What Are the Hazards of Frequent Lane Changes While Driving?

1 Answers
Nicholas
07/29/25 3:37pm
It can disrupt normal traffic order, affect the normal driving of other vehicles, and lead to traffic accidents. Below are some relevant introductions about driving: Precautions: Strictly adhere to traffic regulations, control the steering wheel properly while driving, perform car maintenance before departure, and be cautious when driving at night as a beginner. It is required to display the vehicle license plate, place the inspection qualification mark and insurance mark, and carry the vehicle registration certificate. Tips: Actively switch to low beam when meeting another vehicle at night, and avoid using high beam to illuminate oncoming vehicles. If the road ahead is not visible due to the high beam of an oncoming vehicle, stop and wait until the road is clearly visible before proceeding.
Was this review help?
11
0
Share
More Forum Discussions

Where is the ETC tag placed?

The ETC installation position is generally in the upper-middle part of the front windshield for regular vehicles, while for large vehicles such as trucks and buses, it is installed in the lower-middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with pre-installed or later-added anti-explosion film, which may affect the signal transmission of the microwave communication link, it should be installed in the microwave sunroof strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the vehicle owner must provide their valid ID card and the original and photocopy of the vehicle registration certificate. If the application is handled by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is required, and the vehicle must be registered under an individual aged between 18 and 60. For company vehicles, the required documents include: A letter of introduction from the vehicle owner (with company seal); photocopy of the organization code certificate or business license (with company seal); original ID card of the proxy; original vehicle registration certificate; and the vehicle that needs to have ETC installed. Here are some precautions for installing ETC: Do not obstruct the driver's view. It is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which reduces the driver's field of vision. If ETC is installed without considering this, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas of the windshield and positions that may block the solar panel. Do not remove it casually once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. Once the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device.
10
4
Share

What Size Tube Can Pass Through the Fuel Tank Anti-Theft Screen?

Generally, a 1cm diameter oil extraction hose can pass through the car's fuel tank anti-theft screen. The anti-theft fuel tank refers to a new type of fuel tank that prevents oil theft by making it impossible for an oil suction pipe to enter the tank interior even if the fuel cap is damaged. Hard objects also cannot damage the wire mesh through the curved section of the fuel filler neck, effectively solving fuel theft issues. Methods for extracting oil through the fuel tank anti-theft screen: Open the engine hood and locate the gasoline pipes connecting the engine to the fuel tank. Typically, there are three pipes: one is the fuel supply pipe, which pumps gasoline from the fuel pump to the engine; another is the return pipe, sending unused gasoline back to the tank; and the third is the carbon canister pipe, connected to the carbon canister for absorbing gasoline vapors. If you cannot identify the corresponding pipes, remove all three and extend them with plastic tubing to a container for collecting gasoline. Ensure all connections are secure and leak-proof. Then, open the car's relay box, locate the fuel pump relay, remove it carefully, and use a wire to short-circuit pins 85 and 86 on the relay socket. Insert the key into the ignition switch and turn it to the "ON" position. For push-button start models, press the start button lightly without depressing the brake pedal. Gasoline will then flow out from the pipes. Once enough gasoline has been extracted, turn off the ignition, remove the short-circuit wire, reinsert the fuel pump relay, and finally reconnect all fuel pipes. Be sure to remember the correct connections to avoid errors. Always prioritize safety during the oil extraction process, ensuring no open flames or flammable materials are nearby, and take necessary fire prevention measures.
16
2
Share

Which car is the Phideon?

Volkswagen Phideon is the flagship model of SAIC Volkswagen, belonging to the C-class luxury sedan category and serving as a high-end business vehicle. Here are some key details about the Phideon: 1. The name 'PHIDEON' originates from the ancient Roman goddess 'Fides', symbolizing oath and faith. PHIDEON will become Volkswagen's first mid-to-large-sized car, bridging the market gap between the Phaeton and the Magotan. 2. The Volkswagen Phideon is equipped with a 3.0T V6 gasoline engine, delivering a maximum power output of 220kW (299PS).
12
3
Share

How to Match the Tire Pressure Monitoring System on Great Wall H6?

Great Wall H6 tire pressure monitoring system matching method is as follows: Connect the diagnostic tool to the CANbus diagnostic port. Select the tire position of the sensor. Place the setter near the tire valve of the sensor. Press the button corresponding to the sensor's tire position, and the indicator light will flash. When the indicator light stops flashing and receives the sensor's information, the matching is successful. Tire pressure monitoring is a real-time automatic monitoring of tire pressure during vehicle operation, which alerts the driver to tire leaks and low pressure to ensure driving safety.
19
1
Share

Can You Add Engine Oil to a Hot Car?

You can add engine oil to a hot car, and there is no difference between adding oil to a hot or cold car. Here is some relevant information about engine oil: Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Composition: Engine oil consists of two main components—base oil and additives. The base oil is the primary component of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance, providing additional properties. Additives are an essential part of lubricating oil.
15
0
Share

What Causes Low Pressure in the Fuel Rail System?

Low pressure in the fuel rail system can be caused by fuel line blockage, excessive water in the fuel, or issues with the common rail or injectors. Below is an introduction to the system: Overview: The fuel rail, also known as the high-pressure accumulator, is the fuel line pipe located before the injectors that supply fuel to the cylinders in an internal combustion engine. It includes a fuel inlet and seat pockets (or seats) connected to multiple injectors. Some fuel rails have a pressure regulator at one end. Function: The high-pressure fuel rail stores fuel while dampening pressure fluctuations caused by the high-pressure pump's fuel supply and the injectors' fuel injection, ensuring stable system pressure.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.