What Are the Hazards of Excessive Tire Pressure?

Why is there a strange noise when braking at low speed?

Strange noises when braking at low speed are a normal part of ABS activation. The working process of ABS is actually a cyclic process of locking and releasing, keeping the vehicle in a state of intermittent rolling near the lock-up point. Therefore, when you brake hard and trigger the ABS, it will produce a clunking sound, which is normal. In this situation, you should press the brake pedal firmly to the floor. For automatic transmission vehicles, the "clunk" sound when braking is mainly due to the electronic interaction between the braking system and the automatic transmission. The specific reasons are as follows: 1. Excessive wear of brake discs and brake pads: Both brake discs and brake pads are high-wear components. Each time you brake, these two parts rub against each other, leading to natural wear over time. When they are excessively worn, strange noises will occur, so regular inspection and replacement are necessary. Typically, brake pads should be replaced every 60,000 to 80,000 kilometers, while brake discs should be replaced every 100,000 to 120,000 kilometers. 2. Incorrect installation of brake pads: If the brake pads are installed backward or the model does not match, strange noises may also occur. You can have the brake pads reinstalled. When installing brake pads, it is recommended to go to a professional auto repair shop, especially for owners who have had their brake pads replaced at roadside stalls. 3. Other possible causes: Issues with the caliper, brake disc, or brake pads can all produce this noise. If the noise persists, the first thing to check is whether there is any dragging brake. Poor caliper reset can cause prolonged friction between the disc and the pad, which may produce strange noises under certain conditions. Additionally, if there are foreign objects on the brake pads or brake discs, this can also lead to strange noises.

12

4

Share

What are the four driving modes of the seventh-generation Elantra?

The seventh-generation Elantra offers four switchable driving modes: "ECO," "Normal," "Sport," and "Smart." The mode switch button is located on the upper left side of the center console, and the instrument panel mode will synchronize with the driving mode. Additional details about the seventh-generation Elantra are as follows: 1. Dimensions: The body dimensions of the seventh-generation Elantra are (length/width/height): 4680/1810/1415 (mm), with a wheelbase of 2720 (mm). The interior space is considered the best in its class, thanks to its short front overhang and long wheelbase design. 2. Interior: The seventh-generation Elantra features a highly technological interior, including a dual-screen setup for the instrument cluster and infotainment system (both 10.25 inches), which is a mainstream configuration. The center display is tilted 10° toward the driver for easier navigation viewing. The continuous air vents are rare in this segment, and the electronic gear shifter is designed to resemble a spacecraft thruster, with a small screen displaying the gear position. 3. Powertrain: The seventh-generation Elantra is equipped with Hyundai's Smartstream next-generation powertrain system, offering two options: a 1.5L engine and a 240TGDi engine. The 1.5L engine is paired with a CVT transmission (max power 84.5 kW, max torque 143.9 N·m, combined fuel consumption of 4.9 L/100 km), while the 240TGDi engine is paired with a 7DCT transmission (max power 103 kW, max torque 211 N·m, combined fuel consumption of 5.2 L/100 km).

1

5

Share

How Many Days Does It Normally Take to Learn Reverse Parking?

Reverse parking normally takes about three days to learn, with faster learners becoming proficient in just one or two days. Here are the operating techniques for reverse parking: 1. Idle Speed: Maintain a consistent speed using 1st gear or reverse gear idle speed. Start at the same speed you intend to drive. 2. Careful Observation: Control the timing of steering. During the reversing process, observe carefully to grasp the key points of steering and turn at the right moment. 3. Driving Path: Control the driving path. During the test, the car's path mainly depends on the speed of turning the steering wheel and the driving speed. When reversing, accurately align with the boundary lines and promptly adjust the direction to ensure the car enters the parking space straight.

3

1

Share

Must the theoretical test be taken on the same day after passing Subject 3?

It is not mandatory to take the theoretical test on the same day after passing Subject 3. Normally, you take Subject 3 first, followed by the theoretical test, and there can be a gap of several days in between. Below is relevant information about the Subject 3 test: 1. Failing the test: Each subject can be taken once, and if failed, a retake is allowed. If you do not attend the retake or fail it again, the current test session ends, and the applicant must reschedule the test. However, for Subject 2 and Subject 3, rescheduling must be done at least 10 days later. 2. Failing the theoretical test: If the Subject 3 safe driving theory test is failed, the passed road driving skills test results remain valid. The driving skills test permit is valid for three years, and the applicant must complete Subject 2 and Subject 3 within this period. If not completed within the validity period, any passed subject results will be voided.

2

3

Share

How Fast Can You Complete Subjects 2, 3, and 4?

Theoretically, the fastest time to obtain a driver's license is 35 days. There are two factors that affect the speed of obtaining a driver's license: one is the required training hours, and the other is the scheduling time for exams. 1. Each subject has a minimum hour requirement: Each subject has a minimum number of training hours that must be completed before being eligible to take the exam. The Ministry of Transport and the Ministry of Public Security issued the "Motor Vehicle Driver Training and Examination Syllabus," which specifies the requirements for a C1 driver's license: Subject 1 requires 12 hours, Subject 2 requires 16 hours, Subject 3 requires 24 hours, and Subject 4 requires 10 hours. Daily theoretical or practical training cannot exceed 4 hours. 2. Fixed time requirements for exam scheduling: Taking the exam requires scheduling, and there are fixed time requirements for scheduling exams. Articles 40 and 41 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" issued by the Ministry of Public Security state that applicants scheduling Subject 2 must wait at least 10 days after obtaining the learning permit before scheduling the exam; for Subject 3, they must wait at least 30 days after obtaining the learning permit before scheduling the exam.

16

2

Share

Is it necessary to repair scratched underbody paint?

It is necessary to repair scratched underbody paint, as severe scratches can puncture the oil pan, causing all the engine oil to leak out. Moreover, components such as the front suspension, front bumper, and exhaust pipe are particularly vulnerable to damage. The specific reasons are as follows: 1. The exhaust pipe, located at the bottom of the vehicle, is quite fragile: hitting hard objects like sharp rocks can even cause it to tear. Speed bumps are common and vary in height and shape. Some are higher or wider, and if drivers don’t slow down when going over them, the front bumper and exhaust pipe are likely to get damaged. 2. Bottoming out can cause scratches on the underbody: it can also lead to deformation of the underbody, and in severe cases, damage to the engine oil pan, though this is less likely. Scratched areas are prone to rust. 3. Brake fluid line leakage: most modern cars use hydraulic brake systems, and factory-installed brake lines are often made of rubber rather than metal or nylon. If bottoming out occurs, the first thing to check is whether the brake fluid line has ruptured. 4. Oil pan rupture: the oil pans of the engine and transmission are highly susceptible to cracking when bottoming out occurs, leading to oil leakage. This is the most easily noticeable damage, but it must be repaired promptly to avoid permanent damage to the engine.

19

2

Share

What Are the Hazards of Excessive Tire Pressure?

Why is there a strange noise when braking at low speed?

What are the four driving modes of the seventh-generation Elantra?

How Many Days Does It Normally Take to Learn Reverse Parking?

Must the theoretical test be taken on the same day after passing Subject 3?

How Fast Can You Complete Subjects 2, 3, and 4?

Is it necessary to repair scratched underbody paint?

What to Do If Your Driver's License Has Expired for One Month Without Renewal?

Does Shifting to a Lower Gear at High Speed Damage the Car?

Tips for Poor Wiper Performance in the Middle of Frameless Wipers?

Reasons for Electric Vehicle Brake Failure?