitive to the road surface and offer greater lateral resistance during turns. The normal tire pressure for a car ranges between 230-250kpa. However, the specific normal tire pressure should be based on the manufacturer's recommended value, which can usually be found in the vehicle's user manual, on the label near the driver's side door (B-pillar), in the drawer next to the driver's seat, or on the fuel tank cap. Car owners should develop the habit of regularly checking tire pressure. If the tire pressure frequently exceeds 20% of the normal pressure, the tire's lifespan will decrease by 10%; if it frequently falls below 30% of the normal pressure, the tire's lifespan will be reduced by 52%.
2
1
Share

How to Reverse a Car for Beginners?

When reversing as a beginner, pay attention to the following: 1. Before reversing, first check the situation behind the car, estimate the path of reversing, and determine whether the front of the car will hit any obstacles; 2. According to the direction the rear of the car needs to move, turn the steering wheel with both hands; 3. During the reversing process, do not keep looking behind the car. While ensuring safety behind, observe the left and right rearview mirrors from time to time. It should be noted that when reversing downhill, do not use neutral gear for reversing, as it makes speed control difficult. Especially on slippery downhill roads, stepping on the brake or clutch pedal can cause the car to skid or lose control. The correct method is to engage reverse gear, release the handbrake, and use the engine's drag effect to reverse smoothly.
7
4
Share

What Lights Should You Use When Driving in Heavy Rain?

When driving in heavy rain, you should turn on the rear fog lights. The red tail lights themselves have excellent penetration, and ordinary heavy rain cannot block their light. Rear fog lights are very bright and are designed to penetrate thick fog. Using them in regular rainy conditions can easily dazzle the drivers behind you, which may affect their visibility and compromise your safety. Driving without lights in rainy conditions can directly impair the judgment of the car in front regarding the situation behind, making it difficult to determine the position, distance, and speed of the following vehicle. If the car in front changes lanes or turns without clear information, it could easily lead to a rear-end collision.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.