What Are the Hazards of a Failed Shock Absorber?

What is the normal position for the Leiling water temperature gauge?

On the Leiling water temperature gauge, the black dot between C and H indicates the water temperature, with C on the left representing 60 degrees and H on the right representing 110 degrees. The middle position indicates the normal water temperature. Common troubleshooting methods for abnormal water temperature are as follows: 1. If the temperature is too high or the temperature indicator light keeps flashing, stop and check whether the radiator coolant is normal and whether there are any leaks in the radiator, hoses, or joints. If no abnormalities are found during the external inspection, you can refill the coolant as required and continue driving. If the temperature remains high after driving for a while and you find the coolant level has decreased upon stopping to check, this is likely due to a sand hole or perforation in the cylinder block's water jacket causing leakage. This fault should be repaired upon discovery. 2. When the engine temperature is too high, you can touch the upper and lower hoses to determine the fault by their temperature difference. If there is a significant temperature difference between the two hoses, it can be concluded that the thermostat is not working. If you cannot purchase a replacement part immediately, you can remove the thermostat as an emergency measure. 3. If there is air in the cooling system, it can create an airlock, impairing coolant circulation and causing the engine temperature to rise too high. The following method can be used to bleed the air: Run the engine at high speed and gently unscrew the radiator cap until gas begins to escape. Some coolant may escape with the gas. Repeat this process several times until you feel all the gas has been released. After resolving the fault, replenish the coolant promptly.

8

4

Share

What are the differences between the Camry and the Avalon?

The differences between the Camry and the Avalon are as follows: 1. Different platforms: The Camry is under GAC Toyota, while the Avalon is under FAW Toyota. 2. Different body dimensions: The Camry measures 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm; the Avalon measures 4978mm in length, 1849mm in width, and 1435mm in height, with a wheelbase of 2870mm. 3. In terms of powertrain, both the Avalon and Camry are equipped with 2.0L and 2.5L engines, and both offer a hybrid version. The hybrid version is powered by a 2.5L engine. The 2.0L engine delivers a maximum power of 131kW and a maximum torque of 210Nm, while the 2.5L engine produces a maximum power of 154kW and a maximum torque of 250Nm. 4. In terms of exterior design, the Camry comes in two styles: a luxury version and a sport version, with the sport version being more visually appealing. The interior has also been updated with a more modern design. In contrast, the Avalon has a more conservative exterior but offers bolder interior color combinations, providing several different color options. Although both cars share the same powertrain, the Camry has better fuel economy due to its lighter body weight.

18

3

Share

What is the meaning of auto start-stop?

The auto start-stop system in vehicles refers to a system that automatically controls engine shutdown and ignition. When the vehicle comes to a temporary stop during driving, the engine automatically goes into a dormant state. This is mainly applicable in urban traffic situations such as waiting at traffic lights or during traffic congestion. For automatic transmission vehicles, once the car is started, the auto start-stop system is in normal working condition. When encountering a traffic light or stopping for other reasons, pressing the brake pedal will generally cause the engine to automatically shut down after two seconds. To start moving again, simply release the brake and press the accelerator, or gently turn the steering wheel, and the engine will restart. For manual transmission vehicles, when stopping, shifting to neutral, pulling the handbrake, and releasing the clutch will prompt the system to automatically shut down the engine upon recognizing these three actions. When the clutch is pressed again, the engine will automatically restart. Vehicles equipped with engine start-stop technology also have their air conditioning systems replaced with electric air conditioning. When the engine stops, the battery continues to power the air conditioning system. The steering mechanism is also replaced with electric power steering, as hydraulic power steering requires the engine to provide hydraulic pressure. Precautions for using auto start-stop: When driving on steep slopes, it is advisable to avoid using the auto start-stop system. Although the auto start-stop duration is brief, engine start-stop on a slope may lead to insufficient brake assistance. When driving through water, it is best to turn off the start-stop system. This prevents the engine from shutting down when stopping during driving, which could cause a sudden reduction in exhaust pressure. Water could then easily flow back from the exhaust pipe into the engine, making it unable to start.

10

5

Share

Does stopping in the middle of the road when the red light turns on count as running a red light?

If the vehicle stops in the middle and does not continue driving, it does not count as running a red light but rather as overstepping the stop line. Running a red light refers to the act of a motor vehicle violating traffic signal instructions by crossing the stop line and continuing to drive when the red light is on and prohibits passage. Determining a red-light violation requires at least three pieces of photographic evidence: the vehicle not having left the stop line when the red light turns on; the vehicle passing through the intersection when the red light turns on; and the vehicle having crossed the line and continuing to move forward when the red light turns on. The act of running a red light is clearly defined in the Road Traffic Safety Law. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection when the red light is on, it constitutes the traffic violation of running a red light. Running a red light occurs when a vehicle is within the stop line, the forward direction is already a red light, but the vehicle continues to move forward, with both the front and rear wheels ultimately crossing the stop line. This is determined through three photos captured by electronic cameras: A photo of the vehicle crossing the intersection stop line, including the red light and license plate number. A photo of the vehicle completely passing the stop line, including the red light and license plate number. A photo showing the vehicle continuing to move, comparing changes in the vehicle's position, including the red light and license plate number. Capturing these three photos confirms the act of running a red light. Running a red light is not considered illegal under the following circumstances: Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights. Photos of the violation may be blurred, and if the red light is mistakenly run, traffic police will not impose penalties. Emergency situations: If a citizen transports a critically ill patient, they can provide proof from the hospital or the rescued individual to the traffic police for verification. If confirmed, the violation record can be expunged. If possible, it is best to call an ambulance to avoid running a red light and causing a traffic accident. Police officer's direction: During peak commuting hours, traffic police may temporarily direct traffic at important intersections. Drivers must follow the officer's hand signals. Yielding to special vehicles: Yielding to ambulances, fire trucks, or other special vehicles. If a violation is captured by surveillance cameras while yielding to such vehicles, manual review will not record the act of running a red light. Even if recorded, one can apply for reconsideration with the traffic police department.

16

5

Share

How to Connect CarPlay to the Vehicle's Central Control?

Vehicle supports connecting to CarPlay via a USB cable. Simply connect your iPhone to the USB port inside the car using a USB cable. If the vehicle supports wireless CarPlay, first turn on the Bluetooth on the central control screen and connect.

19

0

Share

What is the installation method for Chicco car seats?

ISOFIX installation is very simple. First, you need to locate the ISOFIX anchor points on the rear seats of the car. After confirming there's no play by wiggling left and right, proceed to complete the final step.

19

1

Share

What Are the Hazards of a Failed Shock Absorber?

What is the normal position for the Leiling water temperature gauge?

What are the differences between the Camry and the Avalon?

What is the meaning of auto start-stop?

Does stopping in the middle of the road when the red light turns on count as running a red light?

How to Connect CarPlay to the Vehicle's Central Control?

What is the installation method for Chicco car seats?

How to activate the one-touch window lift function with the key for the 2021 CR-V?

What is the actual fuel consumption of the Mercedes-Benz E260?

What is the fuel consumption of the Hummer H2?

How to adjust the headlights of BYD F3?